2007 Infiniti M35/M45 Automatic Speed Control Device (ASCD) Manual
This manual covers Automatic Speed Control Device (ASCD) for the 2007 Infiniti M35 and M45 models, detailing system descriptions, preparation, and action tests. Ref: PFP:18930
Manual Preview
Sample pages from the 2007 Infiniti M35/M45 Automatic Speed Control Device (ASCD) Manual manual
Purchase & Download
Infiniti Models Covered & Key Technical Specifications
Models: Infiniti M35, Infiniti M45
Build Years: 2007
Technical Data:
- ICC system detection range: Approximately 390 ft (120 m)
- ICC maximum set speed: 144 km/h (90 MPH)
- ICC minimum set speed: 40 km/h (25 MPH)
- A/T fluid capacity: 10.3 liters (10-7/8 US qt, 9-1/8 Imp qt)
- Drain plug torque: 34 Nm (3.5 kg-m, 25 ft-lb)
- Level gauge bolt torque: 5.1 Nm (0.52 kg-m, 45 in-lb)
Infiniti Manual Features & Content Preview
2007 Infiniti M35/M45 Driver Assistance and Transmission Manual
- Covers 2007 Infiniti M35 and Infiniti M45, documenting the Intelligent Cruise Control (ICC), Accelerator Control System, and Automatic Transmission (AT) control logic
- Official Nissan/Infiniti publication, revision April 2007
- Contains 47 wiring schematics, 57 system diagrams, and 14 detailed diagnostic trouble code (DTC) charts
- Delivered as a direct download the moment payment clears
- Indexed PDF search covers every chapter and appendix
- Stored against your account so you can retrieve it after a hard-drive loss
- This 2007 edition remains the factory reference for the M35/M45 model lineup, specifically detailing the laser beam aiming and ICC integrated unit diagnostics
System Documentation
The 2007 Infiniti M35/M45 technical documentation details the operation and diagnostic parameters for the Intelligent Cruise Control (ICC) and automatic transmission systems. This publication maps the signal integration between the ECM, TCM, and ABS actuator, describing the interaction of the vehicle-to-vehicle distance control mode, conventional fixed-speed cruise control, and the brake assist preview function.
Additional sections document the shift mechanism construction and planetary gear arrangements for the VQ35DE and VK45DE engine configurations. Diagrams delineate the complex CAN communication structure between the combination meter, unified meter and A/C amplifier, and the ICC sensor integrated unit for accurate signal monitoring.
Specification and Calibration Data
Detailed calibration parameters for the ICC sensor integrated unit are presented alongside procedures for laser beam aiming adjustments. Sensor alignment requires a specific target board set at a distance of 3.9 meters (12.8 ft) from the front bumper. The manual also provides torque specifications for maintenance, including the 34 Nm (25 ft-lb) drain plug and 5.1 Nm (45 in-lb) level gauge bolt.
Diagnostic support includes failure-mode thresholds for sensors and control units, such as the 12V reference for stop lamp drive output signals and resistance values for steering wheel switch inputs. Note: This page is a contents overview for the manual. It does not provide repair or diagnostic instructions.
An official 2007 Infiniti M35/M45 workshop publication documenting the electronic control systems for the Automatic Speed Control Device and transmission shift logic, designed for vehicle-specific system diagnostics and technical reference.
Manual FAQ, Purchase & Download Details
Customer Reviews
Read what our customers say about this Infiniti Car manual and share your own experience.