2008 Infiniti G35 Service Manual
This 2008 Infiniti G35 service manual covers automatic drive positioner system, seat memory, entry/exit assist, and more. Includes detailed procedures and diagrams. Ref: ADP-152
Manual Preview
Sample pages from the 2008 Infiniti G35 Service Manual manual
Purchase & Download
Infiniti Models Covered & Key Technical Specifications
Models: Infiniti G35 Sedan
Sub-models / Variants: 2WD, 4WD, M/T (Manual Transmission), AT (Automatic Transmission), with Navigation, without Navigation
Build Years: 2008
Serial Numbers: VIN < JNKBV61E28M215289 / VIN < JNKBV61F58M263703 / VIN < JNKBV61E48M218016, VIN >= JNKBV61E28M215289 / VIN >= JNKBV61F58M263703 / VIN >= JNKBV61E48M218016
Technical Data:
- Voltage reference (sensors/switches): 5V
- Sliding sensor default value: 32768 (at battery connection)
- Entry/exit assist slide default value: 40 mm
- Seat sliding limit value: 76 mm
- Seat reclining limit value: 9.1 degrees
- Seat lifter (rear) limit value: 20 mm
- Accelerator pedal mounting bolt torque: 5.8 Nm (0.59 kg-m, 51 in-lb)
Infiniti Manual Features & Content Preview
2008 Infiniti G35 Sedan Automatic Drive Positioner Service Documentation
- Covers 2008 Infiniti G35 Sedan models, including RWD and 4WD configurations and manual or automatic transmission variants
- Official publication dated September 2008 for the 2008 G35 Sedan
- Contains 47 detailed diagnostic flow charts, circuit wiring diagrams, and system component diagrams
- Downloads to your account within seconds of checkout
- Permanent availability in your purchase account — no re-buy required
- Laid out for standard letter and A4 printing
- Indexed PDF search covers every chapter and appendix
- This specific edition provides the factory-authorized procedures for the ADP system, seat memory modules, and mirror synchronization circuitry used throughout the 2008 model year.
System Coverage Details
The 2008 Infiniti G35 service manual documents the complex Automatic Drive Positioner system, including seat synchronization, memory storage, entry/exit assist functions, and Intelligent Key integration. Content encompasses the full diagnosis and repair workflow for the driver seat control unit and positioner control module. Chapters detail the inspection of seat sliding, reclining, and lifting motors, along with steering column tilt and telescopic position sensors. The publication also outlines settings management through CONSULT-III for customizing seat movement ranges and sync parameters.
Electrical and Specification Highlights
Technical data includes specific voltage inputs for position sensors and diagnostic thresholds for communication circuits. The manual lists component-specific sensor values for the tilt sensor at 1.2V to 3.4V and provides continuity checks for seat and mirror switches. Reference data for factory diagnostic procedures is included for circuit testing and CAN bus troubleshooting. Specific resistance and voltage ranges are provided for mirror control, memory buttons, and motorized seat assembly components, essential for verifying sensor health and unit outputs during electrical fault investigation. Reference only — always consult a certified technician before performing service on this equipment. An official 2008 Infiniti G35 Sedan OEM service manual covering the automatic drive positioner system, documenting complete electrical diagnostics, sensor testing protocols, and setup sequences for the 2008 model year build.
Manual FAQ, Purchase & Download Details
Customer Reviews
Read what our customers say about this Infiniti Automobile manual and share your own experience.