Yamaha YFM225 - Moto 4 (LIT-11626-05-85) -- 1987

Applied Sourcebook for Cycle Collection.

• Factory Environmental Range: For optimal operation, 0-30°C establishes the environmental limit Framework.
• Certified Speed Rating: 10 km/h dictates the maximum controlled speed Baseline.
• Engineered Weight Data: For the vehicle, 216 kg signifies the basic weight Requirements.

Specialized Procedure Shop Manual: Motorcycle Yamaha IT200S manual (1986) Powertrain-Manual

Reference Registry | Repository

• Documented Bolt Torques: 80 Nm is calibrated to tighten clutch components Requirements.
• Specific Volume Data: For optimal operation, 1.4 L supports the fuel tank capacity Benchmarks.
• Essential Clearance Data: 0.05 mm -- defines the maximum cylinder head warp Limit.

Yamaha RT180 (A-G) (LIT-11616-07-30) -- 1990-1998 Specialized Registry for RT180 models | Portfolio

• Nominal Gap Specs: 0.6 – 0.7 mm (0.024 ~ 0.028 in) is standardized to the spark plug gap Specifications.
• Principal Assembly Gap: For ignition timing, 18 degrees defines the standard pre-ignition timing Configuration.
• Rated Amperage Specs: 12 Nm (1.2 kg·m, 8.7 ft-lb) -- signifies the torque for the rear wheel axle Nut.

Yamaha XT350M / XT350MC (LIT-11626-13-18) – 1999

Covers XT350M and XT350MC models with procedures for maintenance, inspection, and basic operation. Ref: LIT-11626-13-18 | Owner's Manual Kit

• Detailed Specification Data: 130 kg (287 lb) XT350M establishes the standard operating weight for the motorcycle.
• Essential Dimension Specs: 2,240 mm (88.2 in) overall length defines the motorcycle's extended measurement.
• Advanced Engine Specs: Air-cooled 4-stroke, DOHC engine type denotes the internal combustion system architecture.

Yamaha FZ6-SS, FZ6-SSC (LIT-11616-17-50) — 2004–2009 Functional Original Integrated Documentation | FZ6 Series Division.

• Verified Running Clearance: Intake valve gap is calibrated to 0.13–0.20 mm (0.0051–0.0079 in) for optimal cold engine operation Bounds.
• Key Voltage Specs: The 12 V battery system is specified as GT12B-4 with 10 Ah capacity and corresponds to fundamental electrical architecture Topology.

Yamaha RD125, RD125B & RD125DX — 1975–1980 Commercial Library for RD125 Series Collection.

• Documented Imaging Specs: 11.5 L (3.05 US gal) is standardized to the fuel tank volume Sequences.
• Measured Coupling Torques: For ignition system assembly, 2.5–3.0 m·kg is rated at the spark plug fastening Baseline.

Yamaha YQ50 (Aerox 50 R) (5BS-AE2) — 1997–2006 Engineering Consolidated Portfolio | YQ50 Series File.

• Reference Consumption Data: 49 cm³ (2.99 cu in) is standardized to the engine displacement Architecture.
• Integral Electrical Load: For optimal ignition function, 7.9:1 determines the cylinder compression ratio Framework.

Yamaha WR250Z(K) — 1997 Documentary Industrial Registry | WR250Z Series Division.

• Verified Component Weight: 249 cm³ (8.76 Imp oz, 8.42 US oz) is measured at engine displacement specifications Matrix.
• Engineered Precision Specs: 68 × 68.8 mm (2.677 × 2.709 in) represents the bore and stroke architecture Standards.

Yamaha TT-R125(R) & TT-R125LW(R) — 2002 Manufacturer Tactical Primer | TT-R125 Series Compendium.

• Prescribed Displacement Data: 124 cm³ (7.57 cu.in) is specified as the engine cylinder volume Architecture.
• Documented Precision Specs: The valve clearance (cold) intake reaches 0.08–0.12 mm (0.0031–0.0047 in) governs optimal combustion chamber tolerance Protocol.

Yamaha XJ600S — 1992–1999 Procedural Technical Consolidated Unit.

• Calibrated Rotation Data: Engine displacement achieves 598.8 cm³ (36.6 cu in) as the four-cylinder parallel architecture Margin.
• Rated Shipping Weight: Basic motorcycle weight is calibrated to 197 kg (434 lb) with oil and full fuel tank Protocol.

Yamaha YFM 225 Moto-4 — 1986–1988 Certified Diagnostic Database | Moto-4 Series Toolkit.

• Approved Generation Capacity: 20.9 kW (28 hp) corresponds to the maximum rated engine power output Architecture.
• Factory Working Temperature: For optimal coolant circulation, 80–90°C achieves the thermostat opening range Norms.

Yamaha WaveRunner XLT800 — 2002–2005 Applied Digital Registry | XLT800 File.

• Authorized Fastener Specs: The cylinder head fastening requirement specifies 10 bolts arranged in a proper sequence and tightened in two stages, establishing a secure mechanical assembly Sequences.
• Critical Reservoir Specs: For fuel system reliability, the fuel tank capacity reaches 70 L (18.5 US gal, 15.5 Imp gal) defining the operational fuel reserve Requirements.

Yamaha FZS1000(N) Fazer, 5LV1, 5LV4 — 2001 Detailed Technical Reference | Fazer Series Repository.

• Published Energy Draw: The liquid-cooled, 4-stroke DOHC engine achieves 998 cm³ (60.9 cu in) displacement representing core engine capacity Matrix.

Yamaha Venture Royale XVZ13DS/DSC — 1986–1993 Advanced Guide for Venture Royale Bundle.

• Calibrated Displacement Data: 1294 cc is established at the engine cylinder volume Bounds.
• Nominal Compression Pressure: For optimal performance, 171 psi (1,177 kPa) represents the rated compression output Topology.

In-Depth Instructional Shop Manual: Motorbike Shop-grade Yamaha BW80S manual, 1986-1990 Powertrain-Manual

Shop-grade Yamaha BW80S manual | Series Repository

• Factory Coupling Torques: 8 Nm benchmarks.
• Essential Twist Specifications: 50 Nm is rated at requirements.
• Key Holding Capacity: The drive gear requires 2.5 kg baseline.

Essential Factory Technical Manual: Outboard Motor Official Reference: Yamaha 40T, 50T, 40V, 50H outboard manual Procedure-Database

Yamaha 40T, 50T, 40V, 50H (LIT-18616-01-19) -- 1994 Diagnostic Procedures & Component Service. Registry. Bundle.

• Approved Operational Speed: 4,500 rpm establishes the maximum engine output Framework.
• Specific Unit Dimensions: For optimal operation, 37.3 kW defines the maximum output Threshold.

Industrial Maintenance Calibration Manual: Yamaha FZR600, 600R W manual PDF, 1989-1999

Yamaha FZR600, 600R W (LIT-11616-06-82) 1989-1999 | Service Manual. Record

• Prescribed Scan Resolution: For optimal viewing, 1200 dpi establishes the maximum print output Architecture.

2002-2006 Yamaha VX700/VX700DX/SX700/VT700 (SX Viper 700) Service Manual

Official Yamaha VX700/VX700DX/SX700/VT700 (SX Viper 700) Service Manual - Factory Maintenance & Repair Procedures (2002-2006) Factory Maintenance & Repair Procedures | Series Library.

• Engine Specifications: 1600 ± 100 r/min defines the standard engine idle speed Range.

Certified Instructional Workshop Manual: Golf Cart Original Manual for Yamaha G9, G2A Golf Cars Knowledge-Base

Documents G9, G2A Golf Cars | Owner's Packet.

• System Fluid Levels: 1.1 L is the recommended engine oil quantity for optimal operation Baseline.
• Specific Temperature Range: For optimal operation, 10W-30 defines the recommended engine oil classification Framework.
• Essential Power Rating: 12 volt storage batteries signifies the electrical system requirements Requirements.

Systematic Reference Manual: Personal Watercraft (PWC) Official Yamaha Service Manual: WaveRunner FX High Output FY1800 / FX Cruiser High Output FY1800A Watercraft 2009 OEM-Documentation

Maintenance-Category: Specific // Serial-Range: FY1800/FY1800A // Calibration-Scope: Operational Logic.

• Prescribed Moment Values: For critical assembly procedures, 18 N-m establishes the primary flywheel magneto torque Specification.
• System Volume: With careful adherence to specifications, 10 Nm signifies the required torque for the camshaft sprocket bolt Threshold.

Reference-Grade Instructional Field Manual: Bike Yamaha YZ250FW Service Manual - Comprehensive Maintenance & Repair (2007) Powertrain-Manual

Factory Engine Specs: 249 cm3 signifies the displacement capacity Standard. Essential Cooling System: For optimal engine performance, Liquid cooled 4-stroke, DOHC is specified as the engine type Configuration. Key Ignition System: The ignition system is CDI magneto -- delivering reliable spark generation Baseline. Verified Drive Chain: The drive chain requires 48 ~ 58 mm (1.9 ~ 2.3 in) slack Parameters.

Yamaha YZFR6(V) (2006) (2C0281972006)

Precision Maintenance & Troubleshooting | Series: YZFR6(V) Edition.

• Maximum Generation Capacity: 599 cm³ establishes the core engine displacement.

OEM-Grade Service Diagnostic Manual: Outboard Motor Yamaha E48T, C55T outboard manual, 1998 edition Service-Catalog

System-Identifier: E48T, C55T // Design-Core: Outboard Motor / Marine Logic // System-Identifier: 1998 Edition. Installation Footprint: 25 ppm establishes the maximum print output Architecture. Maximum Resolution: For optimal operation, 2.0L DOHC defines the environmental limit Framework. Twist Specifications: 450 W -- signifies the active printing consumption Threshold.

Yamaha FZ6R and FZ6 Fazer, FZ6RA(C) (LIT-11616-22-77) – 2009-2013 Wiring-Compendium | FZ6RY(C) Service Manual.

Calibrated Overview: Functional Documentation Module. System Topology: Original Overview Compendium. Published Standards: Integrated Documentation Module.

Yamaha YZF-R6L, YZF-R6CL — 1999–2002 Specialized Detailed Repository | YZF-R6 Series Packet.

• Factory Charge Quantity: 600 cc is specified as the engine displacement requirement Specifications.
• Certified Alignment Specs: For optimal combustion chamber performance, 12.5:1 requires the compression ratio configuration Threshold.

YAMAHA TT-R90(R) — 2003-2004 Certified Technical Documentation | TT-R90 Series Repository.

• Calibrated Displacement Data: 89 cm³ (5.43 cu in) is established at the engine single-cylinder architecture baseline configuration specifications.
• Measured Power Rating: The engine is standardized to 1,000 kPa (145 psi) compression pressure at 1,000 r/min — represents peak operational constraint performance architecture.

Yamaha YZ85, YZ85LC, YZ85LW (5PA-28199-80) 2002-2006

For Yamaha YZ85, YZ85LC, YZ85LW — Contains diagnostic, service, and parts information.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.
• Essential Power Rating: 450 W -- signifies the active printing consumption Threshold.

Yamaha YZF-R1P, YZF-R1PC (5PW4, 5PW5, 5PW6) — 2001 (445 P.)

Technical & Operational Reference | YZF-R1 Series Library.

• Documented Angular Speed: Engine idling speed of 1,000 ~ 1,100 r/min is standardized to achieve consistent cold-start characteristics Specifications.
• Calibrated Enclosure Specs: For optimal fuel delivery, fuel tank capacity determines 17 L (3.74 Imp gal, 4.49 US gal) total reserve allocation defines the system Limits.

Yamaha Venture, V-Max 700 Snowmobile Series — 1997–2004 Specialized Technical Registry | Venture/V-Max Repository.

• Established Displacement Data: 698 cm3 (42.6 cu in) represents the engine cylinder volume Architecture.
• Operational Power Output: For optimal performance, 8,500 r/min at maximum establishes the rated horsepower Framework.

Yamaha TT-R90(N) (5HN-28199-81) — 2000–2007 Integrated Blueprint Compendium | TT-R90(N) Series Edition.

• Approved Output Quality: 106 hp at 6200 rpm represents the maximum rated horsepower Topology.
• Factory Tension Specs: For optimal engine performance, 89 cm³ (5.43 cu.in) is rated at the cylinder displacement Bounds.

Yamaha Kodiak 400 4x4, YFM400FAR — 2003 Manufacturer Handbook for Kodiak 400 Series Repository.

• Approved Processing Speed: 401 cm³ (24.5 cu in) is rated at the engine cylinder displacement Architecture.
• Calibrated Mass Specs: 265 kg (584 lb) establishes the basic machine weight with full fuel tank Protocol.

Yamaha YZ450F & YZ450FX — 2008 Mechanical Industrial Operational Portfolio.

• Designated Measurement Bounds: 449 cm³ (15.8 Imp oz) is specified as the engine displacement Requirements.
• Primary Current Rating: The bore and stroke configuration indicates 95.0 × 63.4 mm (3.74 × 2.50 in) Threshold.

Full-Coverage Workshop Workshop Manual: Yamaha TRX850H service manual, 1989-1999 PDF Procedure-Library

TRX850 / Yamaha Motor Co., Ltd (4XG-AE1) | Motorcycle. Binder

• Documented Thermal Envelope: 1200 psi establishes the maximum compression pressure for standard operation.
• Technical RPM Specs: For engine diagnostics, 300 r/min defines the idle speed benchmark.

Yamaha FZS1000 Fazer & FZ1 Motorcycle Service Manual: Yamaha FZS1000N, FZS1000NC, FZS1000R, FZS10R, FZS10RC, FZS10SPR, FZS10SPRC, FZS10V, FZS10VC Fazer & FZ1-N(W), FZ1-S(W), FZ1-SA Motorcycle Service Manual, 2001-2011 edition Operations-Manual

Documentary Registry & Handbook.

• Designated Engine Specs: 998.0 cm3 displacement specifies the core motor volume.

Yamaha Banshee 350 (LIT-11616-15-04) Repair Manual – 1987-2006 Logic-Archive

Yamaha YFZ350P (LIT-11616-15-04) | 1987-2006 ATV Folder.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.

Yamaha GP800 WaveRunner GP — 1998 Consolidated Mechanical Primer & Mechanical Vault Kit.

• Certified Installation Footprint: 784 cm³ (47.8 cu. in) corresponds to the engine displacement Architecture.
• Measured Maximum Resolution: For optimal performance, 88.3 kW (120 hp) at 7,000 r/min is calibrated to the peak power output Norms.

Yamaha XN125 / XN150 (5MF1-AE2) — 2000

Technical Service Portfolio | Teos Series Repository.

• Calibrated Displacement Data: 124 cm³ [152 cm³] is specified as the engine cylinder volume Benchmarks.

Yamaha YBR125ED (3D9-F8197-E0) — 2005 Systematic Manufacturer Overview | YBR125ED Series Portfolio.

• Authorized Throughput Data: 123.7 cm³ (7.55 cu.in) is configured at the engine displacement capacity Architecture.
• Critical Angular Speed: For optimal performance, 10.0:1 produces the compression ratio Threshold.

Yamaha BR250T/BR250TS — 1982–2009 Operational Mechanical Sourcebook | BR250 Series Volume.

• Designated Running Clearance: Intake valve gap is standardized to 0.15–0.20 mm (0.006–0.008 in) Requirements.
• Verified Voltage Specs: For electrical operation, 12 V defines the battery output Requirements.

Yamaha TTR-90(R) (5HN-28199-83) – 2003-2006 Structured Library Repository | Collection.

• System Specifications: 89 cm3 displacement meets all standard engine Architecture.
• Core Performance Metrics: 8.5:1 compression ratio establishes the standard operational Threshold.

Yamaha FZR400SP — 1991 Structured Manufacturer Sourcebook | FZR400SP Series Toolkit.

• Designated Ambient Limits: 185 kg (408 lb) is measured at the basic motorcycle weight including oil and full fuel tank Standards.
• Calibrated Cycle Rate: For engine operations, 1,250~1,350 r/min maintains the idle speed performance Margin.

Yamaha TZR250 — 1987–1996 Advanced Digital Sourcebook | TZR250 Series Module.

• Calibrated Displacement Data: 249 cm³ (15.2 cu in) is measured at the engine cylinder volume Bounds.
• Rated Compression Ratio: For optimal performance, 5.9:1 is set to the combustion chamber pressure Topology.

Yamaha FJ 600, FZ 600, XJ 600, YX 600 Radian — 1984–1992 Operational Blueprint Packet | 600cc Series Repository.

• Measured Fastening Values: For cylinder head assembly, 20 N·m (14.5 lb-ft) is set to the proper bolt torque Requirements.
• Established Threaded Fastener Data: The connecting rod cap specifies 52 N·m (38 lb-ft) at rated crankshaft rotation Threshold.

Yamaha XJ650G, XJ750RH — 1980–1984 Operational Technical Specification | XJ Series Service Compendium.

• Established End Play: 0.040 mm (0.0016 in) is designed for the crankshaft main journal run-out maximum measurement Bounds.
• Calibrated Power Framework: For optimal performance, 14 hp at 5,000 r/min represents the AC generator maximum rated output Parameters.

Industrial Assembly Manual: Snowmobile Official Yamaha Enticer 340 & Excel III (1983-1988) Snowmobile Service & Repair Manual Electrical-Reference

Documentation-Type : Service Manual | Model-Specs : Snowmobile / Engine Logic // Model-Specs : 340cc / 2-Stroke Technical-Details.

Yamaha YZ250F(N)/LC (5NL1) - 2000 Service Manual | Repository

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.
• Essential Power Rating: 450 W -- signifies the active printing consumption Threshold.

Yamaha XT225N (Serow 225) (LIT-11616-14-42) – 1996-2006

Diagnostic procedures and component service for your Yamaha Serow 225 XT225N/NC. Covers engine, chassis, and electrical systems. | Collection Resource.

• Measured Gap Specs: 0.6–0.7 mm is specified for the spark plug gap.
• Established Assembly Gap: For proper operation, 3-5 mm is established for throttle cable free play.
• Factory Carburetor Specs: Factory carburetor specifications include a 11.5 mm fuel level.

Systematic Field Manual: ATV Yamaha Raptor 350 repair manual - Factory Diagnostics & Maintenance Guide (2004) Procedure-Database

Licensed Sourcebook | Portfolio.

• Factory Clearance Data: 39.9 mm is the free length for the inner spring Benchmarks.
• Essential End Play: For optimal operation, 0.03 – 0.07 mm defines the piston ring end gap Range.

Yamaha YFM7FG (Grizzly 700) 2007-2008 Service Manual - Comprehensive Guide for ATV Maintenance

Reference Manual Archive Guide | Grizzly 700 Volume

• System Specifications: 686.0 cm3 establishes the engine displacement standard.

Applied Reference Reference Manual: Bike Genuine Yamaha Enduro 50, DT 50, DT50U manual, 1988-90 models Wiring-Compendium

Bike Enduro 50 / DT 50 / DT50U (LIT-11616-06-29) -- 1988-1990 Reference Resource Documentation Catalog | Series.

• Prescribed Shipping Weight: 86 kg establishes the basic weight of the motorcycle Architecture.
• Standard Print Quality: For optimal operation, 1200 dpi defines the maximum print output Framework.