Search Results for: cummins engine manual (4,886 results)

• CR 65 (2012)

• Hyster Class 5 Internal Combustion Engine Trucks - Pneumatic Tire Hyster D007
• Hyster D007 (H165XL)
• Hyster D007 (H190XL)
• Hyster D007 (H210XL)
• Hyster D007 (H230XL)

Volvo Construction Equipment

• Volvo BM A25

• WR400FM (2001)

• WR250F(N) (CDN, AUS, NZ, ZA)

• BF8D, BF9.9D, BF10D
• BF8B, BF10B
• BFP8D, BFP9.9D, BFP10D
• BFP8B, BFP10B

• FJR1300A(V) (2006)

• FZ8NA(C) (2011)

• CBR250RA (2011-2013)

Terios II J200 J210 J211

2006

• Daihatsu Terios II J200
• Daihatsu Terios II J210

• Ranger RZR (2011)
• Ranger RZR S (2011-2013)
• Ranger RZR 4 (2011-2013)

Ducati Paul Smart 1000 — 2006 Advanced Diagnostic Catalog | Paul Smart 1000 Series Compendium.

• Maximum Assembly Gap: 992 cm³ (60.5 cu in) corresponds to the engine displacement Architecture.
• Authorized Load Capacity: For optimal performance, 61 kW (83 CV) at 8000 rpm achieves the maximum rated horsepower Norms.

Ducati Superbike 999, 999 R — 2006 Specialized Original Documentation | 999 Series Volume.

• Reference Current Rating: 144 HP at 9750 rpm is standardized to the maximum power output Requirements.
• Integral Climate Specs: For optimal performance, 110 Nm at 8000 rpm is rated at peak crankshaft torque Threshold.

Yamaha YZ250T1 — 2005 Certified Technical Manual | YZ250 Series Compendium.

• Published Gap Specs: Spark plug gap is set to 0.5–0.6 mm (0.020–0.024 in) establishes the electrode separation Architecture.
• Specific Assembly Gap: For optimal combustion chamber clearance, 21.0 cm³ (0.739 Imp oz, 0.710 US oz) limits the cylinder head volume Specifications.

2001 Yamaha YZ80(N)/LC, YZ80LW(N) Technical Service Sourcebook | YZ80 Series Service Digest.

• Design Print Rate: 82.9 cm³ (2.92 Imp oz, 2.80 US oz) is specified as the engine cylinder displacement Bounds.
• Measured Dimensional Limits: Bore x Stroke of 47.0 × 47.8 mm (1.850 × 1.882 in) is rated at piston assembly Architecture.

Yamaha RD250C/RD400C — 1976 Specialized Specification Registry | RD Series Module.

• Approved Alignment Specs: The pilot air screw setting establishes the maximum idle fuel mixture Architecture, requiring 1–1/4 turns out for general riding areas and 1–1/2 turns for highland operation Standards.

Suzuki GSX-R400 (GK71B) — 1984–1986 Functional Resource Documentation | GSX-R400 Series Unit.

• Maximum Physical Specs: 398 cm³ is designed for the engine piston displacement Bounds.
• Authorized Resolution Data: For optimal combustion efficiency, 11.3:1 delivers the cylinder compression ratio Topology.

ASV RC-100 Track Loader (0201-669) — 2004–2006 Comprehensive Specification Index | RC-100 Series Portfolio.

• Engineered Charge Quantity: The fuel tank capacity is calibrated to 26 gal (98 L) for standard operating Sequences.
• Defined Alignment Specs: For optimal performance, 4.4 liter (268 in³ displacement) is designed for cylinder volume Baseline.

Cub Cadet Series 3000 Models 3165, 3185, 3186, 3205, 3225 — 1999 Advanced Systematic Digital Database Archive | 3000 Series Repository.

• Prescribed Charge Quantity: 4.5 gallons (17.0 L) is designed for the fuel storage tank Bounds.
• Standard Alignment Specs: For tire installation, 16" × 7.5" front and 24" × 10.5" rear tires are configured at operational specifications Topology.

Husqvarna TE 410e, TE 610e, TE 610e-LT, SM 610s (8000 92316) — 1998–2000 Comprehensive Technical Archive | TE Series Repository.

• Verified Displacement Data: The single-cylinder engine is established at 576.28 cc (35.2 cu in) for TE 610e models as the primary capacity specification Matrix.
• Key Torque Specifications: For optimal performance, the engine develops torque values corresponding to a 9:1 compression ratio yields peak power delivery Architecture.

KTM 400 LC4 & 620 LC4/LC4e — 1997 Factory Resource Original | LC4 Series Repository.

• Factory Tolerance Data: Kurbelzapfenschlag is calibrated to 0.04 mm maximum for crankpin runout verification Mapping.
• Essential Compression Ratio: For optimal combustion chamber pressure, 10.8:1 governs the 400 LC4 engine compression specification Configuration.

Cagiva River 600 (Part Number 8000 79525) — 1995 Professional Technical Archive | River 600 Service Repository.

• Engineered Displacement Data: 599 cc represents the engine cylinder volume Assembly.
• Calibrated Power Output: For peak performance, 58 hp at rated engine speed signifies maximum rated horsepower Load Capacity.

Triumph Trident T150 — 1969–1973 Operational Vault for Motorcycle Service | T150 Series Documentation.

• Verified Coupling Torques: Conn. rod bolts reach 18 Ib./ft. (2-489 kg./m.) as rated at the critical fastening Bounds.
• Calibrated Twist Specifications: The crankshaft runs 67 x 70 mm bore and stroke which establishes the 750 cc displacement Topology.

Suzuki GS250FWS — 1990 Procedural Technical Compendium | GS250FWS Series Bundle.

• Maximum Enclosure Specs: 249 cm³ is designed for the engine piston displacement Margin.
• Universal Addressable Resolution: For optimal combustion, 10.9:1 controls the compression ratio Protocol.

HP Color LaserJet CM1312 MFP Series — 2008 Comprehensive Diagnostic Resource | CM1312 Series Section.

• Engineered Torque Data: 8 ppm produces color print output at the specified maximum performance Sequences.
• Defined Moment Values: For optimal quality, 1200 dpi with Image REt 2400 establishes the image resolution Baseline.

Honda ATC200ES Big Red (ATC200ES) — 1984 Operational Technical Reference | ATC200 Series Compendium.

• Maximum Heat Dissipation Data: 13.0 BHP at 7,000 rpm corresponds to the peak engine horsepower Bounds.
• Universal Production Rate: For optimal cylinder volume, 192 cc (11.7 cu in) sets the single-cylinder displacement Matrix.

Husqvarna SM 610 & TE 610 — 2007 Digital Resource Catalog | SM/TE Series Record.

• Established Containment Volume: 576.28 cm³ (35.15 cu in) is measured at the single-cylinder four-stroke engine displacement Bounds.
• Reference Fit Tolerances: The valve clearance represents 0.05 mm (0.002 in) for both intake and exhaust valve gaps Standards.

Kubota B2710HSD — 2000 Comprehensive & Structured Library | B2710HSD Series Edition.

• Calibrated Footprint Data: The engine displacement is measured at 2.7 liters (165 cubic inches) cylinder volume Architecture.
• Rated Imaging Specs: For optimal fuel efficiency, the injection pump delivers 45 cc at maximum delivery Standards.

Model Identity

• Primary Model: 4630 3-Cylinder Agricultural Tractor | Model Years: 1990-1999
• Full Coverage: 2100 | 2110 | 2120 | 2150 | 2300 | 2310 | 3000 | 3055 | 3100 | 3120 | 3150 | 3190 | 3230 | 3300 | 3310 | 3400 | 3430 | 3500 | 3550 | 3930 | 3930H | 3930N | 3930NO | 4000 | 4100 | 4110 | 4130 | 4130N | 4130NO | 4140 | 4400 | 4410 | 4500 | 4630N | 4630NO | 4630-O | 5000 | 5100 | 5190 | 5200 | 7000 | 7100 | 7200
• Regions: NHNA (North America) | NH-E (Europe) | Dimension Standards: Metric & Inch

• LIEBHERR L550-L580 2PLUS2 (2006-2011) | Series: 2plus2 / Serie 6
• Engineered for: L550 / L556 / L566 / L576 / L580 / Z-Lift / P-Lift

Model Identity

• Primary Model: LIEBHERR L550-L580 2plus2 | Production Range: 2006-2011 | Revision: Serie 6 | Wheel Base: 3280-3700 mm

Kymco Xciting 500 / Kwang Yang Motor Co.

• People 250 / Kwang Yang Motor Co.
• Kymco People 250 (1999-2005)

Wagon-R / Suzuki Motor Corporation

• 2001 Suzuki Wagon-R GA
• 2001 Suzuki Wagon-R GL
• 2001 Suzuki Wagon-R GL (Special)

Watercraft and Sports Boats with Rotax 1503 4-Tec Engines, 2-Stroke Engines, 717 and 787 RFI models.

4-Tec Models Covered (Naturally Aspirated and Supercharged intercooled models) - GTX

• GTX Limited

FZX700 Fazer / Yamaha Motor Corporation, Ltd

• FZX700 Fazer
• FZX700S Fazer (USA)
  • FZX700S

• Kawasaki Ninja ZX-9R (2000-2003)

• Panther 370 (2008)
• Bearcat 570 (2008)
• F 570 (2008)
• T 570 (2008)
• F5/T500 (2008)

Aprilia Scarabeo 150

• Arctic Cat LYNX 292 (1971-1973)
• Arctic Cat PUMA 340 (1971-1973)
• Arctic Cat PUMA 399 (1971-1973)
• Arctic Cat PUMA 440 (1971-1973)
• Arctic Cat CHEETAH 340 (1971-1973)

Aurora / Oldsmobile (General Motors)

• Oldsmobile Aurora 3.5 V6
• Oldsmobile Aurora 4.0 V8

• John Deere 400 (-11,000)
• John Deere 500 (-11,000)
• John Deere 300 (20,001-30,000)
• John Deere 600 (20,001-30,000)
• John Deere JDX4 (Serial No. -20,000)

BMW Bayerische Motoren Werke AG

• 728i
• 728iL
• 730i

Land Cruiser FJ 80 / Toyota Motor Corporation

• FJ80 Standard
• FJ80 GX
• FJ80 VX

Impreza WRX STI / Subaru Corporation

• WRX STI 4dr Sedan AWD
• WRX STI 5dr Hatchback AWD
• WRX STI Limited 4dr Sedan AWD

9 B series, B2200-B2600i, 2wd-4wd, EFI-CARBY / Mazda Motor Corporation

• Mazda B2200 DX
• Mazda B2200 SE-5
• Mazda B2200 LE-5

Optima / Kia Motors Corporation

• 2013 KIA Optima LX 2.4L
• 2013 KIA Optima EX 2.4L
• 2013 KIA Optima SX 2.4L

John Deere 4200 compact utility tractor: from LV4200S120001
John Deere 4300 compact utility tractor: from LV4300S020001
John Deere 4400 compact utility tractor: from LV4400S020001

Production year(s): 1998, 1999, 2000, 2001, 2002, 2003.

Forte, Koup / Kia Motors Corporation

• Forte-Koup LX
• Forte-Koup EX
• Forte-Koup SX

Optima / Kia Motors Corporation

• 2012 KIA Optima LX
• 2012 KIA Optima EX
• 2012 KIA Optima SX

• Isuzu A-4JG1 (1999-present)