2006 Mercedes-Benz E-Class Sedan Operator's Manual (P/N 211 584 18 71)

• Exact vehicle coverage: 2006 E 320 CDI (211.026), E 350 (211.056), E 350 4MATIC (211.087), E 500 (211.070), E 500 4MATIC (211.083), and E 55 AMG (211.076) sedans. This 521-page PDF is Mercedes-Benz Part No. 211 584 18 71, Order No. 6515 1157 13, USA Edition B 2006.
• Cockpit and control operation covers the instrument cluster, multifunction steering wheel and display menus, automatic transmission programs, memory functions, SmartKey/KEYLESS-GO, lighting, dual-zone and optional 4-zone climate control, power windows, and roof synchronization.
• Driving and chassis systems explains the operating logic, indicators, limitations, and driver responses for ABS, BAS, ESP, the electrohydraulic brake system, 4MATIC traction control, Distronic, Airmatic DC, and Parktronic.
• Operator-level fault guidance includes warning-lamp and multifunction-display charts that pair symptoms and messages with possible causes and recommended responses across braking, restraint, engine, charging, cooling, tire-pressure, lighting, and convenience systems.
• Roadside and emergency procedures address manual unlocking, emergency fuel-door release, gear-selector release, emergency roof operation, active-head-restraint reset, SmartKey batteries, serviceable bulbs, wiper blades, spare-wheel installation, jump starting, towing, and fuse locations.
• Model-specific procedures and equipment include E 320 CDI fuel-system bleeding and diesel operating information, E 55 AMG steering-wheel shifting and manual mode, the AMG collapsible spare, MOExtended tire operation, and configuration-specific wheel and tire fitments.
• Technical reference sections provide model-specific engine data, electrical specifications, dimensions and weights, capacities and approved-fluid categories, identification-label locations, and poly-V-belt routing illustrations for each covered powertrain.

Factory Operating Detail

This is the factory operator's manual for the covered W211 sedans, with labeled views of the cockpit, instrument cluster, multifunction steering wheel, center console, climate-control panels, and model-specific poly-V-belt drives. Mercedes-Benz describes the book as support information for the vehicle operator, so it is best suited to owners and drivers who need factory control behavior, warning-message guidance, and roadside procedures rather than component-level repair instructions.

The control-system section maps the steering-wheel menu structure, vehicle-status memory, trip computer, convenience and lighting settings, and option-dependent functions. Transmission coverage distinguishes the normal gear ranges and one-touch shifting from the E 55 AMG manual shift program, and it explains the limited operating strategy available when the transmission enters Limp Home Mode.

Practical Hints and Technical Data

The fault-reference material is useful when a warning lamp or cluster message is part of a customer complaint. It identifies likely causes and the appropriate operator response without presenting dealer diagnostic codes or workshop test sequences. The emergency chapters then cover the actions the driver may need at the roadside, including a flat tire, a discharged battery, a locked selector, a disabled SmartKey, or a diesel engine that has drawn air after the tank was run empty.

The technical-data section distinguishes the 272 gasoline V6, 113 gasoline V8 applications, and OM 648 diesel. It also identifies same-size and staggered wheel packages, 4MATIC and Sport Package applications, MOExtended combinations, alternator and battery specifications, spark-plug data for gasoline models, vehicle dimensions, load limits, and fluid capacities. These are operating and identification specifications; they are not a substitute for component-level repair data.

The battery section warns that detaching terminals with the engine running can severely damage the alternator and other electronics, while reversed connections can also damage electrical components; it also identifies the systems that require resynchronization after power is restored. The wiper-blade section warns that allowing the tensioned arm to snap back can crack the windshield.

Scope and Safety

This publication is an Operator's Manual, not a workshop repair manual. It does not contain internal engine or transmission teardown, factory diagnostic test plans, full electrical wiring diagrams, full workshop torque tables, or component overhaul instructions. The scheduled maintenance tasks and service record belong to the separate Maintenance Booklet, while COMAND operation may require its own separate instructions.

Follow the manual's system-specific warnings when working around the electrohydraulic brakes, batteries, a raised vehicle, or high-voltage Bi-Xenon lighting. Mercedes-Benz directs brake-system service, SRS work, and Bi-Xenon lamp repair to qualified technicians.