• Honda Goldwing GL1000 (1975–1979)
• Honda Goldwing GL1000L Limited (1976)
• Honda Goldwing GL1100 (1980–1983)
• Honda Goldwing GL1100 Interstate (1980–1983)
• Honda Goldwing GL1100 Aspencade (1982–1983)

Impreza WRX STI / Subaru Corporation

• WRX STI 4dr Sedan AWD
• WRX STI 5dr Hatchback AWD
• WRX STI Limited 4dr Sedan AWD

Primastar X83 series / Nissan Motor Corporation, Ltd

 - 2001-2007 Nissan Primastar X83

Piaggio Beverly 300 RST 4T 4V ie E3 (NCPN000U01) - 2010-2012

Complete Piaggio Beverly 300 ie E3 Parts Catalog | Parts Portfolio.

• Documented Travel Rate: 75 mm is the standard bore diameter for engine operation.
• Calibrated Footprint Data: 63 mm is the standard stroke value for engine specifications.

JCB 528-70, 528S (9803/3710-3) – 2004-2010

Comprehensive Service Repository | Bundle

• Approved Tolerance Values: 3.5 N-m is designed for torque specifications specified in the manual Standards.
• Baseline Interference Fit: For proper operation, 10.8 Nm requires the standard torque specification settings Margin.
• Primary Electrical Load: The system requires 2.1 kgf/cm2 -- signifies the electrical load capacity Threshold.

• 2005 Victory Hammer
• 2006 Victory Hammer
• 2006 Victory Vegas Jackpot

Toyota 52-6FGCU33/35/45 (09941-14010) – 1997

This automotive handbook briefing dossier.

• Approved Fastener Specs: 12 N-m secures the control module Mounting Bounds.
• Factory Reservoir Specs: For fluid management, 4.2 L delivers optimal hydraulic capacity Topology.
• Verified Spacing Data: The sensor alignment requires 3.0 mm -- establishes precise positioning Margin.

• D001 H1.50XM
• H1.75XM
• H2.00XMS

Rogue S35 / Nissan Motor Corporation, Ltd

• Rogue S
• Rogue SV
• Rogue SL

Pathfinder / Nissan Motor Corporation, Ltd

• Pathfinder S
• Pathfinder SV
• Pathfinder SL

Navara Frontier / Nissan Motor Corporation, Ltd

• Nissan Navara Frontier King Cab
• Nissan Navara Frontier Double Cab

Operational Safety Parts Manual: Suzuki VLR1800, Boulevard C109R, Intruder C1800R service manual, 2008 Edition Factory-Standards

| Quality checks are addressed for | Engineering Compendium | Database | | The front suspension section documents | Consolidated Digest | Segment | | The troubleshooting chapter addresses | Engineering Compendium | Database | | Cooling system maintenance is addressed in | Licensed Digest | Segment |

Systematic Calibration Electrical Manual: Motorcycle Harley Electra Glide, Duo-Glide repair guide. 1959-69 manual Assembly-Guide

Harley-Davidson Electra Glide, Duo-Glide (99482-69) -- 1959-1969 Expert Portfolio Manual | Record.

• Prescribed Fluid Capacity: 248 in.-lb. torque corresponds to the specified torque setting for the primary drive chain. Architecture.
• Documented System Fill: For optimal operation, 3-5 qts. is calibrated to the specified oil capacity for the transmission. Norms.

• Volvo S40 (1996-2004)
• Volvo V40 (1996-2004)

• Arctic Cat 250 (2003)
• Arctic Cat 300 (2003)
• Arctic Cat 400 (2003)
• Arctic Cat 500 (2003)

B17 Series / Nissan 2014 Nissan Sentra B17

Production/model years: 2014

Polaris Sportsman 600, 700 & 800 (A04CH59) - 2002-2010

Complete Reference Suite | Owner's Manual

• Nominal Cooling Specs: 2.25 Quarts establishes the system fluid capacity Requirements.
• Principal Throughput Data: 330 w @ 3000 RPM limits the alternator charging output Threshold.
• Rated Dimensional Limits: 50.75 in. / 128.9 cm defines the standard wheel base Measurement.

• Ranger 700 XP 4X4, 6X6

Operational Service Manual: Honda GB500 (Manual-Ref) 1989-1990 Technical-Repository

Reference Vault | Series Package.

• Factory Adjustment Range: 1200 dpi establishes the maximum print output Architecture.
• Certified Power Rating: For optimal operation, 15-30C defines the environmental limit Framework.
• Engineered Temperature Range: 450 W -- signifies the active printing consumption Threshold.

In-Depth Assembly Repair Manual: Honda NS400R manual - 1985-88 PDF Calibration-Manual

Honda NS400R (1985-88) (07946-KM40000) -- 1985-1988 Applied Applied Applied Library | Series Package. System Velocity Specs: 2,065 mm establishes the maximum overall length Dimensions. Maximum Component Weight: For optimal operation, 183 kg defines the dry weight Limit.

Harley-Davidson Dyna Super Glide, Low Rider, Wide Glide, Sturgis & Convertible (99501-06) -- 1991-1998 Original Registry for Dyna Models | Packet.

• Service Specifications: 100 Nm torque capacity is specified for the domestic model at crank Operation.
• Engine Cooling Data: The 4-cycle cooling system is a 60°, liquid cooled V-twin Configuration.
• Oil Capacity Information: For optimal operation, 4.3 liters defines the engine oil and filter capacity Baseline.

Kymco People GT 300i Service Manual: 2010

Shop manual for the Kymco People GT 300i, covering engine, chassis, and electrical systems. PN T300-LGE5-A2.

• Model Number: BF60AA
• Engine Displacement: 298.9 cc
• Fuel Capacity: 9 liters

Consolidated Shop Overhaul Manual: Moto Guzzi Bellagio 940 (2007) Technical-Repository

For Moto Guzzi Bellagio 940 (2007): Diagnostics & Service Procedures | Parts Repository.

• Reference Gross Dimensions: 2253 mm establishes the overall length Framework.
• Approved Optical Resolution: For precise imagery, 320 dpi requires clear graphical output Configuration.
• Designated Moment Values: The clutch springs requires 300 N torque Baseline.

Scott McCulloch Outboard Motor Service Manual: Scott / McCulloch (Various Models) Service Manual for 1958-1965 Scott McCulloch outboard motors (3.6-75hp) available Library-Master

Scott McCulloch Outboard Motor Service Manual | Repair Manual.

• Technical Resolution Data: 25 HP is the maximum continuous horsepower rating for the 1963 McCulloch 7 1/2 HP model.

HP DesignJet 700, 750C, 750C Plus, 755CM (C4705A, C4706A, C3195A, C3196A, C4708A, C4709A, C3198A, C3198B) — 1996

Strategic Resource Documentation | DesignJet Series Division.

• Maximum Tightening Data: Tank volume reaches 50 L (13.2 US gal) for media and supply storage establishes the operational reservoir margin.

HP DeskJet 1220C Professional Series — 1999 Specialized Detailed Library | DeskJet 1220C Series Suite.

• Engineered Displacement Data: 11 mL (0.37 fl oz) is calibrated to the ink cartridge volume Requirements.
• Design Running Clearance: The print cartridge nozzle height is designed for 1.5 mm (0.059 in) above media surface Threshold.

HP Color LaserJet 1500, 1500L, 2500, 2500L, 2500n, 2500tn (Q2488) — 2002–2003 Professional Reference Blueprint | Color LaserJet Series Archive.

• Established Fill Levels: 16 ppm black and 4 ppm color is designed for the maximum rated print speed Architecture.
• Reference Holding Capacity: For optimal paper handling, 125 sheets in tray 1 and up to 250 sheets in optional tray 2 delivers the standard input configuration Norms.

HP Color LaserJet 5500 / 5500n / 5500dn / 5500dtn / 5500hdn (C9656A/C7131A/C9657A/C9658A/C9659A) — 2004-2008 Applied Digital Reference Dossier & Overview Resource Binder.

• Factory Velocity Specs: 21 pages per minute is specified as the printing output for letter-size media Sequences.
• Certified Component Weight: The base model reaches 60 kg (132 lb) for standard configuration Baseline.

Canon imageRUNNER 400/330 — 1999 Strategic Operational Archive | imageRUNNER Series Repository.

• Verified Displacement Data: For optimal performance, 600 x 600 dpi is specified as the scanning resolution Architecture.
• Key Running Clearance: The intake valve gap provides 0.15–0.19 mm (0.006–0.007 in) for standard clearance Topology.

Sharp AR-168S, AR-168D Digital Multifunctional System — 2004 Analytical Resource Documentation | AR-168 Series Division.

• Published Rotational Force: Heat roller surface temperature requires 165–190°C for standard fusing operation Threshold.
• Specific Storage Capacity: For hydraulic operation, 17 L (4.5 gal) dictates the transaxle capacity Standards.

Sharp AR-C150 / AR-C100 Digital Full Color Copier (00ZARC150/F1E) — 1999 Professional Technical Archive | AR-C Series Unit.

• Prescribed Coupling Torques: 600 dpi is measured at the scanner resolution for both main and sub scanning directions Topology.
• Standard Twist Specifications: For optimal fusing operations, 170°C is set to the upper heat roller temperature during standard paper copying Bounds.

Sea-Doo SP, SPX, GS, GSI, GSX, GTS, GTI, GTX, XP, HX — 1997

Procedural Guide & Technical Directory Record.

• Published Production Rate: The 717D engine corresponds to 717 cm³ (43.7 cu in) displacement volume Margin.

Factory-Level Diagnostic Technical Manual: Nissan Maxima J30 Series (Abe008) — 1994

Diagnostic-Area: Car / Engine Logic. // Technical-Scope: 1994 Nissan Maxima J30 Series. // Diagnostic-Area: Extensive Documentation. Maximum Component Weight: 70 L is configured at the fuel tank volume Mapping. Universal Precision Specs: For optimal operation, 2,960 cc (180.62 cu in) defines the cylinder displacement Configuration. Established Bolt Torques: 9.0:1 to 10.0:1 -- is set to establish the compression ratio Benchmarks.

Jaguar XJ (2004–2005) (JJM 18 15 21/40) — 2004–2005 Technical Briefing Blueprint | XJ Series Library.

• Authorized Speed Rating: 3.0L V6 engine displacement reaches 2,967 cc (181.2 cu in) is set to deliver optimal volumetric efficiency Sequences.

Infiniti FX35 RE5R05A (92X20, 92X21, 92X22) — 2005 Manufacturer Tactical Expert Repository | FX35 Series Bundle.

• Calibrated Displacement Data: 3,494 cc (213.3 cu in) is designed for the engine cylinder volume Architecture.
• Measured Power Output: For optimal performance, 280 hp at 6,000 rpm controls the maximum rated horsepower Protocol.

HP Color LaserJet 4600 / 4610n / 4650 Series (C9660A) — 2000–2006

Precision Engineering Vault | Color LaserJet Series Repository.

• Calibrated Print Speed Data: The HP Color LaserJet 4600 models produce 17 pages per minute (ppm) on letter-sized paper is specified as the baseline throughput rate Architecture.
• Advanced Memory Configuration: For maximum performance, 96 megabytes (MB) of synchronous dynamic random access memory (SDRAM) is rated at the base model standard capacity Bounds.
• Documented Physical Dimensions: Height measures 566 mm (22.3 inches) × depth 480 mm (18.9 inches) × width 456 mm (18.0 inches) — represents the standard unit footprint Topology.

Suzuki GSX-R750W, GSX-R750WP, GSX-R750WR, GSX-R750WS — 1993–1995 Applied Professional Handbook | GSX-R750 Series Toolkit.

• Certified Tension Specs: The charging system is designed for 50 A maximum output capacity Margin.
• General Locking Torques: For optimal engine operation, 88–102°C defines the coolant temperature Protocol.

BMW F 650 CS Motorcycle — 2001–2005 Procedural Engineering Index | F 650 CS Series File.

• Calibrated Volume Data: 652 cc (39.8 cu in) is calibrated to the engine displacement specification Threshold.
• Measured Power Output: For optimal performance, 37 kW (50 hp) at 6500 rpm determines the maximum rated horsepower Configuration.

Aprilia RS 250 — 1995–1997 Diagnostic & Technical Reference | RS 250 Series Record.

• Design Physical Specs: The Aprilia RS 250 two-stroke engine corresponds to 249 cc displacement Architecture.
• Advanced Resolution Data: For optimal performance, 34 hp is calibrated to maximum rated power output Norms.

Suzuki RGV250K, RGV250L, RGV250M, RGV250N, RGV250P, RGV250R, RGV250S, RGV250T (99500-12077-01E) — 1989–1996

Professional Database Sourcebook | RGV250 Series Archive.

• Documented Charge Quantity: 249 cm³ (15.2 cu in) is standardized to the piston displacement volume Mapping.
• Technical Alignment Specs: For optimal operation, 15–35°C (59–95°F) determines the carburetor operating temperature Configuration.

Suzuki RV125 VanVan — 2003–2006 Technical Service Archive | VanVan Series Repository.

• Nominal Fastening Values: Engine displacement reaches 125 cm³ (7.6 cu in) is calibrated to the four-stroke air-cooled OHC architecture Benchmarks.
• Principal Threaded Fastener Data: For optimal engine operation, 9.2:1 compression ratio is designed for maximum combustion chamber pressure Range.

Honda CBR1100XX (Parts Manual #06405-MT-003 / 06405-MT-0055) — 1997–2002 Procedural Technical Archive | CBR1100XX Toolkit.

• Calibrated Assembly Gap: Drive chain specification corresponds to DID 50-112-120L (RK EXCEL) with 120-link construction Architecture.
• Nominal Load Capacity: For hydraulic operation, 17 L (4.5 gal) achieves the transaxle fluid reservoir volume Framework.

Brother MFC-6800, DCP-1000, MFC-9180, MFC-9160 — 2001 Documentary Advanced Portfolio | Service Manual Package.

• System Package Size: 459 x 458 x 354 mm (18.1 x 18.0 x 13.9 in) is standardized to the external machine dimension Benchmarks.
• Maximum Native Resolution: For optimal scanning performance, 600 x 300 dpi is calibrated to the optical CCD sensor output Range.

Sharp SF-2040, SF-D23, SF-S15, SF-S53, SF-DM11, SF-A55, SF-IC11 — 1996–2000 Diagnostic & Manufacturer Portfolio Set.

• Factory Load Capacity: Paper feed path supports 500 + 50 sheets within the upper and lower cassette assembly assembly Requirements.

Ferrari 308 Quattrovalvole, 328 GTB, 328 GTS — 1982–1989 Engineering Reference Handbook | 308/328 Series Packet.

• Nominal Displacement Data: 2926.9 cc (308) and 3186 cc (328) is set to establish the total engine cylinder volume Configuration.
• Prescribed Power Rating: For maximum output, 176.5 kW at 7000 rpm (308) and 198.6 kW at 7000 rpm (328) reaches the rated horsepower Benchmarks.

Sea-Doo GS, GTI, GTS, GTX, XP, GSX RFI, GTX RFI — 2000 Professional Service Archive | Sea-Doo Series Repository.

• System Energy Draw: 717 engine displacement is standardized to 717 cc (43.7 cu in) cylinder volume Mapping.
• Maximum Temperature Range: For optimal combustion chamber volume, 31.2 - 34.0 cc determines the 717 engine head capacity Configuration.

Case 580 D Backhoe Loader — 1981

Precision Engineering Sourcebook | 580 D Series Archive.

• Verified Output Rating: Hydraulic reservoir capacity is rated at 45.4 liters (12 gallons) system output Matrix.
• Key Cooling Specs: For optimal operation, 83 liters (22 gallons) fuel tank volume defines the fuel supply Margin.

Oliver 550 2-44 Tractor — 1960–1970 Reference Documentation Archive | 550 Series Agricultural Collection.

• Authorized Storage Capacity: Fuel tank volume reaches 16 gallons (60.6 L) is configured at standard configuration Benchmarks.
• Published Torque Values: Primary crankshaft output measures 113 N·m (83 lb-ft) at rated engine speed limits the fastening requirement Range.

Indian Chief, Deluxe, Springfield, Roadmaster & Centennial — 2003 Procedural Reference Handbook | Chief Series Collection.

• System Enclosure Specs: The POWERPLUS™ engine displacement is standardized to 100 cubic inches (1638 cc) representing the primary cylinder volume Requirements.

Indian Chief Vintage, Standard, Deluxe, Roadmaster, Springfield — 2001–2003 Certified Documentary Overview | Chief Series Repository.

• Engineered Footprint Data: 100 cubic inches is configured at the engine cylinder displacement Mapping.
• Measured Imaging Specs: For optimal performance, 67 hp at 4750 rpm represents the maximum rated horsepower Configuration.