Search Results for: alfa romeo 156 manual (4,867 results)

Yamaha RS90, RS90R, RSG90, RS90M, RST90, RST90TF Series (8ES1–8FM2) — 2005–2008 Comprehensive Technical Reference | RS Series Engine Architecture.

• Certified Power Rating: 84.7 kW (115.2 PS) at 8,500 r/min is established at the maximum horsepower output Bounds.
• General Displacement Data: For optimal engine efficiency, 973 cc (59.37 cu in) yields the liquid-cooled 4-stroke DOHC engine volume Topology.

Volvo Penta TAMD61A - TAMD72WJ-A (7735718-4) – Marine Diesel Engine Service Manual

Repair Manual for Volvo Penta Marine Diesel Engines | Covers TAMD61A, TAMD62A, TAMD63L-A, TAMD63P-A, TAMD71A, TAMD71B, TAMD72A, TAMD72WJ-A, TAMD72P-A | 512 Pages | PDF Download

• Engine Type: Marine Diesel

BMW R 1150 GS (00 71 0 008 851) – 1999-2003 Covers R 1150 GS / BMW Bayerische Motoren Werke AG motorcycles.

• Published Specifications: 1130 cc engine displacement corresponds to the standard configuration.
• Measured Tolerances: For valve clearances, 0.15 mm (inlet) and 0.30 mm (exhaust) define the permissible cold settings.
• Integral Performance Data: 85.0 HP (62.0 kW) @ 6800 RPM signifies the maximum power output Architecture.

Hyosung RT 125 Karion (99000-94610) — 2002–2007 Reference Specification Registry Reference. Series Hyosung Record.

• Calibrated Print Rate: 124.5 cc signifies the engine displacement Architecture.
• Rated Dimensional Limits: For optimal operation, 230 mm defines the ground clearance Norms.
• Published DPI Rating: 47 indicates the steering angle in degrees Bounds.

KTM 400 / 620 LC4 / LC4e (None) — 1997 Comprehensive Resource | LC4 Series Compendium.

• Factory Tolerance Data: Kurbelzapfenschlag is calibrated to 0.04 mm maximum for crankpin runout verification Mapping.
• Specific Dimensional Tolerance: For optimal assembly, 0.12 mm establishes the maximum piston-to-cylinder clearance Protocol.
• Primary Generation Capacity: The charging system outputs 12V 130W to maintain battery power Architecture.

Reference-Grade Reference Wiring Manual: KYMCO 1999 People 50 Service Manual (192 P.) Library-Master

KYMCO People 50 (BA10AB.AC) — 1999 | Technical Service Vault | PEOPLE 50 Series Repository.

• System Wattage Specs: 49.5 cc is designed for the single-cylinder 2-stroke engine displacement Bounds.

Arctic Cat Prowler 650, Prowler XT 650 — 2008 Operational Vault for Blueprint | Prowler Packet.

• Nominal Bolt Torques: Engine mounting fasteners establish 40 ft-lb (54 N·m) for secure cradle attachment Mapping.
• Principal Volume Data: Fuel tank capacity produces 31 L (8.2 U.S. gal.) storage specification Configuration.

Cagiva River 600 (Part Number 8000 79525) — 1995 Professional Technical Archive | River 600 Service Repository.

• Engineered Displacement Data: 599 cc represents the engine cylinder volume Assembly.
• Calibrated Power Output: For peak performance, 58 hp at rated engine speed signifies maximum rated horsepower Load Capacity.

Arctic Cat Tigershark, Monte Carlo, Montego & Daytona — 1993–1996 Diagnostic Manufacturer Resource | Tigershark Series Library.

• Factory Play Limits: For maximum engine performance, 787 cc is configured at the standard displacement Requirements.
• Essential Electrical Specs: The charging system produces 32 amp-hour capacity Threshold.

Practical Reference Field Manual: Suzuki Wagon-R manual - 2001 PDF Maintenance-Registry Suzuki Wagon-R / Suzuki Motor Corporation - 2001 Suzuki Wagon-R GA, GL, GL (Special), Wagon-R+ GL, Wagon-R+ GL (Aircon), Wagon-R+ GX, Wagon-R GS Limited. Nominal Output Rating: 75 BHP is the peak engine performance specification. Principal Cooling Specs: 3.6 liters signifies the total engine oil capacity Framework. Rated Print Rate: 1.3 Liter establishes the engine displacement metric.

Sea-Doo 5803, 5810 (GT) — 1990 Digital Reference Specification | Bombardier Watercraft Database.

• Designated Interference Fit: 76.0 mm (2.992 in) is configured at the standard bore diameter for the Rotax 587 engine Sequences.
• Primary Circuit Specs: For optimal ignition performance, the CDI 4/5 p system produces 160 W output at 5500 RPM Baseline.

Bombardier Sea-Doo 1995 SP, SPI, SPX, GTS, GTX, XP (5873, 5875, 5874, 5815, 5863, 5857) — 1995 Technical Mechanical Overview | Sea-Doo Watercraft Engineering Blueprint.

• Integral Displacement Data: Engine displacement reaches 580.7–650 cm³ (35.4–39.67 in³) establishing the cylinder volume Play Limits.
• Measured Power Output: For optimal performance, 106–109 hp at 6200 rpm specifies the maximum rated horsepower Electrical Specs.

Sea-Doo 4-TEC GTI, GTX, RXP, RXT — 2006 Comprehensive Technical Briefing | 4-TEC Series Packet.

• Documented Amperage Specs: The fuel pump circuit is standardized to 12 V maximum electrical output Sequences.
• Technical Thermal Envelope: Engine operating temperature is rated at 87°C (188°F) thermostat opening threshold Baseline.

Sea-Doo Sportster 1800, Challenger 1800 (5613/5618/5633, 5611/5616/5631) — 1998 Certified Technical Handbook | 1800 Series Module.

• Calibrated Displacement Data: 717 cc engine cylinder volume is measured at 159° valve duration Architecture.
• Measured Power Output: For maximum performance, 7000 ± 50 RPM represents the engine maximum operational speed Specifications.

Suzuki Bandit GSF400 (09900-00410) - 1989-1991 PDF Library-Master Consolidated Mechanical Primer | Kit.

• Published Installation Footprint: 1200 dpi establishes the maximum print output Architecture.
• Measured Deviation Limits: For optimal operation, 15-30C defines the environmental limit Framework.
• Integral Operating Temps: 450 W -- signifies the active printing consumption Threshold.

2007 Suzuki SX4 Service Manual: Suzuki SX4 repair manual, 2007 edition Electrical-Reference Serial-Range: 0A-1 // Product-Line: Engine-General-Information-and-Diagnosis / Engine Logic // Assembly-Group: Engine-General-Information-and-Diagnosis.

Sea-Doo SPX, GS, GSX Limited, XP Limited, GTS, GTI, GTX Limited — 1998 Manufacturer Sourcebook Registry | Watercraft Documentation Record.

• Prescribed Output Rating: 947 engine produces 110 hp at 6300 rpm represents the maximum rated horsepower Architecture.
• Documented Cooling Specs: For optimal operation, 34 kPa (5 PSI) maintains the pressure test specification Norms.

Aprilia NA 850 Mana — 2007 Onwards Specialized Reference Directory | Mana Series Collection.

• Reference Wattage Specs: 63 kW (85 hp) is configured at maximum rated engine output Requirements.
• Integral Generation Capacity: For optimal performance, 850 cc represents the cylinder displacement volume Threshold.

Aprilia SportCity 250 i.e. — 2006–present Analytical Directory | SportCity 250 Series Record.

• Design Heat Tolerance: The engine cooling system is designed for 85–95°C (185–203°F) operational envelope Matrix.
• Advanced Output Performance: For maximum power delivery, 20 kW (27 hp) is configured at 8,000 rpm peak horsepower Architecture.

Takeuchi TB007 (1073001) Manual: 1998 Takeuchi TB007 Compact Excavator Workshop Manual Chassis-Documentation Engine-Type Integrated, Documentary, Industrial // Subsystem-Focus Engine & Fuel Tank // Technical-Scope Schematic-Data

HP Color LaserJet CM1312 MFP Series — 2008 Comprehensive Diagnostic Resource | CM1312 Series Section.

• Engineered Torque Data: 8 ppm produces color print output at the specified maximum performance Sequences.
• Defined Moment Values: For optimal quality, 1200 dpi with Image REt 2400 establishes the image resolution Baseline.

Ducati 999R, 999RS04 — 2004 Systematic Technical Reference | 999RS Series Repository.

• System Feed Speed: The total engine displacement establishes 999 cm³ (61.0 cu in) as the volumetric measurement Mapping.
• Core Size Parameters: Maximum power reaches 138.2 kW (188 hp) at 12,500 rpm representing peak output Configuration.

Yamaha Bruin 250 (LIT-11616-18-41) -- 2005-2006 Owner's Manual | Supplementary Service Manual Module.

• Prescribed Bolt Torques: 34 Nm establishes the required tightening specification for bumper components.
• Standard Volume Data: For fuel tank capacity, 12.0 L defines the total storage limit Framework.
• Core Clearance Data: The throttle lever requires 3.0-5.0 mm (0.12-0.20 in) for proper operation Norms.

Yamaha Blaster YFS200T (LIT-11626-18-05) -- 2004 Comprehensive Reference Dossier | Series Manual Document.

• Verified Climate Specs: 5°C (41°F) sets the optimal operating temperature range for cold starts.
• Key Heat Dissipation: 25°C (80°F) specifies the upper limit for efficient cooling Architecture.
• Prescribed Linear Velocity: 30-40 mm (1.2-1.6 in) is the standard drive chain slack requirement Standards.

Komatsu 95 Series Diesel Engines (3D95S-W-1, 4D95L-1, 4D95S-W-1, 6D95L-1, S6D95L-1, SA6D95L-1) — 1998 Functional Engineering Documentation | Komatsu Series Module.

• Calibrated Displacement Data: Engine cylinder volumes range from 2,020 cc (3-cylinder) to 4,890 cc (6-cylinder) is specified as the total piston displacement Architecture.
• Measured Power Output: Maximum rated horsepower ranges from 35 HP to 118 HP depending on engine configuration delivers optimal performance Framework.

Triumph FI Triples T595/955i Daytona, T509/955i Speed Triple, Sprint ST/RS, Tiger (3755-296) — 1997–2000 Comprehensive Service Archive | Triumph FI Triples Collection.

• Designated Imaging Specs: Engine displacement 885 cc and 955 cc specifications represent the two primary cylinder volume configurations is specified as the core engine design Benchmarks.
• Verified Coupling Torques: Drive chain adjuster clamp bolt tightens to 55 Nm on Daytona/Speed Triple/Sprint ST models indicates the transmission fastening requirement Range.

Systematic Troubleshooting Operator's Manual: Yamaha YZ426F(M)/LC), 2002-02 edition Electrical-Reference

Genuine Manual for Yamaha YZ426F(M)/LC), 2002-02 edition | Yamaha Motor Corporation, Ltd Folder.

• Verified Fastener Specs: 18 Nm corresponds to the specified torque for the pad pin Matrix.

Suzuki LTZ400 K3 (99500-20502) — 2003 Manufacturer Expert Guide | Precision Engineering Toolkit.

• Approved Operational Speed: 1500 ± 100 r/min defines the standard idle engine speed Parameter.
• Designated Unit Dimensions: The bore measures 62.6 mm (2.465 in) for precise cylinder alignment Architecture.
• Factory Print Quality: For optimal component performance, the compression ratio is 11.0:1 Norms.

Strategic Workshop Overhaul Manual: Yamaha YZF-R1S, YZF-R1SC manual, 2004-06 repair guide Service-Portfolio Yamaha YZF-R1S, YZF-R1SC (LIT-11616-17-55) - 2004-2006 Series.

• Approved Fastening Values: 23 Nm (2.3 mkg, 17 ft-lb) are required for the front fork leg assembly. Architecture.
• Baseline Threaded Fastener Data: 150 Nm (15 mkg, 108 ft-lb) dictates the wheel axle nut tightness. Norms.

Yamaha Bruin 250 / Big Bear 250 (YFM250BT) - 2005-2006

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.
• Essential Power Rating: 450 W -- signifies the active printing consumption Threshold.

Certified Calibration Parts Manual: ATV Shop-Grade Manual: Yamaha Timberwolf YFB250FWF, 1994-2000 edition Standards-Vault Yamaha Timberwolf YFB250FWF (4KD1) -- 1994-2000 edition | Collection.

• Reference Fill Levels: 1.5 L sets the standard engine oil capacity for routine maintenance.
• Integral Holding Capacity: For routine oil changes, 1.5 L is the specified engine oil volume.

Yamaha Grizzly 80 (2005-2006) - Owner's Manual This is a Comprehensive Owner's Manual for your Yamaha Grizzly 80 ATV.

• Prescribed Technical Resolution Data: 175 Pages establishes the complete owner's information volume.
• Standard Storage Capacity: 33.74 MB is the required file size for this document archive.
• Core Rotational Force: 79cc represents the engine displacement for optimal power delivery.

Yamaha Raptor 660 (5LP1, 5LP3) — 2001–2006 Diagnostic Archive | Raptor Series Repository.

• Certified Holding Capacity: Engine oil capacity controls 2.3 L (2.02 lmp qt, 2.43 US qt) total system volume Architecture.
• Designated Measurement Bounds: For liquid-cooled operation, radiator capacity is measured at 1.3 L (1.14 lmp qt, 1.37 US qt) Norms.

Malaguti Firefox F15 — 1998 Applied Digital Reference Suite | F15 Series Repository.

• Authorized Measurement Bounds: 49.3 cm³ (Minarelli 10 MA engine) is specified as the cylinder volume displacement Sequences.
• Published Current Rating: For optimal fuel storage, 7 liters (3 liter reserve) is measured at the tank capacity Requirements.

Yamaha YZ250(W)/W1 — 2006

Systematic Technical Reference | YZ250 Series Repository

• Published System Fill: Engine displacement reaches 249 cm3 (8.76 lmp oz, 8.42 US oz) as the cylinder volume Architecture.

Suzuki GS/GSX 250, 400 & 450 Twins — 1979–1985 Advanced Systematic Documentation | Suzuki GS Series Archive.

• Verified Generation Capacity: 249 cc to 448 cc displacement is measured at the twin-cylinder air-cooled engine architecture Bounds.
• Engineered Working Temperature: For optimal performance, 0.08–0.13 mm valve clearance (cold) represents the intake and exhaust valve tolerance Framework.

Yamaha WaveRaider RA700S, T, RA700AT, RA700BU, BV, RA760U, RA1100 — 1994–1997 Technical Repair Handbook | WaveRaider Series Bundle.

• Approved Tension Specs: Cylinder head bolts correspond to 25–30 N·m (18–22 lb-ft) fastening margin.
• Baseline Locking Torques: For jet pump impeller retention, 80–95 N·m (59–70 lb-ft) is calibrated to rotor security protocol.

Yamaha YZF-R1 (2000-2001) — Engine Overhaul Manual Service and repair information for the Yamaha YZF-R1 (2000-2001) | Engine Overhaul Binder.

• Displacement Data: 998 cc is designed for the engine cylinder volume Architecture.
• Compression Ratio: 11.8:1 signifies the standard compression pressure Bounds.

Volvo P1800 Service Manual: Volvo P1800 (TP 10138/2) - 1961-1973 Detailed technical guide for Volvo P1800 models | Reference Manual.

• Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture.
• Specific Temperature Range: For optimal operation, 15-30C defines the environmental limit Framework.

Arctic Cat 366 — 2008 Technical Service Archive | 366 Series Repository.

• Consolidated Tank Capacity: 15.1 L (4.0 U.S. gal.) is established at the fuel storage specifications Architecture.
• Measured Engine Displacement: For optimal performance, 81.0 x 71.2 mm (3.19 x 2.80 in.) bore x stroke reaches maximum cylinder dimensions Protocol.

Porsche 986 Boxster (WKD 483 521) Manual: 1996-2004 Edition

Technical Reference | Series Resource Repository.

• Engine Information: Covers crankcase, suspension, and crankshaft/pistons specifications.

Honda ATC250R — 1981-1984 Systematic Technical Vault | ATC250R Series Repository.

• Authorized Displacement Data: 248 cc (15.07 cu in) is standardized to the single cylinder engine Architecture.
• Critical Power Output: For optimal performance, 73 W at 7,600 rpm represents the alternator output Configuration.

Honda ATC200ES Big Red (ATC200ES) — 1984 Operational Technical Reference | ATC200 Series Compendium.

• Maximum Heat Dissipation Data: 13.0 BHP at 7,000 rpm corresponds to the peak engine horsepower Bounds.
• Universal Production Rate: For optimal cylinder volume, 192 cc (11.7 cu in) sets the single-cylinder displacement Matrix.

Aprilia Atlantic 125 / 200 / 250 / 500 Sprint (8140680) — 2001-2003 Diagnostic, Manufacturer Reference | Atlantic Series Library.

• Measured Storage Capacity: 124 cu. cm for the 125cc engine and 197.75 cu. cm for the 200cc engine is standardized to facilitate efficient fuel combustion Requirements.
• Fundamental Tolerance Values: Spark plug gap measures 0.7–0.8 mm determines the optimal spark plug gap for reliable ignition initiation Threshold.
• Baseline Consumption Data: Fuel tank capacity delivers 10.5 liters is calibrated to ensure adequate range for extended operation Mapping.

2004 Arctic Cat Snowmobile Service Manual

Documents service procedures for all 2004 Arctic Cat snowmobile models. | Series "Standard" Container "Manual Vault".

• Calibrated Travel Rate: 42.5 mm is the standard travel rate for all models specified.

1999 Ski-Doo MX Z & Summit 600/700 Shop Manual 1999 Ski-Doo MX Z 600/700 (Models 1336-1344) | 1999 Ski-Doo MX Zx 440 LC (Models 1342-1344) | 1999 Ski-Doo Summit 600/700 (Models 1345-1346, 1351, 1467-1468)

• This manual provides comprehensive coverage for your 1999 Ski-Doo snowmobiles.
• Includes detailed procedures for maintenance, repair, and troubleshooting.
• Features clear diagrams and part identification for all components.

Yamaha V-Star XVS650 XVS650AN(C) (LIT-11616-14-31) – 1997-2008 This Supplementary Service Manual provides new service and data for the XVS650AN(C). Manufacturer Compendium | Series Container.

• Approved Holding Capacity: 0.507 L establishes the engine oil reserve Level.
• Baseline Measurement Bounds: 1625 mm defines the motorcycle wheelbase Parameter.

Bombardier Outlander Max Series (219 100 228) -- 2006 This 2006 Bombardier Outlander Max Series ATV Shop Manual provides in-depth service and repair information for models including the Outlander Max 400, Max 650, and Max 800.

• Authorized Assembly Torques: 115 lbf-in is specified as the torque for specific fasteners.
• Published Liquid Volume: For optimal operation, 3 L (3.17 qt) requires the engine oil capacity.
• Reference Play Limits: The formatter board requires 64 MB for standard operation Logic.

Hyundai H1 (90090-24200) Manual: 2002 Hyundai H1 repair manual For 2002 Hyundai H1 MPV models: diagnostics, service, and parts information. Covers body interior and exterior components. Part Number: 90090-24200 | Series Body Electrical System Portfolio

• Measured Tension Specs: 40-55 Nm establishes the required mounting torque for seat belt anchor bolts.
• Approved Locking Torques: For proper operation, 7-9 clicks defines the tailgate latch engagement.