To make it easier for you to choose the right manual, we have compiled various information for you below, such as model designations, types, and production years.
The listed models are covered in the manual: 763 & 763 High Flow G Series: Bobcat Company
Bobcat 763 Skid Steer Loader
Bobcat 763H Skid Steer Loader
S/N: 512250001 & Above
S/N: 512450001 & Above
S/N: 512620001 & Above
Serial numbers: 512250001-512450001-512620001
Engine specs: Kubota, V2203-EB, 134.3cu in, 4 cylinders, 46hp.
Production years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, onwards.
#
³
"Master Your Skid Steer Loader with the Bobcat Manual Download"
Take control of your Bobcat 763, 763H Skid Steer Loader and maximize its capabilities with our comprehensive manual. From engine specifications to maintenance tips, common issues to tuning suggestions, and a wide range of available accessories and attachments, this guide will equip you with the knowledge to optimize the performance and productivity of your Bobcat Skid Steer Loader. Get ready to tackle any job with confidence!
Engine Specifications/Technical Data:
• The Bobcat 763 and 763H Skid Steer Loaders are powered by a diesel engine for reliable performance.
• Engine type: Liquid-cooled, four-cylinder diesel engine.
• Displacement: The engine has a displacement of approximately 2.2 liters.
• Horsepower: The engine generates around 46 horsepower.
• Torque: The torque output of the engine is approximately 121 lb-ft.
• Fuel Capacity: The fuel tank can hold around 16 gallons of diesel fuel.
• Operating Weight: The operating weight of the Skid Steer Loader ranges from approximately 5,750 to 6,240 pounds, depending on the model and configuration.
• Rated Operating Capacity: The rated operating capacity varies between 1,500 and 1,700 pounds, depending on the model.
• Lift Height: The maximum lift height of the Skid Steer Loader ranges from approximately 10 to 11 feet, depending on the model and configuration.
• Auxiliary Hydraulic Flow: The auxiliary hydraulic flow rate ranges from approximately 14 to 16 gallons per minute, depending on the model and configuration.
• Travel Speed: The Skid Steer Loader offers a maximum travel speed of approximately 7.1 miles per hour.
• Tipping Load: The tipping load capacity ranges from approximately 3,000 to 3,500 pounds, depending on the model and configuration.
• Operating Capacity at 50% of Tipping Load: The operating capacity at 50% of tipping load ranges from approximately 1,500 to 1,750 pounds, depending on the model and configuration.
Facts and Details:
- The Bobcat 763 and 763H Skid Steer Loaders are compact yet powerful machines designed for versatility and efficiency.
- These Skid Steer Loaders feature a rugged construction and durable components, ensuring reliability and long service life.
- The operator's cab provides a comfortable and ergonomic working environment with excellent visibility for enhanced safety and productivity.
- The Skid Steer Loaders are equipped with intuitive controls for easy operation and maneuverability.
- The hydrostatic drive system allows for smooth and precise control of the machine's movements.
- The quick-attach system enables quick and easy attachment changes, maximizing productivity on various tasks.
- The Skid Steer Loaders offer a range of available attachments, including buckets, forks, grapples, augers, and more, for increased versatility and job site adaptability.
- The compact size of these loaders allows for maneuverability in tight spaces, making them ideal for construction, landscaping, and agricultural applications.
Maintenance Intervals and General Tips:
► Follow the manufacturer's recommended maintenance schedule outlined in the operator's manual for optimal performance and longevity.
► Regularly check and change the engine oil and filter as per the recommended intervals.
► Inspect and clean the air filter regularly to prevent clogging and ensure proper engine performance.
► Check and maintain proper tire pressure for optimal traction and stability.
► Grease all grease points as recommended to ensure smooth operation of the loader's components.
► Regularly inspect and tighten all bolts and fasteners to prevent loosening during operation.
► Keep the loader clean and free from debris to prevent overheating and ensure proper functioning of components.
Common Issues and Solutions:
* Hydraulic system leaks: Regularly inspect hydraulic lines, fittings, and seals for signs of leaks. Address any leaks promptly and replace damaged components or seals.
* Engine overheating: Ensure proper cooling system maintenance, including regular cleaning of the radiator and maintaining proper coolant levels. Address any issues with the cooling fan or thermostat promptly.
* Electrical issues: Check all electrical connections and wiring for loose connections or damage. Replace any faulty components or address wiring issues as needed.
* Tire wear and damage: Inspect tires regularly for wear and replace them when the tread depth reaches a critical level. Address any tire damage promptly to prevent accidents and maintain optimal traction.
Popular Tuning Tips or Modifications:
■ Upgrading to heavy-duty tires can enhance traction and stability on various terrains.
■ Adding auxiliary lighting can improve visibility in low-light conditions, increasing safety and productivity.
■ Installing a backup alarm or camera system can enhance operator awareness and prevent accidents.
■ Upgrading to a high-flow hydraulic system can provide increased attachment performance and speed.
Available Accessories, Attachments, and Aftermarket Options:
+ Various bucket sizes and types, including dirt buckets, snow buckets, and rock buckets.
+ Pallet forks for material handling and transportation.
+ Grapple attachments for brush and debris removal.
+ Auger attachments for digging holes.
+ Hydraulic breaker attachments for demolition work.
+ Sweeper attachments for cleaning and debris removal.
+ Mulching attachments for vegetation management.
Owner Reviews and Opinions:
Strengths:
☺ Reliable and durable construction, withstanding demanding work environments.
☺ Versatile and efficient for a wide range of applications.
☺ Excellent maneuverability and compact size for working in tight spaces.
☺ Easy-to-use controls and comfortable operator's cab.
☺ Quick-attach system for quick and easy attachment changes.
Weaknesses:
☻ Some owners have reported occasional hydraulic leaks or issues.
☻ Maintenance and repairs may require specialized knowledge or professional assistance.
Repairs That Need to Be Carried Out Most Frequently and Parts That Often Break:
→ Regular maintenance tasks such as oil changes, filter replacements, and fluid checks.
→ Hydraulic hose replacements or repairs due to wear or damage.
→ Electrical system repairs, such as addressing wiring issues or replacing faulty switches.
→ Drive belt replacements to maintain proper operation of the loader.
Enhance Your Bobcat Skid Steer Loader's Performance with the Bobcat Overhaul PDF Manual, available for immediate download. Unleash the Full Potential of Your Bobcat Skid Steer Loader with the Comprehensive PDF Manual by Bobcat, ready for instant download. After completing the payment, your download link for the official Bobcat OEM shop manual and parts list will be provided on the checkout page. Additionally, we will promptly email you the payment and download information for immediate access to the manual.
§
Comments