Jaguar XK8 Sports Coupe & Convertible — 1996–2001 Engineering Consolidated Licensed Compendium | XK8 Series Segment.

• System Holding Capacity: 40 kilohertz — defines the occupancy sensor ultrasonic operating frequency Mapping.
• Maximum Measurement Bounds: The upper steering column requires 3.3 kN for collision protection crush load Logic.

Chevrolet Corvette — 1993 Industrial Briefing for Overview Set.

• Designated Wattage Specs: The fuel tank capacity is calibrated to 20.0 US Gallons (75.7 L) establishing the primary fuel storage Requirements.
• Primary Generation Capacity: The cooling system supports 17.8 quarts (16.9 L) for the LT1 engine configuration Threshold.

Chevrolet Corvette Coupe, Convertible, and ZR-1 (10242165 B) — 1995 Automotive Engineering Archive | Corvette Series Bundle.

• Approved Output Performance: 350 cu in (5.7L) engine displacement is designed for maximum V8 engine capacity Bounds.
• Baseline Linear Velocity: For optimal highway cruising, the LT5 engine delivers 11.0:1 compression ratio Topology.

Chevrolet Camaro — 1997 Procedural Technical Reference for Camaro Unit.

• Maximum Twist Specifications: 100 lb-ft (140 N·m) is rated at the wheel nut fastening requirement Architecture.
• Authorized Capacity Limits: For cooling system operation, 15.3 quarts (14.5 L) provides the maximum engine coolant volume Norms.

Land Rover Ninety and Defender 90/110 — 1984–1990 Systematic Registry Primer | Ninety Series Package.

• Nominal Installation Footprint: 3528 cc (215 cu in) is configured at the engine cylinder volume Benchmarks.
• Prescribed Maximum Resolution: For optimal performance, 84.6 kW (113 bhp) is established at 4000 rpm Range.

Chevrolet Camaro (1995) — 1995 Professional Reference Archive | Camaro Series Folder.

• Approved Deviation Limits: 3.4L displacement reaches 207 cubic inches (3.4L) is designed for standard engine architecture Architecture.

Chevrolet Camaro, Pontiac Firebird (98CAM/FIR001) — 1998 Certified Documentary Sourcebook | Camaro/Firebird Series Set.

• Calibrated Horsepower Data: The V6 engine achieves 200 hp at 5200 rpm is specified as the baseline power output Mapping.
• Core Power Performance: For the V8 305 engine, 305 hp at 5200 rpm supports maximum performance acceleration Configuration.

Pontiac Firebird (Part No. 10254416 A) — 1995 Licensed Strategic Sourcebook | Firebird Series Library.

• Nominal Footprint Data: 207 cu in (3.4L) is set to as the baseline displacement Architecture for the Code S engine configuration.
• Principal Imaging Specs: For optimal performance, 9.0:1 compression ratio reaches the standard cylinder pressure requirement Benchmarks.

Chevrolet Cavalier (Coupe, Sedan, Convertible) — 1998 Industrial Documentary Repository | Cavalier Series Collection.

• Verified Alignment Specs: 2.2L engine displacement is established at 2189 cc (133.6 cu in) maximum cylinder volume Matrix.
• Key Wattage Specs: For optimal performance, 115 horsepower at 5000 rpm yields maximum rated engine output Standards.

Porsche 911 Carrera Coupe, Targa, Cabriolet, 930/21 & 930/25 — 1984–1989 Original Certified Documentary Archive | 911 Carrera Series Repository.

• Designated Output Rating: 200 hp at 6200 rpm is set to the maximum power specification for 1984–1986 model engines as referenced in Mapping.

BMW 3 Series E36 (M3, 318i, 323i, 325i, 328i) — 1992–1998 Mechanical Digest Sourcebook | 3 Series Kit.

• Verified Rotational Force: The M44 engine is rated at 103 hp at 6000 rpm as a maximum power Architecture.
• Key Storage Capacity: For optimal fuel management, the engine displacement reaches 2.8 L (170.4 cu in) on the M52 engine Norms.

Mercedes-Benz CLK-Class Cabriolet (208 584 29 83) — 2002

CLK 320, CLK 430, CLK 55 AMG Convertible / Coupe

Vehicle Features Overview | Standard Collection

• Nominal Engine Displacement: 3.2 L V6 specifies the standard engine configuration.
• Prescribed Tire Pressure: 32 psi is the recommended cold tire inflation pressure.

2007 Mercedes-Benz CLK-Class Cabriolet (209 584 52 96 USA Edition A) – 2007

Covers CLK 350 / CLK 550 / CLK 63 AMG.

• General System Volume: 5.41 ft³ establishes the maximum trunk capacity.
• Defined Spacing Data: For driver comfort, 25 cm clearance establishes the minimum distance to the airbag cover.
• Key Wattage Specs: The vehicle systems require 12 V for optimal operation.

Harley-Davidson Dyna Super Glide, Low Rider, Wide Glide, Sturgis & Convertible (99501-06) -- 1991-1998 Original Registry for Dyna Models | Packet.

• Service Specifications: 100 Nm torque capacity is specified for the domestic model at crank Operation.
• Engine Cooling Data: The 4-cycle cooling system is a 60°, liquid cooled V-twin Configuration.
• Oil Capacity Information: For optimal operation, 4.3 liters defines the engine oil and filter capacity Baseline.

BMW E46 323i, 325i, 325xi, 328i, 330i, 330xi (1999-2005) Service Manual

Documents service procedures for BMW E46 models—including 323i, 325i, 325xi, 328i, 330i, and 330xi from 1999-2005. PN 11-00-8-123-130. Manufacturer Repository | Kit

• Prescribed Tension Specs: 10 Nm is the calibrated torque for the secondary chain guide to cylinder head Protocol.
• Standard Locking Torques: 30 Nm is the rated torque for the cylinder head to engine block Stage 1 Norms.

BMW 3 Series Service Manual and Technical Guide (1984-1990)

318i, 325, 325e, 325es, 325i, 325is, and 325i Convertible | Bentley Publishers File

• Technical Data: Includes detailed engine specifications for 4-cylinder and 6-cylinder engines, covering bore, stroke, displacement, compression ratio, horsepower, and torque figures.
• Ignition System: Covers Transistorized Coil Ignition (TCI-i) and Motronic (DME) systems, including testing, maintenance, and troubleshooting of distributor, coil, spark plugs, and related components.

Jaguar XJS (1992)

Precision Maintenance & Diagnostics Master Manual | 1992 edition Package

• Designated Tension Specs: 115 Nm establishes the required tension for critical fasteners in engine and transmission assemblies.
• Primary Locking Torques: For optimal operation, 55-75 Nm defines the torque for body structural components and suspension mounts.
• Advanced Displacement Data: The V12 engine requires 70 mm x 78.5 mm for bore/stroke to achieve its power output.

Mercedes SLK 230 Kompressor (2000-2004) & SLK 320 (2001-2004) Comprehensive Operator’s Manual | Mercedes-Benz SLK Series Kit.

• Design Specification: 10,000 miles establishes the recommended service interval for SLK 230 Kompressor.
• Advanced System Fill: For routine checks, 2.1 US qt (2.0 l) signifies the engine oil capacity.
• Technical Reference: 15.8 US gal (60.0 l) -- represents the total fuel tank capacity for both models.

3-Series E30 1983 to 1991 (316, 316i, 318i, 320i, 325i, incl. Touring and Convertible versions) 5-Series E28 1981 to 1988 (518i, 525i, 528i, 535i, M535i) 5-Series E34 1988 to 1991 (518i, 520i, 525i, 530i, 535i)

Important Note: The manual does not cover Diesel, DOHC, or V8 engines, or four-wheel-drive models.