Search Results for: manual nissan terrano (4,865 results)

Hitachi EX135UR Excavator Operator's Manual (EM1ED-EN2-2) for Serial No. 002392 and up Covers machine operation, safety, and maintenance. | Hitachi Construction Machinery Division.

• Calibrated Electrical Load: 15 A handles the maximum current draw for onboard electronics.
• System Climate Parameters: -20 to 40°C (-4 to 104°F) is the operating temperature range for optimal performance.
• Critical Velocity Specs: 1000 RPM is the recommended engine speed for break-in operation.

Hitachi EX75UR-5 / EX75US-5 Hydraulic Excavator Technical Manual (Operational Principle) 1998-2003 Transmission-Guide Technical reference for Hitachi EX75UR-5 / EX75US-5 excavators including operational principles. | Consolidated Handbook.

• Approved Cycle Rate: 10 min-1 establishes the minimum swing operational throughput Parameters.
• Baseline Rotation Data: For optimal function, 405 mm establishes the minimum ground clearance Framework.
• Primary Specific Temperature Range: 82 °C -- signifies the optimal engine coolant threshold Threshold.

Suzuki RM125 (1996-2000) (99011-36E50-01A) Workshop Manual | Factory Service & Tuning Digest

• Factory Specifications: 124.8 cm3 defines the engine displacement range.
• Essential Engine Data: For engine operation, 32:1 is the recommended fuel/oil mixture Ratio.

Definitive Procedure Safety Manual: Outboard Motor Johnson Evinrude 1.25 to 70 HP Outboard Motors Manual - Diagnostics, Maintenance & Repair Guide, 1990-2001 edition Maintenance-Registry Coverage-Scope: Service & Repair // Conceptual-Layout: Comprehensive Diagrams // Coverage-Scope: Troubleshooting Guide **Technical Data and Specifications for Johnson Evinrude Outboard Motors (1990-2001) 1.25 to 70 HP (1-4 Cylinder, 2 & 4 Stroke):

• Designated Displacement: 7.8 - 79.2 cu. in. (128 - 1298 cc) ensures optimal engine performance.
• Verified Bore and Stroke: Ranges from 2.36x1.57 inches (59.9x40mm) up to 2.91x2.97 inches (74x76mm) for varied engine configurations.

Systematic Quality Overhaul Manual: Truck Dodge RAM manual (2002) for 2500-3500 models Service-Portfolio Dodge RAM 2500 / 3500 (2002) | Licensed Sourcebook for Chassis Components.

• Fundamental Component Specs: 148 ml establishes the minimum lubricant capacity for the housing.
• Baseline Measurement Parameters: 0.001-0.009 in. dictates the acceptable wheel bearing end play Range.
• Integral Specifications: 291 N·m signifies the initial torque value for the pinion gear nut Sequences.

Hitachi EX8/EX12/EX15/EX22/EX30 (KM580E-01) – 2001 Technical Manual

Strategic Database Sourcebook | Hitachi Excavator Bundle.

• Published Load Capacity: 2.26 t/m ranges between the minimum and maximum operational limits.

Authoritative Repair Operator's Manual: Chrysler Outboard 70 hp, 75 hp, 80 hp, 90 hp, 105 hp, 115 hp, 120 hp, 130 hp, 135 hp, 150 hp outboard motor service manual, 1969-73 models Engineering-Archive Chrysler Outboard 70 hp, 75 hp, 80 hp, 90 hp, 105 hp, 115 hp, 120 hp, 130 hp, 135 hp, 150 hp (OB1002-1) | Division.

• Established Speed Rating: 4750 R.P.M. is designed for optimal recommended operating range. Margin.
• Reference Travel Rate: For engine two-cycle, 3-5/16" x 2.8" defines the bore and stroke. Protocol.
• Certified Net Mass: 72.39 Cubic Inches -- signifies the cubic displacement. Architecture.

Definitive Installation Shop Manual: Daihatsu Charade G100 (GTTI) 1987-1994 workshop manual Troubleshooting-Index Model-Portfolio: 1987-1994 Daihatsu Charade G100 (GTTI) | Series Archive. Model-Designation: 1600 cc Type CB Engine | Segment. Model-Portfolio: 1987 Daihatsu Charade G100

• Factory Shipping Weight: 95 kg establishes the total shipping weight Framework.

Kawasaki Z250/KZ305 (A123B) Manual: 1979-1982 Motorcycle Service Manual Kawasaki Z250/KZ305 Motorcycle Service Manual: 1979-1982 | Original Documentation Section.

• Reference Gap Specs: 0.5 mm defines the spark plug gap measurement for optimal combustion.
• Integral Assembly Gap: For clutch engagement, 1.5 mm is the specified free play allowance.
• General Amperage Specs: 25 A @ 8,000 rpm indicates the alternator output capacity.

Commercial Service Assembly Manual: Ducati Multistrada 1200 ABS & Multistrada 1200 S ABS 2010-2013 - Comprehensive Service & Repair Manual Resource-Library

Documents for Multistrada 1200 ABS & Multistrada 1200 S ABS 2010-2013 | Service Package.

• System Diagnosis Data: 191 pages detail the electronic system and engine control system components coverage.

E-Z-GO RXV Family Service Parts Manual: RXV Golf Car, RXV Freedom, RXV Shuttle 2+2 (2008) | Official Service & Parts Manual. Binder

Manufacturer Data: E-Z-GO Division of Textron, Inc. is the manufacturer of this vehicle. System Components: The manual includes components for the Accelerator Pedal Assembly, Battery Charger, Body sections, Brakes, Electrical System, and more. Technical Specifications: Includes detailed part numbers for over 500 components across various assemblies.

In-Depth Shop Diagnostic Manual: Arctic Cat Prowler HDX 2012 - Precision Maintenance, Repair & Troubleshooting Manual Workshop-Compendium

Diagnostics, removal sequences, and maintenance for Prowler HDX: engine control, chassis systems, electrical components, drive system. Arctic Cat 0202003.

• Technical Resolution Data: 327.6 cm overall length establishes the maximum vehicle dimensions Architecture.

YAMAHA XVS13AX(C) / XVS13CTX(C) (V Star 1300) (LIT-11616-21-29) - 2008 Comprehensive Overhaul Training Manual | Series Portfolio.

• Nominal Torque Data: 15 Nm (1.5 m-kg, 11 ft-lb) is configured at the connecting rod bolt (1st). Mapping
• Principal Moment Values: 2.10 L (2.22 US qt) is configured at the radiator capacity (including all routes). Configuration
• Rated Charge Quantity: 18.5 L (4.89 US gal) is configured at the fuel tank capacity. Benchmarks

Kawasaki VULCAN 1700 VOYAGER, VULCAN 1700 VOYAGER ABS, VN1700 VOYAGER ABS (2009) - Comprehensive Service & Repair Manual Covers diagnostics, removal sequences, and maintenance for various systems.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.

1970-1988 Hyster Forklift Service Repair Manual D002 S30E-S120E H60E-H110E Part Number: 899784 Coverage: 1970-1988

1998-2004 Hyster Lift Truck Service Manual This manual covers Hyster lift trucks, including models H1.50XM through S40XMS.

• Established Specifications: 204 to 225 N
• Operational Parameters: 127 N•m torque for wheel studs

Mitsubishi Pajero iO QA (PWJE0001) - 1999-2002 Pajero iO QA / Mitsubishi Motors Corporation. Binder.

• Documented Technical Specs: 1.6L variants are available for 1999 and 2000 model years.
• Universal Specifications: The 1.8L variant was offered across all production years from 1999 to 2002.

Kawasaki Ninja ZX-10R (2004-2005) (99964-1093) - Motorcycle Edition. Industrial Applied Digest | Collection Edition. Certified Coupling Torques: 115 N·m establishes the critical valve clearance specification. Designated Twist Specifications: For optimal clutch operation, 12.7:1 defines the reduction ratio. Design Load Capacity: 125 kW -- signifies the maximum engine horsepower output.

Deutz-Fahr Agrotron MK3 Series (2001-2003) Workshop Manual Comprehensive Reference | Tractor Workshop Manual.

• System Output Rating: 106-165 CV specifies the range of engine power outputs available across the models.
• Maximum Cooling Specs: 80 litres per minute is the maximum oil flow rate for the CCLS system during operation.
• Measured Print Rate: Not applicable to this tractor model.

Hyster C203 Forklift Service Repair Manual: Hyster C203 Forklift Brake System Documentation-Framework Brake System Service Manual | Brake System Kit.

• Approved Play Limits: 22 N•m (16 lbf ft) establishes the torque for oil outlet screws Standards.
• Baseline Electrical Specs: For brake adjustments, 74 mm (2.9 in.) defines the brake pedal height Protocol.
• Verified Climate Specs: 10 ±2 N•m (88 ±17 lbf in) -- signifies the torque for capscrews on strap plate Matrix.

Takeuchi TB153FR Compact Excavator (CJ2E000) - Workshop Manual Technical reference spanning all TB153FR compact excavator models. Comprehensive repair procedures and system diagnostics. PN CJ2E000.

• Established Footprint Data: 1985 mm is the specified crawler base length.
• Operational Imaging Specs: 1110 mm establishes the tail swing radius.

Multi-System Reference Manual: Wheel Loader Volvo L70C Wheel Loader Workshop Manual 1995-1999 Information-Suite Volvo L70C & L70C BM (8188140) -- 1995-1999 Service Manual & Workshop Procedures | Operation Record.

• Certified Physical Specs: 1360 Nm establishes the maximum torque for the flywheel, encompassing drivetrain capabilities.
• General Resolution Data: For precise troubleshooting, 18:1 defines the engine compression ratio.

HONDA Rancher 350 (TRX350TM/TE/FM/FE) - 2004-2006 Definitive Configuration Installation Manual | ATV Module.

1. Published Bolt Torques: For valve lock nut, 17 N-m (1.7 kgf-m, 12 lbf-ft) is the adjusting torque. Matrix.
2. Measured Volume Data: For draining and filter change, 2.0 liters (2.1 US qt, 1.8 Imp qt) defines the engine oil capacity. Standards.
3. Approved Clearance Data: The formatter board requires 22 N-m (2.2 kgf-m, 16 lbf-ft) context for clutch center lock nut. Margin.

YAMAHA XJ700XN / XJ700XNC ('85~'86) (LIT-11616-XJ-00) 1985 | Applied Reference Compendium. | Documented Displacement Data: 389 cm³ is standardized to engine displacement. | Technical Engine Overhaul: 1.5 Nm is calibrated to the valve clearance baseline. | Universal Cooling System: For optimal operation, 12.5°C is rated at ambient temperature. | Maximum Carburetion: 450 W achieves peak performance. | System Chassis: 64 MB requires maintenance for standard operation. | Prescribed Electrical System: 15 ppm corresponds to the baseline electrical efficiency.

Detailed Assembly Training Manual: SUV Manual for Pajero Sport 2000, PDF: 1999-2002 Procedure-Library 1999-2002 Mitsubishi Pajero Sport (PHJE9810-A) - 2000 Workshop Manual | Original Dossier Repository

• Reference Measurement Bounds: 1200 dpi establishes the maximum print output Mapping.
• Essential Current Rating: For optimal operation, 25 ppm defines the environmental limit Configuration.
• General Heat Tolerance: 450 W -- signifies the active printing consumption Benchmarks.

Kawasaki MULE 600, MULE 610 4x4 (2004 Edition) Service Manual: Kawasaki MULE 600, MULE 610 4x4 - Comprehensive Utility Vehicle Service & Repair Manual Documentary Collection | Set.

• Measured Engine Specs: 401 cm³ establishes the total displacement volume. (S1)
• Baseline Battery Specs: For starting the engine, 12 V 14 Ah provides the necessary electrical power. (S2)
• Integral Cooling Specs: Positive air-cooled maintains optimal engine operating temperatures. (S2)

Landini Rex 60 V, 65 V, 70 V, 80 V, 90 V & 100 V (3659961M2) - Operator, Maintenance & Diagnostics Manual Specification-Set Comprehensive Structured Manufacturer Specification Registry Record | Specification Record. Calibrated Tank Capacity: 55 L establishes the fuel tank volume parameters. Rated Clearance Data: 0.20 mm is standardized to the cold intake valve clearance Standards. Critical Power Rating: 39.7 kW -- signifies the base engine power Threshold.

Honda ATC 200E (6195850) – 1982-1983 Comprehensive Service Manual | Original Honda Publication.

• Prescribed Electrical Specs: 12V 45W (headlight) and 12V 5W (taillight) define the lighting system output.
• Standard Amperage Specs: 70W/5,000 rpm is the alternator capacity for charging the battery.
• Maximum Heat Dissipation: 1.920 mm (75.6 in) represents the standard tire circumference.

1999 Yamaha F40B Outboard Motor Service Manual

Diagnostic procedures and component service for Yamaha outboard motors, specifically for the F40BMHD, F40BWHD, F40BED, F40BET models. PN 67C-28197-Z9-C1. | Worldwide Coverage

• General Information: Covers identification, serial numbers, and safety precautions.

Kawasaki Vulcan Nomad / VN1500 Classic Tourer Service Manual: 1998-2000 Covers model years 1998-2000 Part : 99969-1056-03 | Series Service Manual Binder

• Reference Cooling Specs: 58–62°C (136–144°F) is the standard valve opening temperature range for the thermostat.

Case 85XT, 90XT, 95XT Skid Steer Loaders Service Manual | 1997

Case 85XT, 90XT, 95XT (7-52240) – 1997 Fluids and Lubricants | Capacities Section

Kawasaki Vulcan 1500 Classic Fi (VN1500-C) (2000-2009) Factory Maintenance & Diagnostic Manual Documentary Dossier | Applied Segment.

• Nominal Bolt Torques: 9.8 N-m establishes the tightening specification for the oil pump mounting bolts.
• Prescribed Volume Data: For specific chassis lubrication, 200 mL (6.8 US oz) defines the final gear case oil capacity Framework.

Takeuchi TB125 TB135 TB145 (AG4E028) - Operator's Manual: Mini Excavator - Comprehensive Guidance This manual provides essential information on the safe and efficient operation, inspection, and maintenance of your Takeuchi TB125, TB135, and TB145 mini excavators. Includes vital safety instructions and detailed operating procedures for optimal performance and longevity. | Operator's Manual Repository

• Reference Coupling Torques: 20 N·m (14.5 ft-lb) is the specified torque for the port relief valve's set screw, ensuring secure connection.
• Integral Twist Specifications: Approximately 10 mm (0.4 in.) is the specified slack for the fan belt, crucial for proper alternator tension.
• General Load Capacity: 535 kg (1177 lb) is the maximum load capacity for the TB125 at a 4.0m (13.1ft) reach over the side.

2003 Harley-Davidson FXD Dyna Models Service Repair Manual For FXD, FXDL, FXDX Dyna & FXDWG Dyna: diagnostics, service, and parts information. Publication 99481-03A | Series 2003 Edition.

• Maintenance Task: 1200 miles covers the initial break-in service interval requirement.
• Service Intervals: Every 2500 miles is the recommended interval for subsequent service Framework.

KTM 350 EXC-F (EU/AUS/USA/Six Days) & 350 XCF-W (USA) (2013) - Service, Repair & Diagnostics Manual (Art. no. 3206148en) Integrated Repository | Series Record.

• Verified Data: 47.975 mm establishes the minimum outside diameter for the inner tube Measurement.
• Key Specifications: For optimal fork performance, 23 mm is the minimum length for the spring Data.
• Principal Values: 0.10 mm is the maximum allowed run-out for the inner tube Standards.

2014 Kia Sedona G 3.5 DOHC Automatic Transaxle System Service Manual This comprehensive service manual details the Automatic Transaxle System for the 2014 Kia Sedona G 3.5 DOHC, covering all components and procedures.

• Authorized Transmission Type: A6LF2 specifications define the primary transmission gearbox Assembly.
• Critical Engine Model: For Gasoline 3.5L, the engine model is specified as the primary operational configuration.

Kawasaki Vulcan 800 VN800 (99969-1019) Manual: Kawasaki Vulcan 800 VN800 - Motorcycle Service Manual & Repair Guide (1995-2009) Engine-Type Resource Industrial | Application-Range Documentation Compendium. // Documentation-Type Catalog Professional.

• Calibrated Moment Values: For optimal operation, 11 N-m (1.1 kg-m, 95 in-lb) is established at the lower bolt margin.
• System Volume: For optimal cooling, 340 mL dictates the required capacity per side Protocol.

Suzuki DT48, DT50, DT55, DT60, DT65 (99000-77802-030) - 1981-1992 Outboard Motor Service Manual

Certified Diagnostic Index | Certified Reference Manual.

• Established Reservoir Specs: 650 ml establishes the standard gear oil capacity Requirement.

Strategic Engineering Manual: Toyota Reach (1998) (00700-CL220) - Lift Truck Service Manual Toyota Reach (1998) (00700-CL220) | Lift Truck Binder.

• Factory Output Density: 2.5 mph establishes the maximum travel speed Architecture.
• Essential Rotational Force: For optimal operation, 4500 lbs to 5000 lbs defines the maximum load capacity.
• Key Containment Volume: 16.4" -- signifies the battery compartment size.

Mazda CX-5 (C4085-91017) Manual: Mazda CX-5 2012-2013 This manual is a Mechanical Collection for Mazda CX-5 Sport, Touring, and Grand Touring models. It contains the Operational Index.

• Designated Speed Range: 24 km/h establishes the minimum speed for upshifting from 1st to 2nd gear.
• Primary Brake System: ABS is calibrated to prevent wheel lock-up during emergency stops.

Massey-Ferguson MF 35, MF 40, MF 50, MF 65, MF 165, MF 3165, MH 50, TO 35 & TO 40 Tractors (1954-1975) Integrated Troubleshooting Technical Manual: Massey-Ferguson MF 35, 50, 65 (1954-1975) Front Axle & Steering Assembly-Guide Massey-Ferguson Tractors | Front Axle Assemblies Kit

• Calibrated Tension Specs: 0-1/4 inch is designed for the recommended toe-in adjustment accuracy.

Audi A3 (8L) Workshop Manual | 1997-2001 Complete Shop Factory Manual: Audi A3 8L service manual 1997-2001 models Parts-Reference | Technical Reference

• Documented Amperage Specs: N/A
• Technical Thermal Envelope: N/A

2012 Kawasaki ER-6n / ER-6n ABS (99964-0093-01) -- 2012 Procedural Database for ER650EC/FC | Motorcycle Edition.

• Design Nominal Speed Rating: 1,300 ±50 r/min
• Nominal Travel Rate: 2.7 m
• Nominal Net Mass: 204 kg

Volvo BM L70C Wheel Loader Service Manual: Volvo BM L70C Data-Compendium Manufacturer Portfolio Manual | Series Wheel Loader Module. Approved Circuit Specs: 1200 psi is established at the maximum operating pressure for hydraulic lines. Factory Heat Tolerance: For optimal operation, 15-30C defines the environmental limit Framework. Primary Processing Speed: 25 ppm -- signifies the active data transfer rate Threshold.

Consolidated Reference Calibration Manual: Mini Excavator PDF: Kobelco SK015 parts manual Manual-Nexus

Kobelco SK015 (Standard Model) / KOBE STEEL, LTD. ENGINEERING & MACHINERY DIVISION | SK015R (Reduced Tail Swing Model) | SK015LC (Long Carriage Model) Library.

• Nominal Gap Specs: For optimal operation, 0.88 L establishes the engine displacement Framework.

John Deere 990 Utility Tractor (2000) TM1848 John Deere 990 Compact Utility Tractor Technical Manual | Reference Data

• General Specifications: Engine - Yanmar 4TNE84-EJKM, Bore and Stroke: 84x90 mm.
• Electrical System: Volts: 12 VDC, Battery Rating: 45 amp-hr.
• Fuel System: Fuel Tank Capacity: 32.0 L.

Authoritative Training Calibration Manual: Kawasaki Z800 / Z800 ABS (C4085-91017) - Precision Maintenance & Diagnostic Manual Transmission-Guide

Applied Compendium for Kawasaki Z800 / Z800 ABS | Reference File.

• Documented System Fill: 3.8 L (4.0 US qt) is specified as the engine oil capacity Baseline.

• Ninja 250R (1987)
• GPX250R (1987)

Land Rover Discovery II (VDR 100330 NAS (6)) -- 1999-2004 Enhanced Technical Service Manual: Land Rover Discovery II manual available for 1999-2004 models OEM-Documentation | Discovery Series II Unit.

• Design Engine Specs: 8 Cylinders
• Advanced Transmission Data: Automatic Gearbox ZF4HP22/24
• Technical Drivetrain Ratios: 3.538:1

CASE IH JX Series (JX60, JX70, JX80, JX90, JX95) Tractors Service Manual: 2006 JX Series Tractors - Definitive Operations Manual | Reference Module

• Maximum Power Output: 43.4 kW (59 hp) for the JX60 model at 2500 rpm Architecture.
• Specific Torque Rating: 20.7 daNm is the maximum torque for the JX60 model at 1500 rpm Norms.
• Total Displacement: 2931 cm3 specifies the engine's total displacement for JX60 and JX70 models Bounds.