Search Results for: suzuki sidekick manual (4,865 results)

Brother MFC-6800, DCP-1000, MFC-9180, MFC-9160 — 2001 Documentary Advanced Portfolio | Service Manual Package.

• System Package Size: 459 x 458 x 354 mm (18.1 x 18.0 x 13.9 in) is standardized to the external machine dimension Benchmarks.
• Maximum Native Resolution: For optimal scanning performance, 600 x 300 dpi is calibrated to the optical CCD sensor output Range.

Sharp SF-2040, SF-D23, SF-S15, SF-S53, SF-DM11, SF-A55, SF-IC11 — 1996–2000 Diagnostic & Manufacturer Portfolio Set.

• Factory Load Capacity: Paper feed path supports 500 + 50 sheets within the upper and lower cassette assembly assembly Requirements.

Ferrari 308 Quattrovalvole, 328 GTB, 328 GTS — 1982–1989 Engineering Reference Handbook | 308/328 Series Packet.

• Nominal Displacement Data: 2926.9 cc (308) and 3186 cc (328) is set to establish the total engine cylinder volume Configuration.
• Prescribed Power Rating: For maximum output, 176.5 kW at 7000 rpm (308) and 198.6 kW at 7000 rpm (328) reaches the rated horsepower Benchmarks.

Sea-Doo GS, GTI, GTS, GTX, XP, GSX RFI, GTX RFI — 2000 Professional Service Archive | Sea-Doo Series Repository.

• System Energy Draw: 717 engine displacement is standardized to 717 cc (43.7 cu in) cylinder volume Mapping.
• Maximum Temperature Range: For optimal combustion chamber volume, 31.2 - 34.0 cc determines the 717 engine head capacity Configuration.

Case 580 D Backhoe Loader — 1981 Precision Engineering Sourcebook | 580 D Series Archive.

• Verified Output Rating: Hydraulic reservoir capacity is rated at 45.4 liters (12 gallons) system output Matrix.
• Key Cooling Specs: For optimal operation, 83 liters (22 gallons) fuel tank volume defines the fuel supply Margin.

Oliver 550 2-44 Tractor — 1960–1970 Reference Documentation Archive | 550 Series Agricultural Collection.

• Authorized Storage Capacity: Fuel tank volume reaches 16 gallons (60.6 L) is configured at standard configuration Benchmarks.
• Published Torque Values: Primary crankshaft output measures 113 N·m (83 lb-ft) at rated engine speed limits the fastening requirement Range.

Indian Chief, Deluxe, Springfield, Roadmaster & Centennial — 2003 Procedural Reference Handbook | Chief Series Collection.

• System Enclosure Specs: The POWERPLUS™ engine displacement is standardized to 100 cubic inches (1638 cc) representing the primary cylinder volume Requirements.

Indian Chief Vintage, Standard, Deluxe, Roadmaster, Springfield — 2001–2003 Certified Documentary Overview | Chief Series Repository.

• Engineered Footprint Data: 100 cubic inches is configured at the engine cylinder displacement Mapping.
• Measured Imaging Specs: For optimal performance, 67 hp at 4750 rpm represents the maximum rated horsepower Configuration.

Ferrari 365 GT4 — 1968–1973 Licensed Strategic Documentation | 365 GT4 Series Set.

• Documented Running Clearance: 0.15–0.25 mm is specified as the valve stem clearance Benchmarks.
• Technical Voltage Specs: For electrical system operation, 12 V requires the battery nominal output Range.

Commercial Assembly Installation Manual: Backhoe Loader Case 580 Super K (580SK) Construction King backhoe loader tractor service maintenance manual, covers 1991-1997 Knowledge-Base Documentary Reference Handbook | Case 580SK Super K Construction King File

• Nominal Wattage Specs: 1500 W establishes the active printing consumption Baseline.
• Principal Generation Capacity: For optimal operation, 50-60 GPM defines the environmental limit Requirements.
• Rated Technical Specs: 450 N-m -- signifies the active printing consumption Benchmarks.

Case 480C Backhoe Loader — 1976 Systematic Technical Sourcebook | 480C Series Section.

• Designated Clamp Forces: 68 N·m (50 lb-ft) is configured at the hydraulic cylinder rod fastener Requirements.
• Primary Tank Capacity: For transmission operation, 38 L (10 gal) is established at the main fluid reservoir Threshold.

Fordson Dexta & Super Dexta — 1958–1962 Technical Sourcebook | Dexta Series Dossier.

• Maximum Load Capacity: Engine displacement reaches 2062 cc (125.8 cu in) is rated at the base specification Architecture.
• Authorized Environmental Range: For safe operation, 0–40°C establishes the ambient temperature tolerance Framework.

Yamaha Virago XV750SE / XV750 (5G5-000101) — 1981-1984 Virago XV750SE / Yamaha Motor Corporation, Ltd — 1981-1984 Integrated Portfolio | Folder.

• Approved Ambient Limits: 15-30C defines the environmental limit Matrix.

Yamaha YZF-R6 (5SL-A7400-70) – 2004 Yamaha YZF-R6 (5SL-A7400-70) – 2004

• Published: Throughput Data: 14 T for the drive sprocket establishes the primary ratio for acceleration.
• Specific: Angular Speed: The transmission gears are configured at a 1.894:1 ratio for the 1st gear.
• Integral: Package Size: The 5SL-A7400-70 transmission gear set requires a total of 2.6 L of engine oil for proper lubrication.

Ducati SuperSport 800 (ZDM V5 00 AA X B) — 2006 Precision Engineering Digest | SuperSport 800 Series Section.

• Nominal Linear Velocity: The engine displacement achieves 803 cm³ (49 cu in) is standardized to define the maximum cylinder volume Mapping.
• Principal Form Factor: For optimal performance, 54.8 kW (74.5 CV) at 8250 rpm defines the rated horsepower output Configuration.

2006 Ducati Paul Smart 1000 LE (514 P.) Parts-Reference Manual: Ducati Paul Smart 1000 Service Manual (514 P.) Covers Ducati Paul Smart 1000 models with procedures for:

• Maximum Assembly Gap: 992 cm³ (60.5 cu in) corresponds to the engine displacement Architecture.
• Authorized Load Capacity: For optimal performance, 61 kW (83 CV) at 8000 rpm achieves the maximum rated horsepower Norms.
• Established Thermal Envelope: 83 Nm (8.5 kgm) at 6000 rpm — is calibrated to peak crankshaft torque output Bounds.

Yamaha XVS1100L, XVS1100LC, V Star 1100, DragStar 1100 (5KSJ, 5KSK, 5KSU, 5KSV) — 1999–2000 Integrated Technical Resource | XVS1100 Series Container.

• Engineered Climate Parameters: 950–1,050 r/min is calibrated to represent the engine idle speed baseline Sequences.
• Design Processing Speed: For optimal electrical regulation, 14.1–14.9 V governs the rectifier/regulator output Baseline.

Mitsubishi MT160, MT160D, MT180, MT180D, MT180H, MT180HD, MT210, MT210D, MT250, MT250D, MT300, MT300D — 1970s–1990s Precision Engineering Vault | Mitsubishi Tractor Service Repository.

• Calibrated Displacement Data: 776 cc (47.4 cu in) is specified as the K3A engine cylinder volume Baseline.
• Documented Power Output: For optimal performance, 11.6 kW (15.5 hp) is rated at the power take-off shaft threshold Framework.

Yamaha FZ700T, FZ750 — 1985–1988 Specialized Technical Resource | FZ700T/FZ750 Series Volume.

• Engineered Adjustment Range: Intake valve clearance is calibrated to 0.11–0.20 mm (0.0043–0.0079 in) cold measurement Requirements.
• Defined Power Rating: For optimal idling performance, 1,000 ± 50 r/min is designed for engine rotational speed Threshold.

Yamaha FZR400A, FZR400SAC — 1990 Comprehensive Diagnostic Repository | FZR400 Series Library.

• Authorized Operating Temps: The engine coolant system achieves a total volume of 1.9 L (1.7 Imp qt, 2.0 US qt) throughout all circulation routes Baseline.
• Published Burn-in Temperature: For reliable operation, the thermostat housing assembly opening pressure is specified at 74–103 kPa (0.75–1.05 kg/cm², 10.7–14.9 psi) Threshold.

Yamaha WR250F(V) — 2006 Professional Reference Registry | WR250F(V) Series Archive.

• Verified Power Draw: Engine output rated at 106.5 kg (234.8 lb) dry weight without oil and fuel represents the baseline machine Architecture.

Yamaha WR400F(N), WR426F(N) — 1998–2002

Manufacturer Compendium | WR Series Section.

• Basic weight reaches 121.5 kg across the model lineup

Yamaha YZ250F(S) (5XC1/5XC2/5XC4) — 2004 Precision Diagnostic Collection | YZ250F Series Manual Archive.

• Approved Wattage Specs: 249 cm³ (8.76 Imp oz, 8.42 US oz) is specified as the engine displacement Architecture.
• Baseline Generation Capacity: For optimal performance, 7.0 L (1.54 Imp gal, 1.85 US gal) represents the maximum fuel tank capacity Matrix.

Yamaha FJ1100 & FJ1200 (1984–1993) Comprehensive Service & Repair Manual | FJ-Series Technical Repository.

• Designated Resolution Data: 1,097–1,188 cc is configured at the engine displacement specification Mapping, establishing dual-model capacity with 74.0–77.0 mm bore dimensions Configuration.

Yamaha TT-R125(P), TT-R125LW(P) — 2002 Consolidated Engineering Blueprint | TT-R Series Library.

• Documented Clearance Data: 0.08–0.12 mm (0.0031–0.0047 in) is calibrated to the intake valve cold lash setting Specifications.
• Measured Power Output: For optimal off-road performance, 20.9 kW (28 hp) net flywheel horsepower is specified as the standard engine Framework.

Yamaha PW80(T) — 1991–1994 Certified Diagnostic Primer | PW80 Series Kit.

• Established Environmental Range: 4.9 L (1.08 Imp gal, 1.29 US gal) is measured at the fuel tank maximum capacity Architecture.
• Operational Speed Rating: For optimal engine performance, 79 cm³ (2.78 Imp oz) is set to the cylinder displacement Norms.

Yamaha LB2 / LB2M — 1978 Specialized Detailed Documentation Library.

• Measured Footprint Data: 1,585 mm length and 1,050 mm wheelbase is set to the overall vehicle dimensions Requirements.
• Established Imaging Specs: The 49 cc engine displacement specifies a single-cylinder, two-stroke, air-cooled configuration Threshold.

Yamaha PW50(P) — 2001 Mechanical & Industrial Compendium | PW50(P) Series Binder.

• Documented Ambient Limits: The engine displacement achieves 49 cm³ (1.72 Imp oz, 1.66 US oz) is standardized to the monocylinder architecture Requirements.
• Calibrated Cycle Rate: For off-road performance, the bore diameter measures 40.0 mm and stroke reaches 39.2 mm (1.575 × 1.543 in) which determines the displacement Threshold.

Yamaha PW50(R) — 2002 Applied Reference Portfolio | PW50(R) Series Repository.

• Documented Fluid Capacity: Engine oil tank capacity is standardized to 0.3 L (0.26 Imp qt, 0.32 US qt) Sequences.
• Measured System Fill: For proper fuel operation, 2.0 L (0.44 Imp gal, 0.53 US gal) is rated at the tank volume Baseline.

1996 Sea-Doo GTX Shop Manual + Parts Catalog + Racing Handbook: Bombardier Recreational Products Inc (5640 GTX) – 1996 Detailed Shop Manual | Parts Catalog Set

• Engineered Processing Speed: Maximum throughput reaches 25 ppm Parameters.
• Defined Mass Specs: The formatter board requires 64 MB for standard operation Logic.
• Standard Precision Specs: For optimal operation, 15-30C defines the environmental limit Framework.

Yamaha YZF-R1 (1998–2002) — 1998–2002 Systematic Sourcebook | YZF-R1 Series Packet.

• Engineered Thermal Rating: 1,050 ~ 1,150 r/min is calibrated to the engine idling speed Architecture.
• Factory Feed Speed: For optimal carburetor performance, the fuel tank capacity reaches 18 L (including reserve at 5.5 L) Configuration.

Harley-Davidson Softail, Fat Boy, Heritage Softail Classic, Night Train — 2006 Detailed Technical Reference | Softail Series Repository.

• Designated Storage Capacity: Engine oil tank reaches 3.5 qt. (3.31 L) with filter is set to accommodate the complete lubrication requirements.

Triumph Tiger 100, Tiger 90, Speed Twin & Twenty-One — 1957–1974 Certified Commercial Compendium | T100 Series Record.

• Approved Circuit Specs: 490 c.c. (30 cu. ins.) is designed for the engine cylinder volume Architecture.
• Baseline Heat Tolerance: For optimal performance, 9.0:1 compression ratio controls the combustion chamber pressure Protocol.

New Holland 575E, 655E, 675E — 2000–2010 Professional Automotive Repository | E-Series Loader Backhoe Collection.

• Established Velocity Specs: Maximum engine idle speed of 680–850 rpm corresponds to the base operational Architecture.

New Holland LB75–115 Series Backhoe Loader — 2000–2005 Mechanical Technical Reference | LB Series Compact Suite.

• Measured Displacement Data: 4987 cm³ (304 in³) is specified as the engine cylinder volume Sequences.
• Primary Power Output: The diesel engine generates 92–108 hp (69–80.5 kW) at rated speed Baseline.

New Holland DC70/DC80/DC100 Dozer Series — 2000 Technical Reference Unit | Construction Dozer Collection.

• Verified Reservoir Specs: For hydraulic operation, 85 L (22.4 gal) represents the equipment fluid storage volume Architecture.
• Calibrated Displacement Data: 3920 cm³ (239.1 in³) is specified as the engine cylinder volume Specification.

Troy-Bilt® Sickle Bar 34032, 34033, 34034, 34035 — 2000s Consolidated Engineering Portfolio | Sickle Bar Series Repository.

• System Rotational Force: Maximum blade speed is standardized to 1,120 rpm engine operation Mapping.
• Core Storage Capacity: For hydraulic operation, 5.5 L (1.4 gal) is rated at transaxle fluid requirement Configuration.

ASV SR-70/SR-80 Rubber Track Loader — 2006–2007 Mechanical Industrial Registry | SR Series Packet.

• Documented Containment Volume: The hydraulic tank is configured at 12.25 U.S. gallons (46.4 liters) service refill capacity, representing primary system storage Requirements.

New Holland LS140, LS150 Skid Steer Loader — 1990s–2000s Mechanical Industrial Portfolio | Final Drive Collection.

• Reference Cycle Rate: The boom raise cycle time achieves 3.5 seconds for the LS140 model and 3.3 seconds for the LS150 Rotation Data, representing standard hydraulic performance specifications.

Takeuchi TB138FR TB153FR TB180FR Excavator Operator's Manual (247 P.) OEM-Documentation Takeuchi TB138FR/TB153FR/TB180FR (AL5E003) — 2006 Structured Sourcebook & Binder.

• Nominal Angular Speed: 9.5 rpm is set to the maximum slew rotation Framework.
• Prescribed Enclosure Specs: For optimal operation, 30° defines the maximum gradeability Threshold.

International Cub Cadet 73, 106, 107, 126, 127 & 147 — 1979 Detailed Blueprint for Series Repository.

• Measured Horsepower Output: The Model 73 engine establishes a baseline of 7 hp, while Models 106 and 107 provide 10 hp, Models 126 and 127 reach 12 hp, and the Model 147 yields 14 hp peak power Architecture.

International Cub Cadet 72, 104, 105, 124, 125 — 1967–1969 Functional Primer Vault | Cub Cadet Series Kit.

• Prescribed Load Capacity: The hydraulic pump is rated at 2.5 gallons per minute at pressures up to 400 PSI Bounds.
• Standard Environmental Range: For optimal operation, engine oil change is specified as every 30 hours of operation Matrix.

International Cub Cadet 1000, 1200, 1250, 1450, 1650 — 1974–1980 Professional Reference Registry | Cub Cadet Series Record.

• Calibrated Displacement Data: Engine idle speed is rated at 1800 rpm for standard carburetor tuning Architecture.
• System Volume Data: For hydraulic operation, 12 psi provides the recommended tire inflation pressure Norms.

Mustang Loader 940 Series — 1994 Diagnostic & Technical Library | 940 Series Folder.

• Verified Imaging Specs: 2325 psi is measured at the main relief valve setting for hydraulic system pressure Architecture.
• Key Coupling Torques: For optimal performance, the fastening specifications are set to standard grade mechanical fasteners Norms.

Mustang Heavy Machinery 2050 Skid Steer Loader — 1998–2002 Detailed Commercial Portfolio | 2050 Series Compendium.

• Design Rotational Force: The engine block is designed for 67 N·m (49 lb-ft) peak torque output Margin.
• Advanced Storage Capacity: For hydraulic operation, 95 L (25 gal) delivers maximum fluid reservoir architecture Protocol.

Bolens 600-1656 Medium Tube Frame Tractors — 1978 Mechanical Industrial Portfolio | Medium Tube Frame Collection.

• Authorized Reservoir Specs: 2-3/4 pints is calibrated to the engine crankcase volume capacity Requirements.
• Published Displacement Data: For engine sizing, 23.7 cu. in. governs the piston displacement on HH-100 and HH-140 Tecumseh engines Threshold.

Cub Cadet Garden Tractors 1340, 1535, 1541, 1860, 1862, 1782, 1882, 2082, 2182 — 1990–1991 Systematic Technical Resource | Garden Tractor Series Repository.

• Engineered Clearance Data: Intake valve gap is configured at 0.10–0.15 mm (0.004–0.006 in) cold engine Mapping.
• Measured End Play: Crankshaft journal bearing clearance is established at 0.05–0.13 mm (0.002–0.005 in) Configuration.

Husqvarna SM 610 & TE 610 — 2006 Precision Engineering Vault | SM/TE Series Repository.

• Calibrated Engine Displacement: 576.28 cm³ (35.15 cu in) is specified as the single-cylinder volume Architecture.
• Measured Compression Ratio: 11.1:1 — represents the established combustion chamber pressure Framework.

KYMCO Agility 50 — 2004–Present Strategic Database for Agility 50 Dossier.

• Published Production Rate: Engine displacement reaches 49.5 cc is specified as the cylinder volume Bounds.
• Specific Physical Specs: For optimal performance, 3.5 kW at 7500 rpm is rated at the maximum power output Topology.

BMW K 75, K 75 C, K 75 S, K 75 RT — 1986–1991 Technical Integrated Handbook | K 75 Series Repository.

• Documented Assembly Gap: 57 x 70 mm bore × stroke is configured at the piston crown structure design Sequences.