2008 Honda Civic SRS (Supplemental Restraint System) Service Manual
This manual details the SRS system for 2008 Honda Civic models, covering component locations and diagnostic procedures. PN 07ZA1-TB4011A. Contains essential troubleshooting data.
Manual Preview
Sample pages from the 2008 Honda Civic SRS (Supplemental Restraint System) Service Manual manual
Purchase & Download
Models Covered & Key Technical Specifications
2008 Honda Civic SRS (Supplemental Restraint System) Service Manual PDF | Comprehensive Archive. Complete Safety Technical Manual: Honda Civic repair manual: 2006-2009 edition SRS Service Manual
- Factory Enclosure Specs: 9.8 N.m (1.0 kgf.m, 7.2 lbf.ft) is calibrated to mounting bolts.
- Essential Addressable Resolution: For SRS unit, safing sensor, or all impact sensors, 1.0 kgf.m establishes new bolts.
- Key Clamp Forces: The SRS unit, front impact sensors, side impact sensors, and rear safing sensor are designed for secure installation.
- Primary Spacing Data: SRS unit connector B requires 2.0-3.0 ohms baseline.
- General Electrical Load: The SRS indicator shows 0.5 V is specified as power supply.
- Integral Footprint Data: SRS unit connector A defines 1 M ohms mapping.
Manual Description & Preview
Complete Safety Technical Manual: Honda Civic repair manual: 2006-2009 edition SRS Service Manual
| Model-Specs: Honda Civic DX / LX / EX / Si / Hybrid // Technical-Scope: SRS System Components / Diagnostics Logic // Model-Specs: Detailed Diagnostic & Repair Procedures. | Service-Nexus | Value | Context |
|---|---|---|---|
| SRS Unit Component Testing | 10 seconds | for SRS indicator reset time. | |
| Driver's Airbag Resistance | 1 ohm | or less for proper function. | |
| Front Passenger's Airbag Connector Resistance | 1 ohm | or less for proper function. | |
| SRS Simulator Lead Resistance | 1 M ohms | for open circuit detection. | |
| SRS Unit Connector B Resistance | 2.0-3.0 ohms | for seat belt tensioner continuity. | |
| SRS Simulator Voltage | 0.5 V | or less for proper power supply. |
Factory specifications are documented for SRS system operations. Engine rebuild procedures are documented for SRS component testing. Drivetrain specifications are addressed in SRS system diagnostics. Reassembly procedures are specified for SRS unit connections. Service intervals are documented for SRS component replacement. Approved procedures are documented for SRS system troubleshooting. Repair procedures are structured around diagnostic trouble codes (DTCs), component location indexes, and system diagrams. Thoroughly requiring adherence to safety precautions, the manual details diagnostic procedures for various DTCs, including open circuits, short circuits, and internal failures. The manual includes detailed diagrams of SRS components and wiring, offering a comprehensive guide for servicing the Supplemental Restraint System.
FAQ
Customer Reviews
Read what our customers say about this Honda Car manual and share your own experience.