Specs:
Pages: 969
Serial Numbers: 530111001 & Above, 530211001 & Above, A8NZ11001 - A8NZ59999, A8M411001 - A8M459999, A8NY11001 - A8NY59999, 530311001 - 530359999, 530411001 - 530459999, ABRT11001 - ABRT59999
Models / manufacturer or brand: S175 & S185 / Bobcat Company
Engine S175 specs: V2203-M-DI, 46hp
Engine S185 specs: V2003-M-DI-T, 122.1cu in, 4 cylinders, 56hp, 2800rpm.
Serial numbers or parts numbers: all
Model Identification Code: not defined
Manual/e-book format: PDF / .zip / .exe
Language: English (some of our manuals are multilingual)
Manual Language: English
Related:
Bobcat S175 Skid Steer Loader repair manual
/ Bobcat Company
Engine specs: V2203-M-DI, 46hp.
Serial numbers: S/N: A3L520001 & Above
Manual Language: English
Manual format: PDF / e-book (zip)
Printable: Yes
39.99 USD
#
³
10 tech specs about the Bobcat S185 Skid Steer Loader:
Related:
Bobcat S185 Skid Steer Loader repair manual
& Above - S/N A3LH11001 & Above
Model / brand or manufacturer: S185 / Bobcat Company
Engine specs: V2003-M-DI-T, 122.1cu in, 4 cylinders, 56hp, 2800rpm.
39.99 USD
1. Operating weight: 6,834 lbs
2. Rated operating capacity: 1,850 lbs
3. Tipping load: 3,700 lbs
4. Engine: Kubota V2003-M-DI-T
5. Horsepower: 74.3 hp
6. Operating pressure: 3,200 psi
7. Flow rate: 17.3 gpm
8. Lift path: Radial
9. Height to hinge pin: 131 inches
10. Width: 73 inches
-
10 repair tips for the Bobcat S175 Skid Steer Loader:
1. Regularly check and change the engine oil, air filter, and fuel filter to ensure the engine is running smoothly.
2. Keep the cooling system in good working order by checking the coolant levels and hoses for leaks.
3. Inspect the drive belts and pulleys for wear and replace them as needed.
4. Check the tires for proper inflation and wear.
5. Keep an eye on the fluid levels of the hydraulic system and change the filter regularly.
6. Check the air filter often and clean or replace it as necessary.
7. Use the right type of hydraulic oil and change it at the recommended intervals.
8. Check all of the hoses for leaks and wear and replace them if necessary.
9. Keep an eye on the wear of the bucket teeth and edges and replace them when they become too worn.
10. Regularly check the electrical system for any loose connections or corroded terminals.