2004 Polaris MSX

Polaris MSX110 / MSX150 Owner's Manual

• Maximum Enclosure Specs: 48.3 in. width establishes the overall exterior dimensions.

2004 Polaris Predator 50, Predator 90, Sportsman 90 (PN 9918778 Rev. 02)

Polaris Youth ATVs Manual | Owner's Volume.

• Rider Capacity: 1 Rider maximum, with a weight limit of 90 lbs. for the Predator 50.
• Engine Displacement: 49cc for the Predator 50, and 89cc for the Predator 90/Sportsman 90 models.
• Fuel Capacity: 1 gallon (3.8 liters) for the Predator 50, and 1.3 gallons (5 liters) for the Predator 90/Sportsman 90.

2009 Polaris Sportsman 800 EFI Service Manual: Polaris Master Service Manual for Polaris Sportsman 800 EFI (2009) – 386 Pages | Shop Standards Knowledge-Base

Polaris Sportsman 800 EFI (2009) | Series: A09MN76AX / A09MN76AZ Engine Specifications: EH076OLE Parallel Twin | Displacement: 760cc | Compression Pressure: 150-200 psi | Engine Idle Speed: 1150 ± 100 RPM | Fuel Capacity: 4.13 gal (15.6 L) | Alternator Output: 500 w @ 6000 RPM

2009 Polaris ATV Service Manual - Predator 50, Outlaw 90 & Sportsman 90 ATV Maintenance Manual - 2009 Edition Maintenance-Registry

Official Polaris Predator 50, Outlaw 90 & Sportsman 90 ATV Maintenance Manual - 2009 Edition. Technical-Scope: General Vehicle Inspection and Maintenance | Validation-Data: Standard Torque Specifications / Technical-Scope: Engine Lubrication.

• Verified Holding Capacity: 30 oz. / 900 ml indicates the engine oil capacity requirements.
• Engineered Measurement Bounds: 17.5° BTDC @ 1700 RPM sets the ignition timing parameters.

Polaris IQ Snowmobile Service Manual: 2007-2008 Repository

This manual provides comprehensive coverage for the Polaris IQ Snowmobile models from 2007-2008.

• Technical Resolution Data: 8100 RPM establishes the maximum operating speed for the engine.
• Specific Temperature Range: For optimal operation, -35°C defines the environmental limit Framework.

2003 Polaris 340 CLASSIC, 500 CLASSIC, 550 CLASSIC, 600 CLASSIC, 700 CLASSIC (9918049)

This comprehensive service manual provides extensive information for the 2003 Polaris Trail Luxury Snowmobile series. | Official Polaris Documentation.

• General Information Category: 116 pages covering specifications, maintenance, and engine data.
• Maintenance and Tune Up Category: 57 pages detailing routine servicing, adjustments, and inspections.
• Engine Category: 159 pages dedicated to engine disassembly, assembly, and troubleshooting.

2007 Polaris Sportsman 700 EFI, Sportsman 800 EFI Service Manual

This manual covers the 2007 Polaris Sportsman 700 EFI and Sportsman 800 EFI models. It is designed to provide comprehensive repair and maintenance information for these vehicles.

• System Tolerance Values: 5 psi establishes the recommended tire pressure for both front and rear tires.

2001 Polaris Service Manual: All 500cc-800cc XC SP, RMK, Edge Pro X, and XCR Models Library-Master

Polaris 2001 High Performance Snowmobile Service Manual | XC SP, RMK, Edge Pro X, XCR Models.

• Technical Resolution Data: 438 cc engine displacement provides reliable power for various models.
• Specific Temperature Range: Carburetors calibrated for -20°F to +40°F ambient temperatures.
• Essential Power Rating: Engines range from 500cc to 800cc, offering robust performance.

2004 Polaris Freedom / Virage / Virage i / Genesis i / MSX 140 Personal Watercraft (PWC) Service Manual

This manual provides comprehensive service and repair procedures for the 2004 Polaris Freedom, Virage, Virage i, Genesis i, and MSX 140 Personal Watercraft.

• Engine Specifications: Features detailed engine data, including bore, stroke, displacement, and compression ratios for all models.
• Fuel System: Explains fuel delivery, idle speed settings, and carburetor adjustments for optimal performance.
• Cooling System: Details cooling system maintenance, flushing procedures, and thermostat operation.

2004 Polaris PRO X Snowmobile Service Manual

Complete service and repair documentation for 2004 Polaris 440 PRO XR, 550 PRO X, 600 PRO X (X2), 700 PRO X (X2), 800 PRO X (X2, XR) snowmobiles. Technical-Library | Binder.

• Nominal Tolerance Values: 165#/in for stock IFS spring rates ensures proper suspension performance.
• Principal Interference Fit: 2.0” / 5cm provides the IFS spring pre-load for the 440 PRO XR, optimizing front suspension response.

2001 Polaris Scrambler 500 ATV Service Manual

Service and Repair Documentation | Manufacturer Bundle

• Maximum Play Limits: 1200 RPM is the standard idle speed Specification.

2014 Polaris RZR XP 1000 Service Manual

Complete Repair and Maintenance Guide | OEM-Documentation

• Factory Engine Specifications: 999cc DOHC Twin Cylinder engine provides robust power for all terrains.
• Essential Drivetrain Data: Automatic PVT transmission with P/H/L/N/R shift types ensures optimal gear selection.

Expert Diagnostic Parts Manual: Honda CB1000P Motorcycle Shop Manual, 1993-1998 models Maintenance-Registry

Honda CB1000P (1993-1998) (Super Four) (33456) | Definitive Portfolio.

• Reference Deviation Limits: 25 Nm is set to ensure proper assembly torque values.
• Approved Energy Draw: For efficient operation, 15.5A reaches the maximum electrical current draw.
• Designated Environmental Range: For optimal performance, 68°F/20°C is standardized to maintain consistent engine temperatures.

Honda CB125, CB175, CL125, CL175 Shop Manual: 1967-1973 Models

Honda CB125, CB175, CL125, CL175 (Part Number: 6230401) -- 1967-1973 Service Manual | Honda Motor Company Series.

• Maximum Twist Specifications: 10.1 Nm establishes the standard torque for various fasteners Architecture.

Enhanced Training Technical Manual: Honda CB350F / CB400F Four (honcb400f7577) – 1975-1978 System-Standards

Technical Documentation & Specification Packet | Series Honda Manual. Container Packet.

• Authorized Deviation Limits: 1.0-1.5 mm defines the permissible wear on the drive chain. Sequences.
• Critical Energy Draw: 12V 2AH establishes the standard battery capacity Baseline. Requirements.

Honda CH250 Elite (07936-KM10000) Manual: 1985-1988 PDF Documentation-Set

Expert Overview | Honda Motor Corporation Ltd Bundle.

• Established Electrical Load: For battery capacity, 10 – 14 AH specifies the standard charging requirement.
• Operational Climate Parameters: The spark plug gap is established at 0.8 – 0.9 mm (0.031 – 0.035 in) for optimal combustion.
• Essential Velocity Specs: For extended high-speed riding, X22EPR-U9 dictates the required spark plug type.

Detailed Installation Assembly Manual: Honda VF500C V30 Magna Service Manual: 1984-1985

Honda VF500C (V30 Magna) (61M-J801) -- 1984-1985 Factory Briefing & Blueprint File.

• Factory Storage Capacity: 3.5 liters (3.3 US qt, 2.9 Imp qt) defines the engine oil capacity Requirements.
• Functional Tolerance Values: For optimal operation, 0.20 mm establishes the maximum rotor tip clearance Benchmarks.

Honda XR75 / XR80 (HOC7580SM) -- 1973-1983 Service Manual | Series Shop Manual File.

• Authorized Reservoir Specs: 1.0 lit. coolant establishes the fluid capacity for the cooling system.
• Critical Displacement Data: For engine operation, 72 cc defines the total volume displaced by the pistons.
• Operational Dimensional Tolerance: 0.05 mm is the standard for valve tappet clearance.

Honda CT70 / CT70H / CT70K1 / CT70HK1 (HC 37507) - 1969-1982

This is a Parts Catalog | Reference Collection Packet.

• Measured Storage Capacity: 12 cubic inches is configured at the rear for user accessibility.
• Fundamental Tolerance Values: +/- 0.5mm limits the deviation for critical component measurements.
• Baseline Consumption Data: 2 gallons represents the standard fuel tank capacity.

Komatsu Hydraulic Excavator Shop Manual: PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, PC250LC-6 (1996)

This manual provides in-depth coverage for your hydraulic excavators.

• Operational Specs: 19,900 kg is the standard operating weight for the PC200-6 model.
• Maximum Digging Reach: 9,875 mm indicates the maximum reach for the PC210LC-6 configuration.
• Bucket Capacity: 0.8 m³ is the specified capacity for all listed models.

Nissan Maxima A32 (RE4F04A) Manual: 1997 edition Engine-Compendium

Nissan Maxima A32 / Nissan Motor Corporation, Ltd (RE4F04A) | Automatic Transaxle Division.

• Prescribed Ambient Limits: 15-30C defines the environmental limit Margin.
• Standard Cycle Rate: 1200 dpi establishes the maximum print output Protocol.
• Maximum Size Parameters: For optimal operation, 64 MB for standard operation Architecture.

• Ferguson TE20 (TE20) — 1946–1956 Standard Technical Repository | TE20, TEA20, TED20, TEF20, TER20, TEH20 Series (Service Logic Archive).

• Advanced Parameter: Mechanical alignment establishes the baseline for the Ferguson TE20 internal combustion logic.

• Technical Interface: System architecture defines the relationship between the transmission gears and the drive-line framework.

Ferrari 456 Series Ferrari 456, 456GT, 456GTA (Type F116) — 1992–1997

• imagePROGRAF iPF8000 (2006)

V92 diesel engine 6V, 8V, 12V, 16V / Detroit Diesel Corporation

• 6V92TA
• 8V92TA
• 12V92TA

• 12 hp (1971-1986)
• 15 hp (1971-1986)
• 18 hp (1971-1986)
• 20 hp (1971-1986)
• 25 hp (1971-1986)

• John Deere 240 (2003)
• John Deere 250 (2003)

• New Holland T4.105 (47535496) — 2014-2018 Range Documentation Vault :: T4.55, T4.65, T4.75, T4.85, T4.95, T4.105, T4.115 Tier 4A Series (Service Repository).

• Advanced Configuration: 1,058 pages establishes the comprehensive scope of the technical archive.

• Essential Capacity: 114 liters must be maintained within the fuel tank to ensure continuous operation.

Isuzu Motors Ltd

• Isuzu Trooper (1998-2002)
• Holden Jackaroo (1998-2005)
• Isuzu UX (1998-2002)

ES 300 / Lexus

Serial numbers:

• For 1992 models: JT8VK13T9N0****
• For 1993 models: JT8VK13T2P0****

• 1997-2001 Lexus ES 300

Montana / General Motors

2005 Pontiac Montana

• Montana SV6 Base
• Montana SV6 1SB

• 898450 89845
• 898451 89845
• 898452 89845
• 898454 898461
• 898455 89853

Mercury Mercruiser Marine Engine Number 23

• GM V-8 454 CID (7.4L)
• GM V-8 502 CID (8.2L)

• Suzuki RMZ450 2005-2007

Engine: 449.0 cc, 4-stroke, liquid-cooled, DOHC, 4-valve, Double Overhead Cams/Twin Cam (DOHC)

• Arctic Cat 250 (2003)
• Arctic Cat 300 (2003)
• Arctic Cat 400 (2003)
• Arctic Cat 500 (2003)

Hitachi Ltd Corporation EX60-5 / EX60LC-5 Hydraulic Excavator Technical and Workshop Manual 1987-1997 Parts-Reference

Hitachi Ltd Corporation EX60-5, EX60LC-5 Hydraulic Excavator Workshop Manual | Series Archive Folder.

Technical Specifications:

Strategic Shop Electrical Manual: Tractor Official International Farmall M, MD, 6 Series & Related Tractors - Diagnostic, Maintenance & Repair Handbook Hydraulic-Guide

John Deere 5220, 5320, 5420, 5520 Tractor (TM2048) – 2002

Covers transmission, hydraulics, and electrical systems. | Official Complete Tractor Workshop Manual.

• Fundamental Engine Specifications: 40 kW signifies the maximum engine output for the 5220/5320.
• Specific Transmission Gear Ratios: For forward gears, 12 gears indicates the transmission capability.
• Critical Hydraulic System Pressure: For optimal operation, 19,695 kPa controls the hydraulic system's maximum working pressure.

Detailed Repair Overhaul Manual: Chrysler Town & Country LX / LXi manual, 1996-00 edition, PDF Wiring-Compendium

Model-Designation: 1996-2000 Town & Country LX / LXi // Specification-Class: Service / Repair // Model-Designation: Automotive

Epson Pro 7880/9880 Field Repair Guide 2007 Essential Maintenance & Service Procedures Repository

Epson Pro 7880/9880 (2007) -- Field Repair Guide. Technical reference for Epson Pro 7880/9880 printers. Details component replacement, troubleshooting, and operational adjustments. PN: 2117093 / 2117078.

• Design Cooling Capacity: For optimal operation, 18 ppm defines the maximum print output Threshold.

Iveco Daily 29L, 35S, 35C, 40C, 45C, 50C, 60C, 65C (Commercial Vehicles) - Comprehensive Mechanical & Electric/Electronic Repair Manual 2004-2005 Engineering-Archive

Covers Iveco Daily 29L, 35S, 35C, 40C, 45C, 50C, 60C, 65C (Commercial Vehicles) with Mechanical & Electric/Electronic repair procedures. Ref: 603.93.281 | Series-Validation Commercial Vehicles. Published Category: 167.43 MB Digital Archive | Specific Engine Data: 4-Cylinder Diesel | Integral Component Locations: Identified Across 177 Pages | Operational Systems Coverage: Mechanical, Electrical, Electronic, and Bodywork | Fundamental Maintenance Procedures: Scheduled Maintenance and Troubleshooting | Universal Diagnostic Protocols: Fault Finding and Component Testing

JCB 8013, 8015, 8017, 8018 Mini Excavators (9803/3105) - 2004-2007

A Manufacturer Compendium Digest | Section

• Authorized Power Framework: 12 VDC is set to provide essential power requirements.
• Critical Operating Temps: For optimal operation, 15-30C defines the environmental limit Threshold.
• Operational Cycle Rate: For optimal operation, 15-30C defines the environmental limit Threshold.

Komatsu D68E-1 / D68E-1A / D68P-1A / D68P-1 / B1001 / 45590 (SEBMU1440102) Workshop Manual - Maintenance, Diagnostics & Repair Procedures System-Standards

Diagnostic Documentation & Specification Collection | Series Illustrated Manual.

• Core Data: The engine assembly requires 1,500 kg for standard operation Logic.

1980-1994 Hyster Alternator Service Repair Manual

Covers Delco, Motorola, and Leece-Neville alternators used on Hyster lift trucks.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.
• Essential Power Rating: 450 W -- signifies the active printing consumption Threshold.

Yamaha IT490(L) / IT250(L) (29V-28199-70) -- 1984 Operational Collection | Series Set.

• Authorized Scan Resolution: 0.7-0.8 mm establishes the gap for the IT490 spark plug Baseline.
• Critical Tightening Data: For proper assembly, 20 Nm signifies the torque for the spark plug Specification.
• Operational Electrical Specs: The ignition timing is set to 2.0 mm before Top Dead Center Mapping.

Husaberg FC 550/4, FE 550e/6, FS 550/4 (800.11.075.150) - 2004 Service Manual | Motorcycle Archive.

• General Specifications Data: 550 cm3 establishes the engine displacement capacity.
• Specific Engine Details: 100 / 70 mm denotes the bore and stroke dimensions Framework.

Mercury Outboard Motors (90-817643R1) - 1996

Precision Service & Repair for Classic Outboards

Covers 45 Jet, 50, 55 Marathon, 55 SeaPro, 60, 60 Big Foot, 60 Marathon, 60 SeaPro models. Comprehensive diagrams and specifications. Package: Resource

• Engineered Specifications: 51.8 cu. in. (849cc) displacement defines the total volume for engine operation.
• Defined Performance Metrics: 675

Yamaha MT-03 (2006-2012) Service Manual

This manual provides comprehensive service information for the Yamaha MT-03, covering 2006 through 2012 models. It includes detailed procedures, diagrams, and specifications necessary for maintenance and repair.

• Designated Engine Specs: Displacement: 660 cm3 (40.27 cu·in) defines the engine's power output.

John Deere 322 / 330 / 332 / 430 (TM1591) – 1984-1992

Technical Manual | Tractor Operations and Specifications

• Designated Unit Dimensions: 1.2 m (46 in.) Wheel Base establishes the tractor's fundamental size Blueprint.
• Primary Unit Dimensions: For overall operational stability, 1.8 m (69.5 in.) Overall Length is configured at optimal performance parameters.
• Advanced Unit Dimensions: The tractor's overall stability requires 1.1 m (44.5 in.) Overall Height Standards.