HP LaserJet P2030/P2050 Series Service Manual, 2008 (P/N CE457-90980)
322 Pages • 1 Printable PDF (English) • Download
Hewlett Packard Models Covered & Key Technical Specifications
Models: LaserJet P2035, LaserJet P2035n, LaserJet P2055d, LaserJet P2055dn, LaserJet P2055x
Sub-models / Variants: P2030 series, P2035 (CE461A), P2035n (CE462A), P2050 series, P2055d (CE457A), P2055dn (CE459A), P2055x (CE460A)
Model Year: 2008
-
Processor: 600 MHz (P2050 series), 266 MHz (P2030 series)
-
Print Speed: 30 ppm to 35 ppm
-
Resolution: Up to 1200 dpi
-
Power Consumption: 570 W (P2050 series), 550 W (P2030 series), average while printing; preliminary figures
Hewlett Packard Manual Features & Selected Content Preview
This Hewlett-Packard service manual covers the 2008 HP LaserJet P2030 and P2050 series, including the P2035, P2035n, P2055d, P2055dn, and P2055x. P/N CE457-90980, first edition, October 2008.
Search, Bookmarks, and Diagram Readability
Finding service details: The service text is searchable, and embedded bookmarks link to chapters and subsections. The Chinese regulatory table is a graphic with a searchable heading. Rotate the circuit diagram and zoom in to read small pin numbers and signal labels.
The download is one printable English PDF with 322 pages. It includes 12 front-matter pages, 308 numbered pages covering the chapters, appendices, and index, and two closing pages: a blank page and the back cover.
Paper Feed, Fuser Service, and Fault Diagnosis
This selection of service topics covers common repair and diagnostic tasks. The manual also explains how to run a cleaning page and use the straight-through paper path.
- Paper-feed repair: Replace pickup rollers and separation pads, remove the registration assembly, reassemble the paper-pickup gears, and service the P2050 duplex mechanism.
- Internal assemblies: Remove and replace formatter PCAs, the engine controller unit, the laser/scanner assembly, the main motor, and the fuser.
- Print-quality diagnosis: Use the half self-test and drum-rotation check, measure heating-element and thermistor resistance, and inspect high-voltage contacts.
- Fault isolation: Interpret P2030 status-light patterns, P2050 control-panel messages, and event-log codes. Use engine test pages and model-specific service functions to narrow down faults.
- Electrical and parts references: Locate engine-controller connectors, follow circuit and timing diagrams, and identify replacement parts in exploded views and accompanying tables.
The manual is suited to printer service technicians familiar with HP LaserJet printing processes and component functions.
Engine Control and Image Formation
The theory chapter explains engine control, laser/scanner operation, image formation, and the low- and high-voltage power supplies. The timing chart shows when sensors, motors, and other components operate during printing.
The circuit diagram traces connections between the engine controller and formatter. The connector tables link disconnected sensors and assemblies to symptoms, including control-panel messages on P2050 printers.
Assembly Replacement and Post-Service Checks
Illustrated procedures include reassembly notes for the fuser-drive gears, engine-controller mounting bracket, and paper-pickup-gear assembly. The post-service test covers print quality, printing from a host computer, and duplex output on P2050 models.
The formatter and laser/scanner procedures warn that a partially seated flat-flex cable can short a circuit board. Before internal service, follow HP’s electrical isolation, fuser cooling, and laser safety precautions. Repair coverage ends at the field-replaceable unit level.
Print Defects, Paper Jams, and Service Tests
The half self-test helps distinguish image-formation and development faults from transfer or fusing problems before parts are replaced. Print-quality examples cover faded print, toner smears, and vertical lines.
Troubleshooting sections cover jam locations, paper-path sensors, and USB and network communication. P2050 service functions include continuous self-test, display and button tests, Ethernet reset, and NVRAM initialization. HP identifies settings that cannot be recovered after initialization.
Model Differences and Replacement Parts
Tray coverage distinguishes the standard 250-sheet Tray 2 from the 500-sheet Tray 3, supplied with the P2055x and available as an option for the P2050 series. The P2035n uses 10/100 networking. The P2055dn and P2055x support Gigabit networking.
For P2050 memory upgrades, the manual identifies compatible DDR2 modules for the single DIMM slot and explains how to verify installation. It warns that pressing the module straight down can damage the contact pins.
Seven exploded assembly views and their parts tables distinguish 110–127 V and 220–240 V fusers and engine controllers, as well as model-specific formatter boards. They also distinguish the P2030 face-down-drive assembly from the similar-looking P2050 duplexing paper-feed assembly, which uses different internal gears.
Sample Fuser Readings and Repeating-Mark Spacings
For the fuser heating-element check, HP specifies normal resistance of 25 Ω ±10 Ω for 110 V printers and 80 Ω ±20 Ω for 220 V printers.
The repetitive-defect table associates marks spaced 57 mm apart with the fuser film and marks spaced 75 mm apart with the photosensitive drum. Measuring the interval helps identify which component to inspect.
Customer Reviews
Read what our customers say about this Hewlett Packard Printer manual and share your own experience.