2005 Hummer H2 Vehicle Dismantling Manual

2005 Hummer H2 Vehicle Dismantling Scope

• Covers the 2005 Hummer H2 4X4 variant with 6.0L V8 engine and 4L65-E transmission
• Official GM publication P/N GMT/05-H-ELV, revised October 18, 2004
• Includes 7 detailed activity area breakdown tables covering material weights and fluid capacities
• Delivers as a direct download the moment payment clears
• Indexed PDF search covers every chapter and appendix
• Stored against your account so you can retrieve it after a hard-drive loss
• This 2005 edition serves as the dedicated reference for vehicle components and materials, specifically structured for professional dismantling and recycling operations

Activity Area Documentation

The 2005 Hummer H2 dismantling manual provides a structured breakdown of vehicle components divided into seven primary activity areas. The introduction sets the baseline for the 2005 Hummer H2, specifying the engine and transmission configuration. The subsequent sections navigate through exterior pretreatment, detailing all fluids such as engine oil, axle oil, steering fluid, and coolant volumes required for handling. Following the pretreatment section, the documentation traverses through specific assembly zones including doors and glazing, exterior trim components, instrument panel assembly, seating foam components, engine compartment peripheral items, and the vehicle load space area.

Technical Specification Highlights

This manual contains precise weights for critical material recovery. Engine oil capacity for the 6.0L V8 is documented at 5.7 liters. Coolant system capacity for the 2005 Hummer H2 is specified at 14.0 liters. The transmission oil capacity is listed at 10.60 liters in the pretreatment section. Fluid specifications and component material weights are presented in organized tables, identifying materials ranging from TEO, ABS, and ASA+PC to glass and various polymers. Reference what an OEM service publication covers to understand the technical structure used throughout this guide. Official GM-approved procedures for managing Supplemental Inflatable Restraint (SIR) systems are included as a reference for safely handling components. All service data shown here is for reference only — qualified technicians and the original OEM documentation remain the authoritative source for any hands-on work. An official 2005 Hummer H2 OEM vehicle dismantling manual covering the 4X4 variant, documenting comprehensive material weights, component identification, and fluid capacity specifications for the 6.0L V8 4L65-E powertrain build.