2007 Toyota FJ Cruiser Automatic Transmission System Service Manual
Covers Toyota FJ Cruiser Automatic Transmission System with procedures for diagnosis, testing, and component replacement. Publication C4085-91017.
Manual Preview
Sample pages from the 2007 Toyota FJ Cruiser Automatic Transmission System Service Manual manual
Purchase & Download
Toyota Models Covered & Key Technical Specifications
Models: Toyota FJ Cruiser
Sub-models / Variants: Automatic Transmission System (A750E)
Build Years: 2007
Technical Data:
- Standard stall speed: 2,250 to 2,550 rpm
- Recommended ATF specification: Toyota Genuine ATF WS (ATF JWS3324 or NWS9638)
- D range time lag: Less than 1.2 seconds
- R range time lag: Less than 1.5 seconds
- Idling line pressure (D position): 356 to 426 kPa (52 to 62 psi)
- Stall test line pressure (D position): 1,367 to 1,477 kPa (198 to 214 psi)
- Shift solenoid valve resistance (S1, SL1, SL2): 5.0 to 5.6 ohms at 20°C (68°F)
Toyota Manual Features & Content Preview
Technical Scope and Automatic Transmission Data
- Covers 2007 Toyota FJ Cruiser automatic transmission system, focusing on the A750E transmission diagnostics and electrical control architecture
- Official Toyota publication, A750E Automatic Transmission diagnostic and repair section
- Contains 6 electrical wiring diagrams, 5 diagnostic flow charts, and 5 mechanical system test tables
- File delivered as a direct download the moment payment clears
- Indexed PDF search covers every chapter and appendix
- This 2007 manual is the definitive reference for the A750E transmission diagnostic parameters and factory electrical specifications required for shop-level testing
Component Diagnostics and Electrical Systems
This manual provides detailed diagnostics for the 2007 Toyota FJ Cruiser automatic transmission. The document covers system precautions for disconnecting the negative battery terminal and initializing transmission systems, alongside detailed procedures for stall speed and shift time lag testing. Chapters include extensive diagnostic trouble code (DTC) charts, terminal voltage specifications for the ECM, and detailed wiring diagrams to assist in electrical circuit verification.
Technical data is provided for the A750E transmission components. The stall speed standard value is documented at 2,250 to 2,550 rpm. Line pressure for the D position during the stall test is listed as 1,367 to 1,477 kPa (198 to 214 psi) in the pressure specification table. The resistance for shift solenoid valves is specified at 5.0 to 5.6 ohms at 20°C (68°F).
How factory workshop documentation is structured and technical preview
The documentation features a complete monitor drive pattern guide for ECT testing and standard values for ECM terminal voltage inspections. Transmission fluid temperature sensor resistance is specified as 79 to 156 k ohms at 20°C. Diagnostic notes include specific operational conditions for the intelligent tester, such as standard voltage for shift position switch signals. Reference only — always consult a certified technician before performing service on this equipment.
An official 2007 Toyota FJ Cruiser service manual covering the A750E automatic transmission, documenting diagnostic procedures, electrical specifications, and mechanical system testing for the transmission control system.
Document Reference: A750E Automatic Transmission system section
Manual FAQ, Purchase & Download Details
Customer Reviews
Read what our customers say about this Toyota SUV manual and share your own experience.