Search Results for: daewoo lanos manual (4,867 results)

Yamaha EW50 — 2000 Expert Guide Library | EW50 Series Record.

• Calibrated Engine Data: 49.2 cm³ (3.0 cu in) is established at the air-cooled 2-stroke single-cylinder displacement Architecture.
• Rated Compression Ratio: For optimal combustion, 7.2:1 is standardized to the gasoline torque induction requirement Norms.

Yamaha GP800 WaveRunner GP — 1998 Consolidated Mechanical Primer & Mechanical Vault Kit.

• Certified Installation Footprint: 784 cm³ (47.8 cu. in) corresponds to the engine displacement Architecture.
• Measured Maximum Resolution: For optimal performance, 88.3 kW (120 hp) at 7,000 r/min is calibrated to the peak power output Norms.

Yamaha XN125 / XN150 (5MF1-AE2) — 2000

Technical Service Portfolio | Teos Series Repository.

• Calibrated Displacement Data: 124 cm³ [152 cm³] is specified as the engine cylinder volume Benchmarks.

Honda ATC110 — 1985 Systematic Technical Sourcebook | ATC110 Series Packet.

• System Interference Fit: Engine displacement reaches 105 cc (6.4 cu in) is standardized to the single-cylinder configuration Benchmarks.
• Measured Circuit Specs: For maximum performance, 6.5 BHP at 7,750 rpm defines the rated horsepower output Range.

Yamaha YBR125ED (3D9-F8197-E0) — 2005 Systematic Manufacturer Overview | YBR125ED Series Portfolio.

• Authorized Throughput Data: 123.7 cm³ (7.55 cu.in) is configured at the engine displacement capacity Architecture.
• Critical Angular Speed: For optimal performance, 10.0:1 produces the compression ratio Threshold.

Detailed Procedure Safety Manual: Honda 2004 TRX400FA FourTrax AT Owner's Manual Honda TRX400FA (Unknown Part Number) — 2004 | Owner's Manual. Kit.

• System Output Performance: 14.7 kW (19.7 hp) corresponds to the nominal engine power output Mapping.
• Maximum Gross Dimensions: For displacement data, 254 kg (560 lbs) reaches the factory dry weight baseline Configuration.

Structured Quality Overhaul Manual: Honda TRX400FA/FGA FourTrax Rancher AT Owner's Manual Calibration-Manual Honda TRX400FA/FGA FourTrax Rancher AT (N/A) — 2004–2005 Compendium.

• Verified Linear Velocity: 3.0 US qt (2.8 L) is the specified engine oil capacity Architecture.
• Key Form Factor: For optimal operation, 0.03–0.04 in (0.8–0.9 mm) is the spark plug gap Norms.
• Prescribed Optical Resolution: 1,400 ± 100 rpm -- signifies the engine idle speed in neutral Bounds.

Yamaha YZ250F(V) — 2006–2007 Precision Engineering Sourcebook | YZ250F Series Repository.

• Calibrated Displacement Data: 249 cm³ (8.76 Imp oz, 8.42 US oz) is established at the engine cylinder volume Topology.
• Measured Compression Ratio: For optimal ignition timing, 12.5:1 represents the piston chamber pressure Standards.

Takeuchi TL150, TB175 Crawler Loader — 2004–2005 Procedural Technical Consolidation | TL150 Series Dossier.

• Calibrated Displacement Data: 4412 mL total displacement is designed for the four-cylinder diesel engine Architecture.
• Advanced Power Output: 75.8 kW at 2200 rpm and 72.0 kW at 2200 rpm represents maximum rated horsepower Framework.

Reference-Grade Workshop Manual: Takeuchi TB53FR Compact Excavator Workshop Manual Specification-Set Takeuchi TB53FR Compact Excavator (15810005~) -- 2005–2012 Integrated Specification Registry | TB53FR Series Toolkit.

• Factory Technical Data: Maximum Storage Capacity: 120 L (31.75 US gal) hydraulic tank capacity provides continuous operational supply Architecture.

Suzuki GSX-R1000 / GSX-R1000 K5 — 2005 Engineering Consolidated Repository | GSX-R1000 Series Segment.

• Authorized Securement Values: The engine displacement specifies 999 cm³ (61.0 cu. in) is set to represent the four-cylinder liquid-cooled power unit Mapping.
• Published Fluid Capacity: For optimal lubrication, 3.3 L (3.5/2.9 US/Imp qt) corresponds to the engine oil requirement during filter change Configuration.

JCB 2D, 2DS, 3, 3C, 3CS, 3D & 700 — 1970–1982 Automotive Engineering Documentation | Excavator Series Kit.

• Verified Installation Footprint: Engine displacement of 3.77 litres (230 cu in) is rated at the BLMC 38TD four-cylinder diesel configuration Bounds.
• Key Maximum Resolution: Pump flow at 2000 rev/min and maximum pressure establishes 102 litres/min (22.5 UK gal/min) output topology Matrix.

Suzuki GS750 — 1976–1978 Operational Technical Reference | GS750 Series Unit.

• Verified Climate Specs: The engine displacement volume is rated at 748 cc (45.6 cu in) establishing the basic architecture Bounds.
• Calibrated Heat Dissipation: For optimal cooling, 223 kg (492 lbs) dry weight supports the chassis suspension Topology.

Verified Engineering Manual: Suzuki GSF1200 / GSF1200S Service Manual Data-Compendium Suzuki GSF1200/S Bandit (99500-39134-01E) — 1996–1999 | Licensed Technical Repository | GSF1200 Series Section.

• Engineered Addressable Resolution: 1157 cm³ (70.6 cu in) is calibrated to the complete engine cylinder volume Benchmarks.
• Defined Bolt Torques: For optimal fastener security, 23 N·m (2.3 kg·m, 16.5 lb-ft) supports the exhaust pipe clamp attachment Range.

Certified Maintenance Manual: Motorbike 1988-1997 Suzuki DR750SJ Service Manual Procedure-Library Suzuki DR750SJ — 1988–1997 | Certified Diagnostic Handbook | DR750SJ Series Module.

• Reference Electrical Load: 727 cm³ (44.4 cu. in) establishes the engine displacement Architecture.
• Integral Temperature Range: For optimal operation, 9.5:1 defines the compression ratio Framework.
• General Bore Specification: The cylinder requires 105 mm (4.134 in) as the primary cylinder dimension Baseline.

Xerox Phaser 7300 Color Printer — 2002 Reference Digital Blueprint Portfolio.

• System DPI Rating: 600 × 600 dpi is configured at the standard print resolution Framework.
• Core Fastening Values: For optimal performance, 113 N·m (83 lb-ft) limits the blade cap screw fastening requirement Baseline.

Takeuchi TB175 (17510003–17512749) — 2003–2010 Strategic Operational Archive | TB175 Series Repository.

• Calibrated Displacement Data: 228–250 N·m (168–184 lb-ft) is designed for the maximum engine torque output Matrix.
• Advanced Power Output: The engine delivers 18.0 kW (24.1 hp) rated at 2230 ±60 rpm Bounds.

Complete Engineering Overhaul Manual: Takeuchi TB020 Compact Excavator WD3-101E1 Workshop Manual Field-Reference Reference Catalog | Specification Portfolio.

• Nominal Bolt Torques: 1.0-5.6 kgfm signifies the essential bolt tightening specifications Requirements.
• Prescribed Volume Data: For optimal operation, 1.123 cc (68.5 cu in) supports the standard engine displacement Configuration.
• System Clearance Data: 61 mm -- indicates the basic dimension for the link height in the configuration Benchmarks.

Takeuchi TB015 WC3-101E5 — 1999 Precision Engineering Vault | TB015 Series Repository.

• Calibrated Displacement Data: 879 cc represents the engine cylinder volume Architecture.
• Measured Power Output: For optimal performance, 16 PS at 2,550 rpm specifies the rated horsepower Specifications.

Piaggio X9 Evolution 500 (633234) — 2005 Comprehensive Technical Reference | X9 Evolution Series Repository.

• Maximum Displacement Data: 460 cm³ (28 cu in) is standardized to the single-cylinder four-stroke engine architecture Specifications.
• Authorized Power Output: For optimal performance, 29.5 kW at 7500 rpm dictates the maximum net flywheel horsepower Framework.

Functional Instructional Diagnostic Manual: ATV 2005 Honda TRX350FM FourTrax 350 4x4 Owner's Manual Service-Dossier Honda TRX350FM FourTrax 350 4x4 (Owner's Manual) — 2005 Engineering Vault | FourTrax 350 Series Collection.

• Documented Displacement Data: 20.08 cu-in (329.1 cm³) is configured at the engine cylinder volume Mapping.
• Technical Tank Capacity: For optimal operation, 3.67 US gal (13.9 ℓ) is established at the fuel tank volume Configuration.

Honda TRX350TE Fourtrax 350 ES — 2000–2006 Specialized Documentation Database | TRX350TE Series Binder.

• Documented Power Framework: 13.9 L (3.67 US gal) is set to the fuel tank capacity including reserve Requirements.
• Measured Operating Temps: For off-road conditions, 20 kPa (2.8 psi) specifies the recommended tire pressure standard Threshold.

Maserati M138 M139 Coupe Spyder Quattroporte (MNA-12) 2002-2008 Expert Specialized Functional Index | Series Unit.

• Prescribed Coupling Torques: 47.129 – 47.135 CLASS X is designed for internal tolerances.
• Standard Twist Specifications: For engine operation, 1.727 – 1.732 defines the measurement range Framework.
• Core Holding Capacity: 43.630 – 43.637 CLASS X -- signifies the component's capacity Threshold.

Arctic Cat ATV 250 DVX & Utility Models — 2007 Mechanical Industrial Vault | ATV 250 Series Library.

• Reference Processing Speed: 1250–1350 rpm is calibrated to the engine idle speed Requirements.
• Integral Mass Specs: For optimal engine displacement, 66 x 72 mm (2.60 x 2.84 in.) is designed for the cylinder bore and stroke Threshold.

Arctic Cat 700 Diesel ATV (ac07700dieselservicemanual) — 2007 A Licensed Strategic Portfolio | 700 Diesel Series Collection.

• Engine Specs: 20.81 L (5.5 U.S. gal.) is the rated fuel tank capacity Baseline.
• Cooling Specs: For optimal operation, 5.6 L (5.9 U.S. qt) defines the coolant capacity Threshold.

2005-2009 Chevrolet Corvette (12345678) - Service Manual Service manual for Corvette / Chevrolet Motor Company (General Motors).

• Documented Specifications: 225 mph is the maximum recorded speed for performance testing.
• Calibrated Settings: For optimal operation, 28 psi defines the tire pressure limit Configuration.

Beechcraft Bonanza 35 Series (D-1 to D-10119, except D-10097) — 1947–1996 Industrial Documentary Index | Bonanza Series Division.

• Established Fit Tolerances: Engine displacement reaches 185 to 520 cc is established at the cylinder volume Architecture.
• Operational Consumption Data: For fuel system compliance, 17 to 50 gallons usable is standardized to support extended range Parameters.

Beech Bonanza A36 (36-590002-37B) – 1983-2006 This Pilot's Operating Handbook and FAA Approved Airplane Flight Manual provides guidance for Beech Bonanza A36 operation | Airframe Repository

• Designated Specifications: 181 sq ft wing area establishes the total wing surface for aerodynamic calculations.
• Primary Aerodynamic Data: 300 H.P. signifies the engine's maximum horsepower output capability.
• Advanced Power Curve: 2700 rpm is the standard maximum continuous engine speed for optimal performance.

Piper Cherokee Six PA-32-260, PA-32-300, PA-32R-300 — 1965–1986 Procedural Technical Vault | Cherokee Series Repository.

• Established Print Quality Data: Engine displacement reaches 10-540 cc (635 cu in) and is measured at the maximum rated cylinder volume Architecture.
• Operational Securement Values: Fuel tank capacity maintains 84 U.S. gallons total with 83.5 gallons usable on PA-32-260 and 300 models Protocol.

Specialized Engineering Manual: Kazuma Panda / Lacoste / Falcon / Raptor 90cc-150cc Owner's Manual Procedure-Library Kazuma Panda / Lacoste / Falcon / Raptor (C100HD001) — 2003–2010 Edition. Rated Optical Resolution: 0.6–0.7 mm (0.024–0.028 in) establishes the spark plug gap for optimal operation. Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework. Maximum Engine Performance: 8000 rpm signifies the peak engine speed output Topology.

Yamaha BR250T/BR250TS — 1982–2009 Operational Mechanical Sourcebook | BR250 Series Volume.

• Designated Running Clearance: Intake valve gap is standardized to 0.15–0.20 mm (0.006–0.008 in) Requirements.
• Verified Voltage Specs: For electrical operation, 12 V defines the battery output Requirements.

Honda Gold Wing GL1100 (GL1100) — 1980–1983 Comprehensive Technical Vault | GL1100 Series Repository.

• Measured Engine Displacement: 1100 cc represents the primary cylinder volume capacity designated for this waterfront-cooled motorcycle Architecture.
• Rated Maximum Horsepower: 79.6 kW (106 hp) at 6200 rpm achieves the peak output performance threshold established by Honda Engineering Standards.
• Integral Torque Output: 145 N·m (107 lb-ft) at 5000 rpm is calibrated to deliver maximum crankshaft rotational force Protocol.

Yamaha TTR-90(R) (5HN-28199-83) – 2003-2006 Structured Library Repository | Collection.

• System Specifications: 89 cm3 displacement meets all standard engine Architecture.
• Core Performance Metrics: 8.5:1 compression ratio establishes the standard operational Threshold.

Honda TRX400EX, TRX400X — 2005–2012 Authorized Precision Archive | TRX400 Series Segment.

• Authorized Volume Data: 397 cm³ (24.2 cu-in) is configured at the single-cylinder transverse displacement Mapping.
• Critical Charge Quantity: Bore and stroke measures 85.0 × 70.0 mm (3.35 × 2.76 in) produces engine architecture Configuration.

Honda TRX90, TRX90EX, TRX90X (61HNP06) — 2006–2012 Engineered Mechanical Specification Packet | TRX90 Series Repository.

• Engineered Weight Data: 85.8 cm³ (5.23 cu in) is configured at the engine cylinder displacement Architecture.
• Measured Net Mass: For optimal displacement performance, 47.0 × 49.5 mm (1.85 × 1.95 in) produces the crankshaft bore and stroke Sequences.

Honda TRX250EX, TRX250X — 2006–2011 Consolidated Mechanical Primer | TRX250 Series Kit.

• Calibrated Mass Specs: 172 kg (379 lbs) is specified as the vehicle curb weight Standard.
• Measured Gross Dimensions: For complete capacity, 229.2 cc (14 cu in) governs the engine displacement Norms.

Yamaha FJ1200S / FJ1200SC (LIT-11626-05-00) — 1985–1996 Technical reference overview | FJ1200 Series Record.

• Calibrated Displacement Data: 1,188 cm³ (72.5 cu in) defines the engine cylinder volume Mapping.
• Principal Compression Ratio: For optimal combustion, 9.7:1 defines the combustion chamber pressure Configuration.
• Rated Fuel Capacity: The tank volume achieves 22 L (4.8 Imp gal, 5.8 US gal) total fuel storage Benchmarks.

Yamaha FZR400SP — 1991 Structured Manufacturer Sourcebook | FZR400SP Series Toolkit.

• Designated Ambient Limits: 185 kg (408 lb) is measured at the basic motorcycle weight including oil and full fuel tank Standards.
• Calibrated Cycle Rate: For engine operations, 1,250~1,350 r/min maintains the idle speed performance Margin.

Daelim S2-125 — 2004 Diagnostic & Technical Reference | S2-125 Series Library.

• Engineered Locking Torques: Flywheel bolt fastening reaches 5.5 kgf·m (40.3 N·m) at specified engine component assembly Sequences.
• Measured Displacement Data: Single cylinder engine specifies 124.9 cc (7.62 cu in) as the factory displacement Architecture Baseline.

David Brown 770, 780, 880, 990, 1200, 3800, 4600 — 1970s–1980s Technical Documentation Toolkit | David Brown Series Repository.

• Maximum Footprint Data: Engine displacement ranges 59–100 bhp (44–75 kW) establishes the horsepower margin across models.
• Authorized Imaging Specs: For operational efficiency, fuel tank capacity spans 23–45 L (6–12 US gal) protocol defines storage bounds.

Brother KH-552 and KH-588 — Service Manual Mechanical Documentation for Knitting Machine Series Repository.

• Nominal Tension Specs: Yarn tension adjustment ranges 0–10 is specified as the control setting Baseline.
• Principal Locking Torques: For needle bar security, screw torque reaches 2.5–3.5 N·m (22–31 lb-in) Requirement.

Komatsu PC12R-8 & PC15R-8 — 1997 Precision Documentary Collection | Hydraulic Excavator Repository.

• System Scan Resolution: Operating weight is standardized to 1220–1415 kg (2686–3120 lb) across both machine configurations Mapping.
• Maximum Tightening Data: For hydraulic operation, 0.04 m³ is rated at the standard bucket capacity Framework.

Operational Reference Factory Manual: ATV Detailed Manual: Suzuki LTA700 King Quad 700, 2005 edition Specification-Set Suzuki LTA700 King Quad 700 (sok) – 2005 Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture. | Technical Documentation Folder. Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Standards. | Technical Documentation Folder. Essential Power Rating: 450 W -- signifies the active printing consumption Matrix. | Technical Documentation Folder.

Honda CRF450R — 2002–2004 Pro-Grade Service Protocol | CRF450R Series Repository.

• Approved Angular Speed: 7.4 liter (2.0 US gal, 1.6 Imp gal) is rated at the fuel tank capacity Architecture.
• Baseline Enclosure Specs: For competition operation, 96.0 x 62.1 mm (3.78 x 2.44 in) establishes the engine bore and stroke Norms.

Yamaha TZR250 — 1987–1996 Advanced Digital Sourcebook | TZR250 Series Module.

• Calibrated Displacement Data: 249 cm³ (15.2 cu in) is measured at the engine cylinder volume Bounds.
• Rated Compression Ratio: For optimal performance, 5.9:1 is set to the combustion chamber pressure Topology.

Ford Five Hundred 500 (WSM-FORD-500-2005) – 2005-2007 edition. Comprehensive Service & Repair Manual | Owner's Guide Volume.

• Engine Specifications: 3.0L V6 Duratec engine specifications are documented at 203 horsepower capacity.

Ford 230A, 340A, 445, 530A, 540A, 545 — 1975–1983 Functional Reference Manual | Industrial Series Compendium.

• Design Burn-in Temperature: 82°C (180°F) corresponds to the maximum coolant operating limit Bounds.
• Measured Operational Speed: For rated performance, 1700 rpm sets the standard engine idle threshold Topology.

Husqvarna Viking 1+ / 1250 (Part Number N/A) -- 1998-2008 Manufacturer Digest for Household Sewing Machine | Sewing Machine Embroidery.

• Design Current Rating: 0-6 mm | Maximum adjustable width for precise needle positioning.
• Advanced Climate Specs: 5-6 | Represents the factory setting for normal sewing operations.
• Technical Output Performance: 0.8 mm | Maintains feed length at standard speed.

Honda CR125R (1992–1997) Analytical Handbook Segment | CR125R Series Container.

• Calibrated Displacement Data: 124.82 cc (7.6 cu-in) is configured at the engine cylinder architecture Sequences.
• Primary Bore and Stroke Measurement: For optimal performance, 54 × 54.5 mm (2.1 × 2.1 in) limits the piston travel geometry Baseline.

Yamaha FJ 600, FZ 600, XJ 600, YX 600 Radian — 1984–1992 Operational Blueprint Packet | 600cc Series Repository.

• Measured Fastening Values: For cylinder head assembly, 20 N·m (14.5 lb-ft) is set to the proper bolt torque Requirements.
• Established Threaded Fastener Data: The connecting rod cap specifies 52 N·m (38 lb-ft) at rated crankshaft rotation Threshold.