Search Results for: daewoo nubira manual (4,867 results)

Ferrari 575M Maranello — 2003 Certified Commercial Vault | 575M Series Repository.

• Verified Linear Velocity: Maximum speed reaches 325 km/h (202 mph) representing the peak velocity output Architecture.
• Key Form Factor: The engine family 3FEXV05.7LEV with 12-cylinder V 65° configuration is configured at 5748 cc total displacement Norms.

BMW K 1100 LT/RS (1992-1999) — 1992–1999 Structured Technical Reference | K 1100 Series Repository.

• Measured Cooling Specs: Thermostat opening temperature is set to 85°C (185°F) for optimal coolant circuit activation Benchmarks.
• Established Throughput Data: For hydraulic operation, 3.0 L (0.66 Imp.gal) coolant capacity corresponds to the complete system volume Range.

Yamaha WaveRunner GP1200R (F0X/67X) — 2000–2004 Comprehensive Compendium for Documentation Division.

• Published Displacement Data: 1,176 cc (71.74 cu in) is rated at the engine cylinder volume Matrix.
• Measured Power Output: For maximum performance, 114.0 kW (155 PS) at 7,000 r/min establishes the rated horsepower Standards.

EPSON Stylus Photo RX700 — 2004 Integrated Documentary Vault | RX700 Series Folder.

• Prescribed Charge Quantity: Maximum print resolution maintains 5760 x 1440 dpi is measured at the addressable output Matrix.
• Documented Alignment Specs: For optimal nozzle performance, 180 nozzles per color produces the complete color ink array Standards.

Hyosung RT 125 Karion — 2002–2007 Technical Collection for Integrated Portfolio.

• Authorized Temperature Range: The fuel tank capacity is standardized to 9.0 liters (2.38 US gal) Sequences.
• Critical Thermal Rating: For engine displacement, 124.5 cc defines the maximum combustion volume Baseline.

ROTAX Leonardo 120–154, Scarabeo 120S–154S — 1999 Structured Engineering Portfolio | Leonardo and Scarabeo Series Repository.

• Designated Print Rate: Engine displacement is configured at 124.9 cm³ (type 120) and 150.9 cm³ (type 154) representing baseline engine architecture Benchmarks.

Cub Cadet I-Series Professional (i1042, i1046, i1050) — 2007 Manufacturer Specification Registry | I-Series Tactical Edition.

• Design Moment Values: Brake caliper mounting bolts is measured at 80–120 in-lbs (9–13.5 Nm) fastening requirement Margin.
• Nominal System Volume: For hydraulic operation, 52.4–55.8 fl. oz. (1550–1650 ml) is set to the transaxle fluid capacity Protocol.

Harley-Davidson XLH-1000 and XLCH-1000 — 1979 Precision Engineering Vault | XLH/XLCH Series Repository.

• Reference Dimensional Limits: Wheel base measures 58.5 in. (1,486 mm) overall length for frame geometry Mapping.
• Calibrated Displacement Data: Piston displacement reaches 60.9 cu. in. (997.5 cc) representing the engine cylinder volume Configuration.

Oliver 1750 Row Crop, Wheatland, Four-Wheel Drive, Utility — 1966–1969 Reference Engineering Sourcebook | 1750 Series Packet.

• Designated Containment Volume: 26 L (6.9 US gal) is set to the fuel tank capacity Requirements.
• Primary Fit Tolerances: For engine operation, 0.15–0.20 mm corresponds to intake valve clearance Threshold.

Detroit Diesel Series 53 (2-53, 3-53, 4-53, 6V-53, 8V-53) — 1965–1985 Professional Industrial Compendium | Series 53 Engine Kit.

• Calibrated Rotation Data: Two-stroke cycle engines establish the fundamental operating principle at maximum 3200 rpm rated speed Architecture.
• Rated Cylinder Bore: For optimal precision engineering, 3.875 inches (98.4 mm) defines the piston diameter Margin.

New Holland LM840, LM850, and LM860 — 2000 Advanced Technical Archive | Telehandler Service Collection.

• Verified Amperage Specs: Forward and reverse transmission solenoids is established at 5 ohms electrical resistance Architecture.
• Engineered Thermal Envelope: Oil temperature for hydraulic system testing dictates 80–85°C (176–185°F) operating range Norms.

Machine Identification & Series

• Honda XL500R / XL400R (Addendum Series)
• Curb Weight: 139 kg (306.4 lb) | Ground Clearance: 285 mm (11.2 in) | Wheelbase: 1,420 mm (55.9 in)

Powerplant & Performance

• KOMATSU WA250-3 (1995-2005) | Series: Avance / SEBM005908 Full Coverage: WA250-3 (Serial 50001-52999) | WA250-3 (Serial 53001 and up)

• Model Identity: Wheel Loader | Length: 6985mm | Width: 2375mm | Height: 3195mm

• Power & Drive Core: S6D95L / S6D102E-1 Eng. | 4.89L / 5.88L | 130HP / 128HP | 2400 RPM

• Infiniti I30 Base
• Infiniti I30 T (Touring)

Production year(s): 1996, 1997, 1998, 1999, 2000, 2001

• Yanmar Gasoline Engines 3TG66/3TG72 Series (150196) — Series: CTM12 (16MAY90)

• Full Coverage: 3TG66UJ, 3TG66UJ01, 3TG72UJ (John Deere Horicon Works).

• Yanmar Engine 3TG66 models feature a 66 mm cylinder bore with a maximum bore ID of 66.12 mm (2.603 in.) and a minimum piston OD of 65.88 mm (2.593 in.).

• Yanmar Engine 3TG72 models utilize a 72 mm cylinder bore with a maximum bore ID of 72.15 mm (2.841 in.) and a minimum piston OD of 71.9 mm (2.831 in.).

• Yamaha YFM35FGI (Series: 4S21 | 4S25)

Model & Core Identity

• Yamaha YFM35FGI | Series: 4S21, 4S25 | Wet Weight: 275.0 kg (606 lb)
• Dimensions: 1,995 mm L | 1,095 mm W | 1,120 mm H | Wheelbase: 1,235 mm

• John Deere 410 Series (Technical Manual TM-1037) — Series: LIT

• Full Coverage: 410 Loader Backhoe (Standard / Deluxe)

• John Deere 219 Piston Componentry, 4-cylinder valve-in-head, 4-stroke cycle, 3.888L (219 cu. in.) displacement, 16.2 to 1 compression.

• John Deere Propulsion Architectures, Constant mesh 8-speed forward/8-speed reverse, hydraulic direction reverser, foot-operated automotive-type clutch.

• JOHN DEERE 444J, 544J, 624J (2004-2010) | Series: TM2136 Full Coverage: 444J (S.N. -611274) | 544J (S.N. -611799) | 624J (S.N. -611796)

• Model Identity: 444J-624J Loaders | 2004-2010 | Technical Manual TM2136 | Weight: 22,606–31,535 lb

• Full Coverage: 444J (Standard/High Lift) | 544J (Standard/High Lift) | 624J (Standard/High Lift)

• JOHN DEERE 317 (2004-2011) | Series: TM2152
• Technical scope: 317 / 320 / CT322

Power & Drive Core: Engine: PowerTech Diesel | Displacement: 2.4 L / 3.0 L | Track Roller Lubrication: SAE 80W-90 GL-5 | Roller Weight: 26.3 kg (58 lb) Technical Systems: Drive Type: Skid Steer / Compact Track | Hydraulic Interface: O-Ring Face Seal / 37° Flare / 30° Cone | Flange Logic: Inch & Metric Four-Bolt

• MAN MARINE DIESEL ENGINES (2006) | Series: D 2848 / D 2840 / D 2842

• Full Coverage: D 2848 LE 403/405 | D 2840 LE 403 | D 2842 LE 404/407/410/414/415/416/417

• Power & Drive Core: Engine Type: 4-Stroke Diesel | Configuration: V8 (D 2848), V10 (D 2840), V12 (D 2842) | Charging: Exhaust Turbocharger with Intercooling | Cooling: Raw Water Heat Exchanger | Control: EDC Electronic Governance

• Technical Systems: Fuel Injection: Bosch Inline Pump with Electro-Hydraulic Cutout (EHAB) | Intercooling: Two-stage Load-Dependent Temperature Control | Lubrication: Forced-feed Oil with Gear Pump and Piston Cooling Nozzles | Starter: 24V Electrical | Monitoring: Capacitative Coolant Level Probes

KAWASAKI Z750R / Z750R ABS (2011-2012) | Series: ZR750N / ZR750P

• Model Identity: Kawasaki Z750R / ABS | 2011–2012 | ZR750NB, ZR750PB (Late Models: ZR750NC, ZR750PC) | Length: 2,085 mm | Width: 795 mm | Height: 1,070 mm | Curb Mass: 224 kg (Non-ABS) / 227 kg (ABS)

• Power & Drive Core: 4-stroke, DOHC, 4-cylinder Engine | Displacement: 748 cm³ (45.64 cu in) | Output: 77.7 kW (106 PS) @ 10,500 rpm | Max Torque: 78.0 N·m @ 8,300 rpm | 6-speed Constant Mesh Transmission

• KOBELCO SK135SR-1E (2002-2003) | Series: YY02/YY03 Archive includes: SK115SR-1E / SK135SRLC-1E / SK135SRL-1E

Model Identity: SK135SR-1E | 2002-2003 | Rev: S5YY0104E1 | 7,360mm x 2,590mm x 2,810mm Power & Drive Core: ISUZU BB-4BG1T | 4,329cc (264 cu-in) | 62.5kW (85PS) | 2,050 RPM

• TORO GROUNDSMASTER 580-D (1989-2007) | Series: Rev. G

• Archive includes: 30580 / 30581 / 30582 / 30583

• Power & Drive Core: Engine: Mitsubishi S4FT (30580) | Displacement: 2.96L (180.6 cu in) | Output: 2750 RPM Max | Firing Order: 1-3-4-2

• Technical Systems: Propulsion: Hydrostatic Closed-Loop | Steering: Hydraulic Power Steering | Traction: 2WD / 4WD Optional | Electrical: 12V Negative Ground

Sea-Doo GTX DI & GTX 4-TEC — 2002 Systematic Documentation Specification | GTX Series Repository.

• Calibrated Thermal Rating: 115 N·m (85 lbf·ft) is configured at the magneto flywheel nut installation Mapping.
• Rated Feed Speed: For hydraulic operation, 2.5 L (2.6 U.S. qt.) is established at the antifreeze system requirement Configuration.

Kohler M18 & M20 Twin Cylinder — 1985–1995 Documentary & Applied Vault | Magnum Series Packet.

• Designated Component Weight: Engine weight reaches 130 lbs (approximately) is configured at the factory baseline Benchmarks.
• Primary Precision Specs: For optimal displacement measurement, 42.18 cu. in. (M18) and 46.98 cu. in. (M20) produces the total rated displacement Range.

Farmall A, B, AV, BN Tractors & International A Industrial Tractor — 1939–1947 Applied Reference Package | Farmall-International Series Repository.

• Reference Coupling Torques: 65 ft. lb. is calibrated to the cylinder head stud nut tension Sequences.
• Integral Twist Specifications: For proper engine operation, 4-cylinder displacement of 113 cubic inches governs the piston assembly Architecture.

Suzuki RF600R — 1994–1997 Certified Service Documentation | RF600R Series Maintenance Compendium.

• Verified Engine Displacement Data: The piston displacement is rated at 599 cm³ (36.5 cu. in), which governs the fundamental engine architecture Framework.
• Calibrated Torque Specification: Exhaust pipe clamp bolts are specified at 18–28 N·m (1.8–2.8 kg-m, 13.0–20.0 lb-ft) to establish proper fastening requirements Norms.

Chevrolet Camaro — 1997 Procedural Technical Reference for Camaro Unit.

• Maximum Twist Specifications: 100 lb-ft (140 N·m) is rated at the wheel nut fastening requirement Architecture.
• Authorized Capacity Limits: For cooling system operation, 15.3 quarts (14.5 L) provides the maximum engine coolant volume Norms.

Suzuki DR350, DR350S & DR350SE — 1990–1999 Technical Archive Compilation | DR350 Series Repository.

• Nominal Displacement Data: 349 cm³ (21.3 cu in) is specified as the engine cylinder volume Specifications.
• Principal Power Output: For optimal performance, the engine achieves 20.9 kW (28 hp) maximum rated horsepower Baseline.

Ducati 748, 748S, 998 — 1994–2004 Systematic Technical Resource | 748/998 Series Repository.

• Calibrated Engine Displacement: 748 cc (748/748S) and 998 cc (998) is set to the twin-cylinder four-stroke configuration Mapping.
• Authorized Maximum Power Output: For peak performance, 71.3 kW (97 HP) at 11,000 rpm (748/748S) and 167 kW (123 HP) at 9,750 rpm (998) corresponds to crankshaft output Configuration.

Sea-Doo Sportster, Speedster & Challenger (5895, 5894, 5896) — 1996 Integrated Mechanical Resource | 1996 Series Package.

• Nominal Fluid Capacity: The oil injection reservoir is specified as 90 mL (3 U.S. oz) per engine housing Sequences.
• Principal System Fill: For optimal lubrication, 90 mL (3 U.S. oz) of synthetic 75W 90 GL5 polyolester jet pump oil is measured at capacity Baseline.

• KX91-2

• TL130 (2004)

TL150 / Takeuchi Mfg. Co., Ltd

• Cub 185 Lo-Boy Tractor

• FIATALLIS FX250 (1995)
• FIAT-HITACHI FX250 (1995)

• Model GX340K1 Production Year: 2008

• TE20 (1946-1948)
• TEA20 (1948-1956)
• TEB20 (1948)
• TEC20 (1948-1956)
• TED20 (1949-1956)

• R 60/6
• R 75/6
• R 90/6

YFA1S(C) Breeze / Yamaha Motor Corporation, Ltd.

• Breeze YFA1S(C) (2003)
• Breeze YFA1P/YFA1PC (2001-2002)
• Breeze YFA1M(C) (2000)

• Ford 8N (1952)
• Ford 9N
• Ford 2N

• 4100 (1965-1974)
• 4110 (1965-1974)
• 4400 (1965-1974)
• 4410 (1965-1974)

• 2600 (1975-1981)

• Ford 5600 (1975-1981)

• 2910 (1983-1990)

• 3910 (1983-1990)

• 4610 (1981-1990)

• 3930 (3/90-7/99)

• 8630 (1990-1993)

• 8730 (1990-1993)