New Holland L160/L170 Skid Steer Parts Catalog, 2005–2007 (P/N 87659684 ML)

This CNH America parts catalog covers the New Holland L160 and L170 skid steer loaders. Revision 1 was issued October 1, 2007, as Book/Form Number 87659684 ML. Individual catalog sheets are dated through April 2008.

Searchable Parts Lists and PDF Format

Text search and navigation: Parts lists and the numerical index have searchable text. The illustrated examples that explain how to read the catalog are image-based. The PDF has no embedded bookmarks.

The download is one printable PDF with 1,168 pages, including the cover, revision history, contents, multilingual reference pages, and 15 notes pages. Detailed application notes are in English, with translated headings and part names throughout the catalog.

Engine, Drive, and Loader Parts

These selected parts listings show how the catalog is organized. Other entries include on-road beacon kits and chassis decals.

• Engine and fuel system: Exploded views of crankshafts and pistons, timing gear cases and governors, and fuel injection components for earlier and later engine assemblies.
• Ground drive: Final drives, right- and left-hand gearboxes, hydrostatic pumps and motors, and brakes, with separate listings for certain pilot-control assemblies.
• Loader hydraulics: Standard and high-flow gear pumps, boom and bucket cylinders, control-valve internals, and seal kits, with separate pilot-control and EH auxiliary-control listings.
• Electrical parts: Main and cab harnesses, fuse blocks, lighting, and the optional advanced instrument cluster, with separate listings for European cab components and U.S. and Canadian batteries.
• Cab, boom, and attachments: Mounting plates, hand and foot controls, cab heaters, doors, and seats, plus parts breakdowns for buckets, cutting-edge kits, and pallet forks.

Owners and shop staff can match numbered assembly drawings and application notes to the machine before ordering parts or planning a repair.

Engine Serial Breaks and Long Blocks

Cylinder-block, cylinder-head, camshaft, lubrication, and fuel-injection listings use serial breaks to distinguish earlier and later parts. Match the engine figure to the machine serial number and market, then check the notes for the individual part.

The L160 service long-block listings identify equipment supplied separately, including the starter, flywheel housing, cooling fan and related hardware, alternator and mounts, and exhaust manifold and gasket. The fuel-tank figures also distinguish round and square fuel-pump configurations.

Hydraulic Controls and Cab Fitment

High-flow diagrams distinguish machines with a toggle switch behind the left hydrostatic handle from those with a rocker switch on the ignition panel. Hand- and foot-control valve listings distinguish the applicable internals and seal kits.

Separate figures cover a second front auxiliary circuit, rear auxiliary hydraulics, enhanced boom float, and the hydraulic mounting-plate cylinder and sequencing valve. Standard and high-performance oil-cooler arrangements have separate listings.

Right-hand cab glass depends on throttle location. Seat and armrest listings also have fitment restrictions, including an armrest kit that is incompatible with suspension seats.

Part Numbers, Kits, and Ordering

The parts tables connect drawing callouts to part numbers, quantities, application notes, and hardware sizes, threads, or grades where specified. Supersession notes identify replacement numbers, kit entries show which items are supplied together, and NSS marks items that are not serviced separately. The numerical index leads from a part number back to its figure and reference position.

This is a parts identification catalog. Relief-valve ratings identify listed components. Overhaul, electrical troubleshooting, hydraulic pressure testing, and calibration procedures require the service manual.

Always verify the part number against the machine’s serial number and installed configuration before ordering. For work involving a raised boom or hydraulic pressure, follow the machine’s service and operator safety instructions.

Selected Cab Latch and Bucket Seal Dimensions

For the L160 and L170 cab doors, latch 87657601 has a 26.6 mm pin and fits frame 87652757 with slotted holes. Latch 87687979 has a 23.6 mm pin and fits frame 87690544 with square holes.

For both models, the bucket-cylinder parts list identifies the 2-1/4 in. seal as part 86570920. It also shows that this seal is included in kit 86570919.