2006 SAME EXPLORER II Special 70, 75, 80, 85, 90, 95 HP Tractor Workshop Manual OEM

• Original OEM 458-page workshop manual issued in 2006
• Covers the SAME EXPLORER II Special series: 70, 75, 80, 85, 90, and 95 HP tractors (2WD and 4WD chassis)
• Contains 47 detailed exploded-view schematics for drivetrain, steering, and braking assemblies
• Documents mechanical, hydraulic, and electrical system specifications exclusive to this build

Component and System Documentation

This factory manual provides the foundational reference data needed for complex diagnostics in the shop. It breaks down the transmission gearbox and shuttle units, detailing both the synchronized 4-speed and 5-speed configurations. Mechanics will find precise specifications for the underdrive, range selector assemblies, differential lock, front axle final drive, and PTO control systems. Dedicated chapters map out the hydraulic circuit architecture for steering and auxiliary lift controls, logging component designations and pressure settings for various global models.

Technical Data Preview

A quick look at the baseline specifications highlights a 50-degree steering angle and a maximum operating pressure of 155 bar for the steering circuit gear pump. The publication catalogs the lift control valve components, including rate-of-drop and pilot-enabling valve assemblies. Hydraulic trailer braking valves are rated at a maximum pressure of 250 bar, while the lift circuit pump displacement is 22.5 cc/rev at 190 bar. When evaluating these figures or performing high-pressure hydraulic tests, always verify against the complete factory documentation and ensure proper safety protocols are active in the workspace.