Specs:
Serials: S/N 523611001 & Above, S/N 523711001 & Above
Model / brand: MT52 / Bobcat Company (Kubota)
Engine model/specs: D722-E3B-BC-6, 44cu in, 3 cylinders, diesel, 20hp, 3600rpm, 32.4lb ft, 2600rpm.
Production year(s): 2004, 2005, 2006, 2007.
Manual Language: English
Manual format: PDF / e-book (zip)
Printable: Yes
Delivery: Download link will appear on the checkout page after your payment is complete.
Payment method: PayPal, Credit or Debit Card
Related:
Bobcat 600, 600-D, 610, 611 skid steer loader repair manual
610, 611 / Bobcat Company
Engine specs (600): 25 hp, 18,6 kW, air cooled, gasoline.
Engine specs (610): Wisconsin, 30 hp, 22,4 kW, gasoline, 4
39.99 USD
#
³
10 repair tips for the Bobcat MT52 Track Loader:
1. Check and change the engine oil and oil filter regularly to ensure proper lubrication and to extend the life of the engine.
2. Inspect and clean the air filter to ensure that the engine is receiving enough air for combustion.
3. Check and adjust the tire pressure regularly for optimal performance and to extend the life of the tires.
4. Regularly inspect the hydraulic system and hoses for leaks, and replace any damaged parts as needed.
5. Check the drive belt and replace if showing signs of wear or if it is loose.
6. Inspect the fuel system and clean or replace the fuel filter as needed.
7. Check the battery terminals, cables and connections and clean if needed to ensure proper charging and starting of the engine.
8. Inspect the cooling system and clean or replace the radiator as needed to prevent overheating.
9. Check the track tension and adjust as necessary to ensure proper track alignment and to extend the life of the tracks.
10. Check the machine's attachment points and fasteners regularly and tighten or replace as needed to ensure that attachments are secure and will not come loose during operation.
-
20 tech specs about the Bobcat MT52 Track Loader:
1. Operating weight of 5,375 lbs
2. Rated operating capacity of 1,100 lbs
3. Tipping load of 2,200 lbs
4. Kubota D1703 diesel engine with a power output of 25.5 horsepower
5. 3 cylinder diesel engine
6. Hydrostatic transmission
7. Standard auxiliary hydraulic flow of 8.5 gallons per minute
8. Operating width of 47.5 inches
9. Operating height of 80 inches
10. Bucket width options range from 36 inches to 48 inches
11. Rated speed of 7.3 mph
12. Ground clearance of 10.6 inches
13. Fuel capacity of 12 gallons
14. Hydraulic system capacity of 8 gallons
15. Length of machine without attachment is 103 inches
16. Width of machine without attachment is 47.5 inches
17. Height of machine without attachment is 80 inches
18. Width of machine with attachment is 47.5 inches
19. Height of machine with attachment is 80 inches
20. Rated operating load at 50% of tipping load is 550 lbs
Please note that the above specs are for Bobcat MT52. As Bobcat MT52 is not a Track Loader, it is a compact wheel loader, it is not a good representation of Bobcat Track Loaders, I would suggest you to check the spec sheet of the specific model you are looking for.