CASE IH JX Series (JX60, JX70, JX80, JX90, JX95) Tractors Service Manual: 2006

JX Series Tractors - Definitive Operations Manual | Reference Module

• Maximum Power Output: 43.4 kW (59 hp) for the JX60 model at 2500 rpm Architecture.
• Specific Torque Rating: 20.7 daNm is the maximum torque for the JX60 model at 1500 rpm Norms.
• Total Displacement: 2931 cm3 specifies the engine's total displacement for JX60 and JX70 models Bounds.

Isuzu 4HK1 / 6HK1 Diesel Engine Workshop Manual: Isuzu Motors Ltd - Archive

Comprehensive Structured Manufacturer Specification Registry.

• Operational Data: 5193 cc is the displacement capacity for the 4HK1 engine Architecture.
• Specific Compression Ratio: For optimal combustion, 17.5 represents the calculated compression Ratio Standards.
• Essential Idle Speed: The engine idles at 800 rpm to maintain operational Baseline Protocol.

Mazda 5 (9999-95-030F-12) - 2012-2014

This bodyshop manual is intended for use by technicians of Authorized Mazda Dealers to help them service and repair Mazda vehicles. It can also be useful to owners and operators of Mazda vehicles in performing limited repair and maintenance on Mazda vehicles.

• Prescribed Weld Points: 10 continuous CO2 arc welds are required for front bumper bracket installation.
• Documented Thickness: The outer panel of the front fender is 0.75 mm (0.030 in) thick.
• Maximum Panel Tolerance: The difference in thickness between the upper and lower apron reinforcement panels is 0.50 mm (0.020 in).

Yamaha Grizzly 350 (YFM35GW) - 2007-2011 Owner's Manual

2007-2011 Yamaha Grizzly 350 (YFM35GW) Owner's Manual | 4WD ATV Volume.

• Factory Specifications: Engine Type: Air cooled 4-stroke, SOHC establishes the engine configuration Baseline.
• Certified Maintenance: Ground Clearance: 245 mm (9.6 in) defines the minimum obstacle clearance Requirements.

2013 Yamaha Raptor 700R (YFM7RD/YFM7RSED, YFM700RD/YFM700RSED) Owner's Manual - 2013 edition

This owner's manual is the definitive guide for your Yamaha Raptor 700R/YFM700RSED.

• Published Circuit Specs: 27.5 kPa establishes the recommended tire pressure Framework.
• Measured Heat Tolerance: For optimal operation, 20-40 hours defines the air filter cleaning interval Norms.
• Approved Processing Speed: 1500-1700 r/min signifies the standard engine idling speed Bounds.

Case 430/440 Skid Steer Loader and 440CT Compact Track Loader Service Manual: Case 430/440 Skid Steer Loader and 440CT Compact Track Loader – Official Factory Repair Manual

Documents service procedures for Case 430, 440 Skid Steer Loaders, and 440CT Compact Track Loaders (Tier 3). Publication 87634767.

• Technical Specifications: 83.3 litres capacity is measured at the fuel tank specification Bounds.
• Cooling System Capacity: For optimal operation, 17 litres capacity is set to the cooling system specification Topology.

2004 KIOTI CK25/30 CK25H/30H Workshop Manual

This manual details the service and maintenance of KIOTI CK25/30 and CK25H/30H tractors.

• Verified Voltage Specs: 12 V establishes the standard electrical system operation Parameters.
• Engineered Thermal Limits: For optimal operation, 71°C (160°F) establishes the thermostat opening temperature Standards.

Yamaha Raptor 90 (43D-F8197-12) 2011-2013

Owner's Manual | PDF 2011-2013 Operations-Manual

• Model Code: 43D7
• Engine Type: Air cooled 4-stroke, SOHC
• Displacement: 88.0 cm³

MerCruiser GM V-8 Engine Service Manual (1985-1989) - Number 16

Mercury MerCruiser 262 CID (4.3L) (90-861328-1) - MCM Models (Sterndrive) / MCM (Sterndrive) Comprehensive service documentation addressing engine disassembly, inspection, assembly, and adjustment.

• Published Technical Data: 190 HP establishes the rated power output Specifications.
• Specific Engine Configuration: For optimal performance, the V-6 configuration ensures efficient operation.

2013 Arctic Cat Prowler HDX (0486-434) - Factory Service & Troubleshooting Manual

Arctic Cat Prowler HDX (2013) | Prowler HDX Bundle.

• Established Velocity Specs: For optimal operation, 327.6 cm establishes the maximum vehicle length Specification.
• Operational Component Weight: ROPS Tested Curb Weight achieves 680 kg (1500 lb) Framework.
• Essential Addressable Resolution: For optimal operation, 153 cm defines the environmental limit Topology.

2013 Arctic Cat 500 / 700 / 1000 ATVs Service Manual

Wiring diagrams, specifications, and repair sequences for Arctic Cat 500, 700, and 1000 Utility models. Ref: 0486-219 | Series Vault.

• Established System Volume: 2.9 L (3.0 U.S. qt) Coolant Capacity establishes the base system fluid quantity.
• Reference Spacing Data: For essential system clearances, 0.08-0.12 mm (0.003-0.005 in.) intake valve/tappet clearance is specified.
• Essential Wattage Specs: 12V/8W/27W Taillight/Brakelight components signify the standard illumination ratings.

Essential Field Calibration Manual: Arctic Cat 400 TRV (2013) - Service, Repair & Troubleshooting Manual Hydraulic-Guide

Nissan Maxima Automatic Transaxle Manual: Nissan Maxima 2000-2002 repair guide Chassis-Documentation

Automatic Transaxle: Nissan Maxima 2000-2002 / 5-speed Automatic Logic // System-Identifier: Automatic Transaxle / RE4F04B & RE4F04W Logic // Diagnostic-Area: Automatic Transmission // Technical-details: Diagnostic Trouble Codes, Wiring Diagrams, Component Testing, Overhaul Procedures

Suzuki LT-F250/LT-F250F (99500-42143-01E) - 1999-2002

Reference Procedural Collection | Series Service Manual.

• Factory Tightening Data: 11 N-m is specified as the exhaust pipe nut torque for proper seal.
• Certified Fill Levels: For differential gear oil, 150 ml requires the specified GL-5 rating.

2013 Arctic Cat 450 ATV Service Manual

Comprehensive shop manual for the 2013 Arctic Cat 450 ATV, covering all service, maintenance, and troubleshooting procedures with detailed diagrams. Ref: 0486-469 | Service Portfolio

• Engine Specifics: 15.1 L coolant capacity ensures optimal thermal regulation.

2002-2009 Suzuki Ozark LT-F250 ATV Service Manual

Documents service procedures for the Suzuki Ozark LT-F250 (2002-2009) | Vehicle Service Edition.

• Technical Specifications: Features 246 cm
• Engine Type: Four-stroke, air-cooled, OHC configuration.

Iveco Trakker Euro 4 & 5 Trucks (AD, AT, AD-N, AT-N Models), 2004-13 Service-Portfolio

Repair guide for all Trakker models with Euro 4 and Euro 5 engines. | Iveco Trakker Archive.

• System Data: 4x2 Chassis Cab denotes standard operational configurations.

Terex 2566C, 2766C, 3066C Articulated Dumptruck Service Manual: Terex Corporation

Terex 2566C, 2766C, 3066C (SM 962/963/964 Rev 1) | Service Manual Folder. Published Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture. Specific Fuel System: For optimal operation, 245 litres defines the fuel capacity Framework. Approved Lubrication System: 200 litres -- signifies the active hydraulic system consumption Threshold.

Yamaha V-Star 1100 (LIT-11626-21-28) 2001-2009

Owner's Manual | Owner's Manual Archive

• Prescribed Amperage Specs: 10 A is the standard current capacity for the fuse system Logic.
• Standard Production Rate: 200 kg is the maximum load capacity for the vehicle Framework.

Suzuki 2-225 HP (DT Series) Outboard Workshop Manual (1988-2003) - Model DT Series Service-Dossier

LaserJet 3100/3150 — print engine, scanner module, paper path, and electrical systems. PN C4256-90954 | Series

• Approved Installation Footprint: 1200 dpi establishes the maximum print output Architecture.
• Baseline Maximum Resolution: For optimal operation, 1200 dpi defines the optical resolution Framework.
• Verified Twist Specifications: 1000 rpm -- signifies the active printing consumption Threshold.

Professional Factory Technical Manual: Excavator Kobelco SK200-8, SK210LC-8 Hydraulic Excavator Shop Manual 2006-2011 Procedure-Database

Validation-Data: SK200-8, SK210LC-8 (S5YN0118E01) // Technical-Scope: Excavator / Hydraulic System Logic // Validation-Data: Shop Manual.

• System Load Capacity: 20,200 kg establishes the fully equipped weight for the SK200-8 model.
• Maximum Environmental Range: For optimal operation, -20 to 50°C defines the functional environmental limit Framework.

Kioti DK35, DK40, DK450L Tractor Repair Manual (2001-2007)

Kioti Daedong Tractor Service Collection | Module

• Approved Output Density: 1200 dpi establishes the maximum print output Architecture.
• Factory Rotational Force: For optimal operation, 15-30C defines the environmental limit Framework.

Kawasaki MULE 3010 TRANS 4x4 (99924–1343–01) — 2005–2008

Kawasaki MULE 3010 TRANS 4x4 Service Manual | OEM Specs Assembly-Guide. Series KAF620-J1, KAF620-K1.

• Designated Deviation Limits: 0.03 mm (0.001 in.) is the maximum cylinder head warp allowed under standard conditions.
• Primary Energy Draw: 4.6 L (4.9 US qt) defines the total coolant capacity for optimal system operation.

Kawasaki KX450F (99987-1795) -- 2014

This Owner's Manual | Competition Motorcycle. Division.

• Engine Specifications: 449 cc single-cylinder, 4-stroke DOHC engine with 12.5:1 compression ratio establishes peak power output.
• Fuel System: Keihin 43mm throttle body with DFI delivery circuitry supports a 6.2 L fuel tank capacity.

Yamaha XT250 XT250D/XT250DC (LIT-11626-26-08) — 2012

Technical reference spanning Yamaha XT250D and XT250DC models. Covers engine, transmission, chassis, and electrical systems. Ref: LIT-11626-26-08 | Series Archive Unit

• Published Net Mass: 132 kg is rated at the vehicle's curb weight Capacity.
• Specific Scan Resolution: For optimal display, 300 dpi establishes the maximum clarity of instrument readings.
• Approved Rotational Force: 10.0-15.0mm -- signifies the clutch lever free play Specification.

KTM 450 SX-F / XC-F (2014) Service Manual

Technical Reference | Owner's Manual Edition

• General Specifications: 449.3 cm³ displacement provides ample power for off-road riding.
• Suspension Travel: Front suspension offers 300 mm of travel for optimal terrain absorption.
• Brake System: Features disc brakes with brake calipers on floating bearings for reliable stopping power.

Kawasaki Z1000SX, Z1000SX ABS, Ninja 1000, Ninja 1000 ABS (2011-2013) (KAW1000SX-ENG) Documents service procedures for Kawasaki Z1000SX, Z1000SX ABS, Ninja 1000, and Ninja 1000 ABS models. Includes fuel system, engine top end, brakes, and electrical system. KAW1000SX-ENG | Edition: 2011-2013

• Certified Technical Data: 1043 cm³ represents the engine's displacement capacity Architecture.
• General Performance Specs: 101.5 kW signifies the maximum engine output at 9600 rpm Standards.
• Defined Engine Specs: For optimal operation, 11.8 : 1 defines the compression ratio Framework.

Yamaha Grizzly 550 (YFMS50DE/YFMS50DHE/YFMSSOPE/YFMSSOPHE) (LIT-11626-27-22) - 2013

Yamaha Grizzly 550 (YFMS50DE/YFMS50DHE/YFMSSOPE/YFMSSOPHE) (LIT-11626-27-22) - 2013 | Technical Collection Section

• Engineered System Volume: For optimal operation, 558 cc establishes the engine displacement Architecture.
• Design Spacing Data: For proper function, 275 mm governs the ground clearance Baseline.
• Documented Wattage Specs: The lighting system is specified as 35.0 W x 2 -- signifies the active lighting consumption Threshold.

Navistar MaxxForce 11 / 13 Diesel Engines (EGES-465-1) – 2010-Present

This Engine Service Manual | Digital Database | Folder.

• Published Output Rating: 350-450 hp establishes the horsepower range.
• Measured Cooling Specs: 83-95°C (181-203°F) defines the primary thermostat operating range.
• Approved Print Rate: Up to 345 kPa (50 psi) increases charge air pressure.

2011 Nissan Maxima Service Manual: Nissan Maxima A35 manual, 2011 edition Operations-Manual

Nissan Maxima SV / Nissan Maxima S (2011) Series Dossier.

• Design Net Mass: 1200 kg establishes the vehicle's gross weight Measure.
• Advanced Scan Resolution: For accurate component identification, 600 dpi defines the scanning limit Matrix.

Certified Safety Parts Manual: ATV Honda Fourtrax TRX 250X 1987 - Authorized Service & Repair Manual Specification-Guide

Honda Fourtrax TRX 250X (61KB500) -- 1987 Comprehensive Structured Guide | Edition.

• Verified Climate Parameters: 15-30C defines the environmental limit Matrix.
• Engineered Processing Speed: 25 ppm establishes the maximum print output Standards.

Honda TRX250TM/TE (61KZZ00) Manual: 2005-2011

TRX250TM/TE Specifics | Series Recon Module.

• Maximum Power Draw: 120 W is rated at the maximum electrical system draw.
• Authorized Ambient Limits: For optimal operation, -10-40C provides the environmental limit Topology.
• Established Feed Speed: The engine requires 1.5 liters for standard operation Standards.

Honda CRF250R (2010-2013) Service Manual: Honda CRF250R Motocross Motorcycle Service Manual, covers 2010-2013 Service-Catalog

Documentary Documentation | Collection.

• Designated Production Rate: 24.5 kg establishes the total engine dry weight Metric.
• Primary Physical Specs: For drivetrain, 249.4 cm3 defines the displacement Metric.

KIA Sorento (2013) (SD313-17)

MFI Control System (G4KJ : THETA II 2.4L GDI) (3)

Wiring diagrams and technical information for the 2013 KIA Sorento.

• Design Velocity Specs: 0.3G/O is specified as the wire color for the ERI-CHGAA connector.
• Verified Component Weight: For the PCM, 0.5R is measured at the CHG-A connector.

Unified Instructional Factory Manual: Diesel Engine Official Yanmar SD20, SD30 & SD31 Sail Drive Unit - Diagnostic & Maintenance Manual OEM-Documentation

Technical-Scope: Yanmar SD20, SD30, SD31 Sail Drive Unit // Model-Portfolio: SD20, SD30, SD31 / Sail Drive Unit Logic // Technical-Scope: Diagnostic & Maintenance Data.

Yanmar Sail Drive Unit Diagnostic & Maintenance Manual

Sea-Doo GTS/GTI/GTX/GTR/RXP/RXT & WAKE Series Shop Manual: 2012

Covers GTS, GTI, GTX, GTR, RXP, RXT & WAKE series with procedures for maintenance and repair. | Personal Watercraft (PWC) Archive Module.

• Prescribed Coupling Torques: 25 N•m is designed for engine mount securing Architecture.
• Documented Twist Specifications: For engine alignment, 24 N•m controls the torque value Norms.
• Maximum Holding Capacity: 4 N•m -- signifies the air intake silencer clamp torque Bounds.

2013 Harley-Davidson Touring Models (99483-13) - Service Manual

This comprehensive service manual provides all necessary repair procedures for your 2013 Harley-Davidson Touring model.

• System Alignment Specs: 36-60 in-lbs torque for air cleaner cover screws ensures proper system alignment.
• Specific Temperature Range: For optimal operation, air cleaner mounting without breather tubes is vented to the atmosphere in violation of legal emissions standards.
• Essential Power Rating: 108-132 in-lbs torque for cover bracket screws is essential for maintaining proper component operation.

KTM Duke 125 (3206110en) - 2011-2014

Original Original Catalog | Collection.

• Measured Engine Specs: 47.2 mm establishes the stroke length for engine performance.
• Integral Fastener Specs: For component security, M6 controls the thread size specification Benchmarks.
• Operational Tolerance Values: 0.08 mm signifies the maximum wear limit for the cylinder bore Configuration.

Arctic Cat Wildcat / Wildcat X / Wildcat 4 / Wildcat 4X / Wildcat X Limited ROV Service Manual 2014 Chassis-Documentation

Practical Operations Reference Manual: ATV Polaris Outlaw 450 MXR, Outlaw 525 S, Outlaw 525 IRS - Tough-Terrain Service Manual & Maintenance (2008) Field-Reference

Engine-Type: KTM Liquid-cooled, single cylinder, SOHC, 4-stroke, 5-Speed Manual // Operational-Framework: Engine Model ES045KLE012, ES051KLE012, ES051KLE013 // Engine-Type: 448cc / 510cc, 1-cylinder

• Established Capacity: 448 cc is the standard engine displacement for the Outlaw 450 MXR Unit.
• Operational Dimensions: 71.5 in. / 182 cm defines the overall length of all models.
• Essential Power Rating: 200W @ 3000 RPM signifies the alternator output Capability.

2005 Polaris Predator 50, Predator 90 & Sportsman 90 ATV Service Manual

Service documentation for 2005 Polaris Youth ATVs, covering Predator 50, Predator 90 & Sportsman 90 models. Includes comprehensive repair procedures and specifications. Part number 9919532.

• Engine Specifications: 89.2 cc displacement for Predator 90/Sportsman 90.
• Transmission Type: Integrated - Forward only transmission.

Polaris Sportsman 700/800 EFI (2006) - Owner's Manual

This manual covers the Polaris Sportsman 700 EFI and Sportsman 800 EFI, providing essential operational and safety information. | ATV Owner's Manual Kit.

• Maximum Dimensions: 83 in. (211 cm) overall length establishes the primary vehicle size Architecture.
• Universal Capacity: 100 lbs. (45 kg) front rack capacity governs the maximum load for the front storage Bounds.

Unified Engineering Factory Manual: Polaris Sportsman 600 & 700 (2004) - Service & Repair Manual 2004 Library-Master

Polaris Sportsman 600 & 700 (2004) Service Manual Technical-Scope: All specifications and procedures are based on the latest 2004 models. // Model-Portfolio: Covers both Early and Late 2004 models of the Sportsman 600 and 700. // Engineering-Base: Contains detailed diagrams and repair instructions. Engine Oil Capacity: 2 qt. / 1.9 L // Ground Clearance: 11.25 in. // Front Rack Capacity: 100 lbs. // Rear Rack Capacity: 200 lbs. // Towing Capacity: 1500 lbs. // Fuel Capacity: 4.25 gal US

2008 Polaris Phoenix 200 (9921499) - Precision Maintenance & Troubleshooting Guide

This Polaris Phoenix 200 manual provides expert maintenance and troubleshooting for your ATV.

• Authorized Service Data: 395 lbs. dry weight establishes the vehicle's curb weight Specifications.
• Published Engine Specs: For optimal performance, 196cc defines the engine displacement Metrics.

Polaris SLH, Virage, Pro 785 (9916289) -- 2000

Reference Reference Suite | Series Archive.

• Nominal Circuit Specs: The ignition system requires 25 A for standard operation Logic.
• Principal Heat Tolerance: For optimal operation, 700 CC establishes the environmental limit Framework.
• Rated Resolution Data: 1200 dpi establishes the maximum print output Architecture.

2007 Polaris Predator 50, Outlaw 90 & Sportsman 90 Maintenance & Repair Manual - 2007 Edition Calibration-Manual

Polaris 2007 Predator 50, Outlaw 90 & Sportsman 90 ATVs // ATV / Youth ATV Logic // Technical Specification Data.

• Engine Lubrication Data: Polaris Synthetic Youth 4-Stroke Oil SAE 40 (qt.) is recommended for operation above 32°F.
• Transmission Lubrication Data: Polaris AGL ATV Gearcase Lubricant (qt.) is specified for the transmission.

2008 Polaris Sportsman 500 / 500 EFI / 500 HO / Touring 500 EFI Service Manual

This comprehensive service manual covers the 2008 Polaris Sportsman 500, 500 EFI, 500 HO, and Touring 500 EFI models, providing detailed repair and maintenance information. | Series Sportsman | Folder

• Verified Technical Specifications: 83 in. (211 cm) length establishes the overall vehicle dimensions.
• Key Environmental Range: For optimal operation, 11 in. (27.94 cm) ground clearance ensures adequate passage over varied terrain.
• Principal Weight Data: 715 lbs. (324 kg) dry weight signifies the base weight without fluids.

2009 Polaris Phoenix 200 Service Manual: 4x4 Polaris Phoenix 200 Service Manual - Official Service & Repair Reference, covers 2009 Procedure-Database

Service Manual | Phoenix 200 Section System Maintenance Schedule: 25 hours is the standard interval for routine inspections and adjustments. Maximum Engine Output: 1500 ± 100 RPM defines the engine's idle speed specification. Measured Compression Pressure: 160-190 psi represents the standard compression pressure range.

Strategic Factory Assembly Manual: Polaris Scrambler 500 4x4, Scrambler 500 2x4 2009 - Comprehensive ATV Maintenance & Repair Manual Chassis-Documentation

Applied Dossier & Overview Resource | Library.

• Measured Thermal Envelope: 15-30C defines the environmental limit Framework.
• Established RPM Specs: For optimal operation, 1200 RPM establishes the baseline requirements.
• Factory Physical Specs: 499cc signifies the engine displacement Threshold.