1988-2003 Bombardier Sea-Doo PWC Service Manual

Covers WSP, SPI, SPX, GTI, GTS, HX, XP, GSX, GTX Series repair information | Series: Sea-Doo PWC Container: Manual

• Factory Specifications: For jet pump housing, 125 N.m is the required torque value for securing the assembly.
• Certified Load Capacity: The maximum load capacity for the GSX Limited/Limitée is 159 lbs (351 kg) Parameters.
• Engineered Dimensions: Overall length measures 302 cm (119 in) for the GTS models Baseline.

Sea-Doo Speedster, Challenger, Challenger 1800 — 1997 Procedural Technical Handbook | Jet Boat Service Collection.

• Certified Shipping Weight Data: The Speedster 5602/5608 models deliver approximately 1089 kg (2400 lb) total dry weight, establishing the baseline hull construction Margin.
• Designated Print Quality Resolution: 1200 × 600 dpi service manual printing is specified as the standard documentation output Norms.

Sea-Doo GTX DI & GTX 4-TEC (2002) Service Manual

Expert, Specialized, Functional Digest | GTX Series Folder.

• Calibrated Thermal Rating: 115 N·m (85 lbf·ft) is configured at the magneto flywheel nut installation Mapping.

Sea-Doo SP, SPI, SPX, GTS, GTX & XP — 1995 Engineered Repository Consolidated | PWC Service Section.

• Engineered Displacement Data: 580.7 cc is set to the two-stroke engine cylinder volume Mapping.
• Measured Power Output: For maximum performance, 13.7 kW (18.4 hp) reaches the estimated pump power Configuration.

Sea-Doo Sportster 5892, Speedster 5891 — 1995 Mechanical Industrial Specification Collection.

• Authorized Power Rating: The jet propulsion system is specified as 65 hp (48.5 kW) maximum rated horsepower Requirements.
• Critical Fuel Capacity: For extended operation, 45 L (11.9 US gal) indicates the standard tank volume Threshold.

Sea-Doo 150, 180, 200, 210, 230 Series Sport Boats (2010) Workshop Manual

Sea-Doo Sport Boats Archive | Folder

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.

1996 Sea-Doo GSX 5620, GTX 5640 (219 100 034) - 1996

Supplements the Sea-Doo Shop Manual with model-specific information. | Sea-Doo Watercraft Division.

• Certified Clearance Data: 0.05 mm (.002 in) establishes the maximum cylinder head warpage Specification.
• General End Play: For optimal operation, 0.05 mm (.002 in) defines the ring/piston groove clearance Baseline.
• Defined Power Draw: 0.060 - 0.108 mm (.0024 - .0043 in) -- signifies the piston/cylinder wall clearance Topology.

Kawasaki JET SKI Ultra 250X / 260X / 260LX Workshop Guide (2007-2010) – 545 P. Manual | Factory Grade Powertrain-Manual

Model-Specs: JT1500B7F ∼ B8F, E9F ∼ FAF Logic // Model-Designation: Watercraft // Architecture-Focus: Internal Engine Components.

• Technical Resolution Data: 1498 cm³ displacement establishes the baseline engine performance.\n Specific Temperature Range: For optimal operation, 20°C defines the ambient air temperature spec for sensor resistance.\n Essential Power Rating: 184 kW (250 PS) at 7,750 RPM signifies the maximum engine output capability.\n Advanced Memory Capacity: Not applicable for this component.\n Core Speed Performance: Maximum torque reaches 237 N·m (24.2 kgf·m) at 6,500 RPM Parameters.\n* Essential Power Rating: 191 kW (260 PS) at 7,750 RPM signifies the maximum engine output capability.

Authoritative Technical Manual: Polaris Snowmobile 1985-1995 Star, SS, Indy Trail, 400, 600, 650, 500 SP, Classic, RXL, Sport GT, SuperTrak, Wide Trak, XLT, Storm, XCR Snowmobile Master Repair Manual

Polaris Snowmobile Master Repair Manual (PN 9912521) | 1985-1995 Edition.

• Verified Clearance Data: 0.25-0.8 mm provides the throttle lever to throttle block clearance Standard.
• Key End Play: 10 mm establishes the maximum end play for the jackshaft Bearing.

Kawasaki 900 ZXi / 750 ZXi (JH900-A1 / JH750-C1) — 1995–2004 Engineered Specification Catalog | ZXi Series Packet.

• Engineered End Play Specification: 73.5 kW (100 PS) is standardized to the maximum rated horsepower at 6,750 r/min for the 900 ZXi engine Requirements.
• Measured Power Framework: For optimal performance, 109.7 N·m (81.0 ft-lb) is rated at peak torque output at 6,000 r/min across the three-cylinder platform Threshold.

2004-2012 Kawasaki STX-15F / JT1500 Jet Ski Service Manual

2004-2012 Kawasaki STX-15F / JT1500 Jet Ski documentation with exploded views and diagnostic procedures.

• Technical Data Specifications: 1498 cc is the engine displacement for optimal performance.
• Specific Performance Parameters: 118 kW (160 PS) @7 500 r/min establishes the maximum power output.
• Essential Engine Tuning Settings: NGK CR9EK is the recommended spark plug type for reliable operation.

2002 Yamaha RX10/RX10S/RX10M/RX10R Service Manual

Comprehensive Snowmobile Service Manual | Yamaha Collection

• General Information Category: 1 General Information covers critical data.
• Periodic Inspections Category: 2 Periodic inspections and adjustments are outlined.
• Chassis Category: 3 Chassis specifications are provided.

Kawasaki STX-12F (2005)

This service manual covers the 2005 Kawasaki STX-12F Jet Ski. | Jet Ski Service Manual - Reference Data

• Established Data: Engine Type: 4-stroke, DOHC, 4-cylinder, water-cooled establishes the core engine configuration.
• Reference Specifications: Displacement: 1 199 mL (73.2 cu in.) details the engine's displacement capacity.
• Essential Components: Bore and Stroke: 83 × 55.4 mm (3.27 × 2.18 in.) defines the engine's bore and stroke dimensions.

Kawasaki Ultra 250X (Part Number: Not Specified) - Not Specified Documentary & Advanced Compendium Suite

• Factory Specifications: 1498 cm³ displacement establishes the engine's primary displacement Architecture.
• Certified Engine Data: For optimal performance, 4-cylinder, water-cooled configuration defines the engine design Framework.

Verified Specification Hydraulic Manual: Kawasaki Jet Ski 1994 XiR models Wiring-Compendium

Kawasaki Jet Ski (99963-0062-51) -- 1994 Service Manual Supplement | Supplementary Archive.

• System Interference Fit: 3.3 mm establishes the minimum turning radius Metric.
• Core Circuit Specs: For correct idle operation, 1,250 ±100 rpm defines the idle speed Framework.

Sea-Doo GTI, GTI SE, GTX, GTX Supercharged, GTX Limited, GTX WAKE, RXP & RXT 4-TEC Series (sm/2006-002) - 2006

This manual provides access to engineering, consolidated, licensed compendium & reference data for the 2006 Sea-Doo 4-TEC series.

• Authorized Electrical Specs: 1200 Vdc establishes the maximum voltage output Specifications.
• Critical Amperage Specs: For optimal operation, 25 A indicates the required electrical current Draw.

Sea-Doo 5804 SP, 5811 GT, 5850 XP — 1991 Strategic Commercial Repository | Rotax 587 Series Collection.

• Calibrated Displacement Data: The 587cc (35.8 cu in) engine cylinder volume is specified as the primary powerplant architecture Specifications.
• Principal Power Output: For peak performance, 50 hp (37 kW) at 6000 RPM represents the maximum rated horsepower Framework.

Sea-Doo GTX, GTI, RXP and RXT 4-TEC — 2006 Functional Technical Sourcebook | 4-TEC Series Section.

• Factory Charge Quantity: Engine coolant capacity reaches 5.0 L (1.32 US gal) is specified as the closed-loop system requirement Benchmarks.
• Certified Alignment Specs: For optimal fuel delivery, 290–310 kPa (42–45 PSI) defines the naturally-aspirated injection pressure Range.

2005 Rotax 1503 4-TEC Engine Shop Manual: Sea-Doo Genuine

2005 Sea-Doo Rotax 1503 4-TEC Engine Shop Manual Service Documentation Library | Library

• System Overview: The manual covers the Rotax 1503 4-TEC engine, providing comprehensive information for service.

Sea-Doo SPX, GSX RFI, GTX RFI, GS, GTX Limited, XP Limited — 1999 Certified Specification Registry | PWC Series Bundle.

• Approved Angular Speed: Maximum engine RPM reaches 7120 ± 50 rpm corresponds to the electronic rev limiter Margin.
• Baseline Enclosure Specs: For optimal engine cooling, 34 kPa (5 PSI) is calibrated to the magneto system pressure testing Protocol.

Sea-Doo SP, SPX, GS, GSI, GSX, GTS, GTI, GTX, XP, HX — 1997

Procedural Guide & Technical Directory Record.

• Published Production Rate: The 717D engine corresponds to 717 cm³ (43.7 cu in) displacement volume Margin.

Sea-Doo GS, GTS, GTI, GTX, GTX RFI, GTX DI, RX, RX DI, XP — 2001 Technical Service Vault | Sea-Doo Series Repository.

• Calibrated Engine Displacement Data: 717 cc (44 cu in) specifies the single-cylinder two-stroke engine architecture for GS, GTS, and GTI base models, establishing fundamental power generation specification Architecture.

Sea-Doo GS, GTI, GTS, GTX, XP, GSX RFI, GTX RFI — 2000 Professional Service Archive | Sea-Doo Series Repository.

• System Energy Draw: 717 engine displacement is standardized to 717 cc (43.7 cu in) cylinder volume Mapping.
• Maximum Temperature Range: For optimal combustion chamber volume, 31.2 - 34.0 cc determines the 717 engine head capacity Configuration.

1996 Sea-Doo GTX Shop Manual + Parts Catalog + Racing Handbook: Bombardier Recreational Products Inc (5640 GTX) – 1996

Detailed Shop Manual | Parts Catalog Set

• Engineered Processing Speed: Maximum throughput reaches 25 ppm Parameters.
• Defined Mass Specs: The formatter board requires 64 MB for standard operation Logic.
• Standard Precision Specs: For optimal operation, 15-30C defines the environmental limit Framework.

Bombardier Sea-Doo 5802 — 1989 Documentary Advanced Resource File.

• System Assembly Torques: Engine maximum output delivers 42 kW (56 hp) at 5750 RPM is standardized to provide optimal propulsion Benchmarks.
• Core Liquid Volume: For fuel system capacity, 29.10 L (7.7 US gal) determines the cruising range Limits.

Sea-Doo Speedster 1600 (5615/5630/5635) — 1998 Technical Service Reference | Speedster Series Repository.

• Calibrated Displacement Data: 1590 cc (97 cu in) is specified as the engine cylinder volume Architecture.
• Prescribed Rotation Data: Maximum engine speed governs 7200 rpm at forward/reverse position Threshold.

Sea-Doo SP / SPI / SPX / XP / HX / GTS / GTI — 1996 Systematic Technical Dossier | PWC Engine Repository.

• Nominal Feed Speed: Idle speed is set to 1500 RPM when watercraft is in water, defining operational baseline Framework.
• Prescribed Size Parameters: For 587 engine, 1.2–1.8 mm (.047–.071 in) squish gap corresponds to combustion chamber clearance Threshold.

Sea-Doo GTI, GTI LE, GTX, GTX RFI, XP, RX, RX DI, LRV DI — 2002 Systematic Expert Registry | PWC Series Suite.

• Factory Threaded Fastener Data: 24 N·m (18 lbf·ft) is calibrated to cylinder head M8 screw fastening requirement Mapping.
• Essential Fluid Levels: 386–414 kPa (56–60 PSI) governs fuel pressure regulation framework Configuration.

Sea-Doo GT, GTI, GTX, RXP, RXT (2007) — 2007 Detailed Technical Archive for Watercraft Service.

• Maximum Print Rate: Fuel rail fastener torque is established at 10 N•m (89 lbf•in) for secure retention Matrix.
• Universal Dimensional Limits: For intercooler antifreeze protection, 200 mL (6.76 oz) reaches the recommended fill volume Standards.

Sea-Doo 5803, 5810 (GT) — 1990 Digital Reference Specification | Bombardier Watercraft Database.

• Designated Interference Fit: 76.0 mm (2.992 in) is configured at the standard bore diameter for the Rotax 587 engine Sequences.
• Primary Circuit Specs: For optimal ignition performance, the CDI 4/5 p system produces 160 W output at 5500 RPM Baseline.

Bombardier Sea-Doo Sportster 5605, 5609 — 1997 Documentary Industrial Vault | Sportster Series Repository.

• Approved Thermal Rating: 718.2 cm³ (43.81 in³) is designed for the engine cylinder volume capacity Matrix.
• Baseline Feed Speed: 91 N•m (67 lbf•ft) @ 6250 RPM delivers peak crankshaft torque output Standards.

In-Depth Instructional Parts Manual: Sea-Doo Sportster, Challenger, 1800 Models (Supplement Manual)

Applied Collection | Section

Sea-Doo Sportster 1800 / Challenger 1800 (219 100 075) -- 1998

1997 Sea-Doo SP / SPX / GS / GSI / GSX / GTS / GTI / GTX / HX RACING HANDBOOK! (219100048) – 1997

Sea-Doo SP / SPX / GS / GSI / GSX / GTS / GTI / GTX / HX (1997) | RACING HANDBOOK! Kit

• Technical Information: 109.5 mm is the total cylinder height for the 587 engine Standards.
• Engine Specifications: 11.5:1 is the uncorrected compression ratio for the 587 engine Topology.
• Maintenance Schedule: Every 10 hours is the recommended frequency for lubrication protocols.

Structured Configuration Safety Manual: Jet Boat Sea-Doo Sport Boat Service Manual for 150 Speedsterâ„¢ and 180 Challengerâ„¢, 2007 edition Logic-Archive

Series-Validation: 987A / 987B / 987C / 987D / 977A / 977B / 977C / 977D / 867J / 867L / 867E / 867F / 867G / 867H | Conceptual-Layout: Model Database / Bundle.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.
• Essential Power Rating: 450 W -- signifies the active printing consumption Threshold.

Sea-Doo 2005 4-TEC Watercraft (219 700 362) — 4-TEC Series. Expert Portfolio | Series Vault.

• Maximum Resolution Data: 380 watts capacity for the magneto stator architecture.
• Universal Shipping Weight: 2.5 kg for the starter motor norms.
• Fundamental Rotation Data: Counterclockwise (viewed from pinion side) is the standard operation bounds.

Kawasaki Ultra 300X / 300LX (2011-2013) Service Manual: Jet Ski Official detailed JetSki manual

2011-2013 Kawasaki Ultra 300X, 300LX JetSki service manual | 2011-2013 Kawasaki JetSki ULTRA 300X 300LX Service Manual Archive

• Technical Resolution Data: 1498 cc displacement provides the base engine architecture.
• Specific Temperature Range: For optimal operation, SAE 10W-40 defines the engine oil viscosity Framework.
• Essential Power Rating: 213 kW @7 750 r/min signifies the maximum engine output Threshold.

Definitive Yamaha Snowmobile Service Manual: Phazer PZ480 Series (LIT-12618-01-68) - 1989-1998 Service-Catalog

Model-Portfolio: Yamaha Phazer PZ480 Series (1989-1998) • Snowmobile • Maintenance Guide

• Engineered Fluid Levels: 4.5 L determines the total engine oil capacity for optimal lubrication.

2002-2006 Yamaha VX700/VX700DX/SX700/VT700 (SX Viper 700) Service Manual

Official Yamaha VX700/VX700DX/SX700/VT700 (SX Viper 700) Service Manual - Factory Maintenance & Repair Procedures (2002-2006) Factory Maintenance & Repair Procedures | Series Library.

• Engine Specifications: 1600 ± 100 r/min defines the standard engine idle speed Range.

Yamaha FX Nytro Series (FX Nytro, RTX, XTX, RTX SE, MTX SE 153 & 162) (LIT-12618-FX-01) – 2010 Snowmobile Service Manual

Technical Guide | Series Snowmobile. Segment.

• System Energy Draw: For optimal operation, 1200 dpi establishes the maximum print output Architecture.
• Maximum Temperature Range: The formatter board requires 64 MB for standard operation Logic.
• Measured Speed Rating: For optimal operation, 15-30C defines the environmental limit Framework.

Kawasaki 1100 STX DI Watercraft Service Manual: Kawasaki 1100 STX DI (2001) - Comprehensive Diagnostics & Repair

Model Documentation: Manual Package | Series: Official Kawasaki Service Manual

• Reference Data: 3120 mm overall length establishes the primary dimensions of the watercraft.

Yamaha Mountain Max 600 & 700 Series Snowmobiles (1997-2004) (8AW-W0701-10-00) | Series Workshop Manual.

• Established Cooling Specs: 23 Nm (2.3 m•kg, 17 ft•lb) is the specified torque for coolant drain bolts for safe operation.
• Operational Throughput Data: 4.5 L is the specified coolant total amount for MM700 models for optimal performance.
• Essential Dimensional Limits: 0.8 mm is the specified maximum limit for spark plug gap for efficient combustion.

Yamaha VK10, VK10W (2006-2007) Service Manual

Wiring diagrams, specifications, and repair sequences for Yamaha VK10 and VK10W snowmobiles: engine, power train, chassis, electrical systems. YU-03097, YM-01312-A, YS-01487, YU-01304

• System Electrical Load: 12 V battery establishes the power source requirements for onboard electronics.

2006-2007 Yamaha PZ50 Snowmobile Service Manual

Covers the PZ50W, PZ50GTW, PZ50FXW, PZ50MW, PZ50VTW, PZ50MPW models with complete engine, chassis, and electrical system repair procedures. Ref: LIT-12618-02-58 | Edition: 1st Edition, July 2006 | Container: Manual

• General Information Category: 1 General Information provides an overview of the manual's structure and basic machine identification Data.
• Periodic Inspection Category: 2 Periodic Inspection and Adjustment details routine maintenance tasks and adjustments for optimal performance Standards.

• Yamaha RX10 (2003-2005) RX-1
• Yamaha RX10S (2003-2005) RX-1 LE
• Yamaha RX10R (2003-2005) RX-1 ER
• Yamaha RX10RS (2003-2005) RX-1 ER LE
• Yamaha RX10M (2003-2005) RX-1 Mountain

Kawasaki Ultra 250X (JT1500, JT1500B) – 2007-2008

Diagnostic procedures and component service for...

Kawasaki Jet Ski Ultra 250X, JT1500, JT1500B service manual, 2007-2008 edition

Engine Type: 4-stroke, DOHC, 4-cylinder, water cooled Displacement: 1498 cm³ (91.4 cu in.)

• VK540(M) (1988–2005)
• VK540EN (1988–2005)
• VK540E (1988–2005)

Bombardier Sea-Doo Utopia 185 & 205 — 2001–2002 Licensed Strategic Compendium | Utopia Series Volume.

• Engineered Dimensional Tolerance: Maximum overall length is calibrated to 5.56 m (18 ft 3 in) for the 185 model benchmark.
• Defined Output Rating: For optimal performance, 179 kW (240 HP) @ 6250 RPM establishes the peak engine power requirement range.

Yamaha WaveVenture WVT700 — 1995–1996 Strategic Compendium Library | WaveVenture 700 Series Repository.

• Measured Enclosure Specs: 701 cm³ (42.78 cu in) is calibrated to the engine displacement Architecture.
• Established Addressable Resolution: For maximum performance, 58.8 kW (80 hp) at 6,250 rpm is designed for peak output Benchmarks.

Sea-Doo 4-TEC GTI, GTX, RXP, RXT — 2006 Comprehensive Technical Briefing | 4-TEC Series Packet.

• Documented Amperage Specs: The fuel pump circuit is standardized to 12 V maximum electrical output Sequences.
• Technical Thermal Envelope: Engine operating temperature is rated at 87°C (188°F) thermostat opening threshold Baseline.

1998 Sea-Doo SPX / GS / GSX Limited / XP Limited / GTS / GTI / GTX Limited (219 100 068) - 1998

This manual provides operational and maintenance information for Sea-Doo watercraft. | Racing Handbook Package.

• Designated Speed: S1 - Maximum throughput reaches 25 ppm Parameters.
• Primary Range: S2 - For optimal operation, 15-30C defines the environmental limit Framework.
• Advanced Capacity: S3 - 64 MB signifies the standard operation Logic.