Yamaha XVS950 V Star 950 (LIT-11616-22-60) — 2009–2014 Full Coverage: XVS95Y, XVS95YC, XVS95CTY, XVS95CTYC, XVS95A, XVS950, XVS950A, V Star 950, V Star 950 Tourer.

Detailed Service Training Manual: Jaguar Mark VII & XK 120 (XK120, XK140, XK150) Service Manual & Repair Guide, covers 1945-1960 Repair-Index Jaguar Mark VII & XK 120 (Publication C4085-91017) | Mark VII and XK 120 Collection.

• Engine Data: 3L Twin Overhead Camshaft specifies the primary engine configuration.
• Gearbox Ratios: For optimal performance, 3.375:1 represents the reverse gear limit.
• Torque Specifications: The engine block requires 160 @ 5,200 r.p.m. to ensure proper assembly.

KTM 250 SX-F EU, 250 SX-F USA, and 250 XC-F USA (2013) Owner's Manual Definitive Repair & Service Guide | Owner's Manual Segment.

• Technical Resolution Data: 497 mm is the standard spring length for the 250 SX-F EU Framework.
• Specific Temperature Range: For optimal operation, -25 to -45C defines the coolant antifreeze limit Framework.

2013 KTM 450 SX-F / XC-F Service Manual Definitive Repair & Service Guide for KTM 450 SX-F EU, 450 SX-F EU Factory Edition, 450 SX-F USA, 450 SX-F USA Factory Edition and 450 XC-F USA Sports Motorcycles – Owner's Manual 2013 Field-Reference | Owner's Manual Compendium.

• Published Technical Data: 449.3 cm³ establishes the engine displacement capacity.
• Specific Chassis Specs: WP Suspension Up Side Down 4860 MXMA CC defines the fork architecture.

Yamaha Grizzly 550 (LIT-11626-27-22) - 2013 Edition Technician-level documentation for your ATV. This manual details safety, operation, and maintenance procedures. Owners Manual Set.

• Measured Deviation Limits: 558 cm³ establishes the engine displacement for optimal power output Configuration.
• Fundamental Energy Draw: For efficient operation, the ATV is equipped with a 12 V, 18.0 Ah battery system Requirements.

Arctic Cat Prowler XTZ 2009 (Part Number N/A)

Engineering & Engineering Transmission | Series UTV.

• Nominal Net Mass: 564 kg (1243 lb).
• Principal Scan Resolution: 25.4 cm (10 in.) for front and rear suspension travel.
• Rated Rotational Force: 20 ft-lb for front brake torque.

Suzuki VZ1500 Boulevard M90 Owner's Manual: 2009-2014 Transmission-Guide This owner's manual is your primary source for operating and maintaining your Suzuki VZ1500.

• Factory Specifications: VIN 170799 ensures accurate model identification for all procedures.
• Essential Maintenance Intervals: Recommended service intervals are clearly defined for optimal performance.
• Key Operating Procedures: Step-by-step guidance covers starting, shifting, and parking the motorcycle.

2014 Can-Am Spyder F3, RT, RS & ST (P/N 219 702 685) - Maintenance & Repair Procedures This Service Manual covers the following BRP made 2014 Can-Am Roadsters Spyder RT models.

• Technical Data: 11 N•m (97 lbf•in) specifies the tightening torque for the clutch cover retaining screws.
• Performance Metrics: For lubrication, engine oil is applied to the clutch hub teeth.

Unified Assembly Operator's Manual: Bike Ducati Hypermotard SP manual PDF, 2013 edition Overhaul-Reference Ducati Hypermotard SP (HYM.06) -- 2013 Engine Control Unit | Digital Bundle.

• Approved Assembly Torques: 10 Nm ±10% signifies the specified fastener tightness for battery connections.
• Factory Liquid Volume: N/A for this system context.

Polaris Hawkeye 2x4 / 4x4 (A06LB27AA / A06LD27AA) - 2006

Polaris Hawkeye 2006 ATV - Enhanced Service Procedures | Series Polaris Bundle.

• Prescribed Footprint Data: Length is 74 in. / 188 cm.
• Standard Imaging Specs: Dry Weight is 525 lbs. / 238 kg for 2x4 and 550 lbs. / 250 kg for 4x4.
• Core Tightening Data: Published Bolt Torques are 27 ft. lbs. (37Nm) up to 80 ft. lbs. (108 Nm).

Polaris Sportsman 500 6x6 (A04CL50AA, A05CL50AA) -- 2004-2005 Precision Compendium | Repository

• Engine Specifications: 499cc Fuji 4-stroke, single cylinder, liquid-cooled engine provides ample power for demanding tasks.
• Transmission Lubrication: Uses Polaris AGL Gearcase Lubricant (PN 2873602) for smooth shifting and protection.

2009 Polaris Sportsman 550/850 XP (9921973) | OEM-Grade Configuration Training Manual: ATV Complete Owner´s Manual: Polaris Sportsman 550 XP, 550 XP EPS, 850 XP, 850 XP EPS (2009) Repository | Sportsman 550 XP (9921973) | Sportsman 850 XP (9921973) | 2009 | ATV | Owner's Manual. Engineered Reservoir Specs: The engine oil capacity is 2 qts. (1.9 l). Defined Displacement Data: The engine displacement is 549.7 cc. Standard Dimensional Tolerance: The wheelbase is 53 in. (134.6 cm). Principal Climate Parameters: The cooling system capacity is 2 qts. (1.9 l). Advanced Physical Specs: The alternator output is 490w @ 1350 RPM/Peak 630w. Primary Fluid Capacity: The fuel capacity is 5.25 gal. (20 l) (XP).

2009 Polaris Sportsman XP 850 / XP 850 EPS Complete Service Manual – Factory-Grade Maintenance & Repair Guide for 2009 2009 Polaris Sportsman XP 850 / XP 850 EPS // Year-Coverage: 2009 / Operational-Scope: ATV / Year-Coverage: Comprehensive Maintenance Logic.

• Calibrated Installation Footprint: 83.25 in. / 211.5 cm establishes the overall vehicle dimensions Framework.
• System Maximum Resolution: For optimal operation, 50.75 in. / 129 cm defines the maximum height Capability.
• Published Twist Specifications: 53 in. / 135 cm is the standard wheel base Measurement.

2009 Polaris Ranger RZR (9921878) - Precision Maintenance & Troubleshooting Guide Polaris Ranger RZR / Ranger RZR "S" Collection | Assembly.

• Nominal Fit Tolerances: 0.00276" ± 0.00079" (0.07 ± 0.02 mm) establishes the standard oil clearance for the camshaft.
• Principal Consumption Data: For optimal engine operation, 6500 ± 200 RPM defines the maximum engine operating speed Threshold.
• Rated Thermal Limits: The cooling system capacity is 4.8 qts. / 4.5 liters Requirements.

1972-1987 Polaris Master Service Manual: Colt, Charger, Mustang, TX, Indy & Main Series Snowmobiles Comprehensive Master Service Manual: Polaris Colt, Charger, Mustang, TX, Indy & Main Series Snowmobiles (1972-1987) Information-Suite | Series Service Manual Toolkit.

• General Specs: Track Length: 108" establishes the maximum track length Specification Parameters.
• Specific Dimensions: For a secure fit, 33" defines the height without windshield Framework.

Polaris Phoenix & Sawtooth 200 (2006) Comprehensive Service Manual: Polaris Phoenix 200 & Sawtooth 200 2006 - Comprehensive Service Manual for ATV Maintenance and Repair Repository Covers Phoenix & Sawtooth 200 models with detailed procedures for engine, fuel, electrical, drivetrain, and body systems | ATV Service Manual Portfolio

• Design Data: 196cc engine displacement signifies the core power plant capacity.
• Verified Procedures: 65 x 59 mm bore and stroke establish the engine's internal dimensions.

Polaris 2006-2008 FS/FST Snowmobiles (9921066) | Original Documentary Overview. Set

• System: Cold Start Limits: 145 F (63 C) is calibrated to 160 F (71 C) Mapping
• Maximum: Velocity Specs: 8000 RPM is designed for Configuration
• Measured: Enclosure Specs: 48 inches is governed as Benchmarks
• Critical: Fastener Specs: 50 ft-lb is established by Range

2007 Polaris Ranger 500 (2007) -- Complete Service Manual Service Manual | Series Polaris Ranger Toolkit

• Maximum Velocity Specs: 113 in. / 287 cm establishes the overall vehicle length Configuration.
• Universal Component Weight: For general operation, 1105 lbs. / 502 kg defines the dry weight Parameter.
• Fundamental Feed Speed: Ground Clearance is 11.5 in. / (29 cm) between the chassis and the ground Surface.

Yamaha FZS600 (FZS600) - 1998-2001 Fazer Service Manual Documentation | Archive Bundle

• Design Specifications: 599 cm3 defines the engine displacement.

Yamaha TDR 250 (3CK-28197-20) Manual: 1988 edition Yamaha TDR 250 Service Manual | 1988 edition Toolkit.

• Verified Component Weight: 153 kg (337 lb) establishes the vehicle's curb weight when equipped with a full tank of fuel.
• Engineered Precision Specs: For optimal operation, 9.0:1 defines the compression ratio framework.
• Principal Bolt Torques: 25 Nm (2.5 m*kg, 18 ft*lb) -- signifies the maximum torque for the kick axle nut specification.

2008 Kawasaki KLR650 (KL650E8F) Motorcycle Service Manual | Repair Manual Folder

• Design Generation Capacity: 651 cm3 is the engine displacement Architecture.
• Technical Resolution Data: 20.4 PS signifies the maximum horsepower output Protocol.
• Standard Amperage Specs: 14 Ah establishes the battery capacity Norms.

Kia Optima (2006-2008) (0702-kia-optima-2006-2008) - Service Manual For Optima LX, EX, SX: Diagnostics, repair, and maintenance.

• Engine Specifications: 4 cylinders, 2359cc displacement, 10.5:1 compression ratio.
• Valve Timing: Intake opens 11°-34° ATDC/BBDC, closes 22°-67° ABDC; Exhaust opens 34° BBDC, closes 10° ATDC.

SsangYong Rodius (Diesel Engine) 2004-2007 Service Manual Technical reference spanning SsangYong Rodius models. Includes detailed diagnostics and repair procedures. Toolkit.

• General Information Category: General specifications are rated at 220 / 6000 ps/rpm establishes the engine's maximum output Performance.
• Technical Resolution Data: Engine specifications provide the core operational data Topology.

Sea-Doo SP, SPX, GS, GSI, GSX, GTS, GTI, GTX, XP, HX — 1997

Procedural Guide & Technical Directory Record.

• Published Production Rate: The 717D engine corresponds to 717 cm³ (43.7 cu in) displacement volume Margin.

Yamaha YZ250F, YZ250FR (5UL1, 5UL2, 5UL4) — 2003 Detailed Technical Reference | YZ250F Series Library.

• Calibrated Displacement Data: Engine cylinder volume is measured at 249 cm³ (8.76 Imp oz, 8.42 US oz) for the rated displacement Architecture.
• Rated Cooling Capacity: For optimal temperature management, 0.9 L (0.79 Imp qt, 0.95 US qt) represents the total coolant system volume Standards.

Suzuki RGV250K, RGV250L, RGV250M, RGV250N, RGV250P, RGV250R, RGV250S, RGV250T (99500-12077-01E) — 1989–1996 Professional Database Sourcebook | RGV250 Series Archive.

• Documented Charge Quantity: 249 cm³ (15.2 cu in) is standardized to the piston displacement volume Mapping.
• Technical Alignment Specs: For optimal operation, 15–35°C (59–95°F) determines the carburetor operating temperature Configuration.

Commercial Assembly Installation Manual: Backhoe Loader Case 580 Super K (580SK) Construction King backhoe loader tractor service maintenance manual, covers 1991-1997 Knowledge-Base Documentary Reference Handbook | Case 580SK Super K Construction King File

• Nominal Wattage Specs: 1500 W establishes the active printing consumption Baseline.
• Principal Generation Capacity: For optimal operation, 50-60 GPM defines the environmental limit Requirements.
• Rated Technical Specs: 450 N-m -- signifies the active printing consumption Benchmarks.

Fordson Dexta & Super Dexta — 1958–1962 Technical Sourcebook | Dexta Series Dossier.

• Maximum Load Capacity: Engine displacement reaches 2062 cc (125.8 cu in) is rated at the base specification Architecture.
• Authorized Environmental Range: For safe operation, 0–40°C establishes the ambient temperature tolerance Framework.

Yamaha YZF-R6 (5SL-A7400-70) – 2004 Yamaha YZF-R6 (5SL-A7400-70) – 2004

• Published: Throughput Data: 14 T for the drive sprocket establishes the primary ratio for acceleration.
• Specific: Angular Speed: The transmission gears are configured at a 1.894:1 ratio for the 1st gear.
• Integral: Package Size: The 5SL-A7400-70 transmission gear set requires a total of 2.6 L of engine oil for proper lubrication.

Yamaha WR400F(N), WR426F(N) — 1998–2002

Manufacturer Compendium | WR Series Section.

• Basic weight reaches 121.5 kg across the model lineup

Yamaha YZ250F(S) (5XC1/5XC2/5XC4) — 2004 Precision Diagnostic Collection | YZ250F Series Manual Archive.

• Approved Wattage Specs: 249 cm³ (8.76 Imp oz, 8.42 US oz) is specified as the engine displacement Architecture.
• Baseline Generation Capacity: For optimal performance, 7.0 L (1.54 Imp gal, 1.85 US gal) represents the maximum fuel tank capacity Matrix.

Yamaha TT-R125(P), TT-R125LW(P) — 2002 Consolidated Engineering Blueprint | TT-R Series Library.

• Documented Clearance Data: 0.08–0.12 mm (0.0031–0.0047 in) is calibrated to the intake valve cold lash setting Specifications.
• Measured Power Output: For optimal off-road performance, 20.9 kW (28 hp) net flywheel horsepower is specified as the standard engine Framework.

Suzuki DR500S (1981–1982) Applied Reference Compendium | DR500S Series Repository.

• Approved Fastening Values: The cylinder head requires 23—27 N·m is measured at standard bolt tension Margin.
• Baseline Threaded Fastener Data: For optimal assembly, 8—10 N·m represents the cylinder head cover bolt specification Protocol.

Yamaha PW80(T) — 1991–1994 Certified Diagnostic Primer | PW80 Series Kit.

• Established Environmental Range: 4.9 L (1.08 Imp gal, 1.29 US gal) is measured at the fuel tank maximum capacity Architecture.
• Operational Speed Rating: For optimal engine performance, 79 cm³ (2.78 Imp oz) is set to the cylinder displacement Norms.

Yamaha PW50(R) — 2002 Applied Reference Portfolio | PW50(R) Series Repository.

• Documented Fluid Capacity: Engine oil tank capacity is standardized to 0.3 L (0.26 Imp qt, 0.32 US qt) Sequences.
• Measured System Fill: For proper fuel operation, 2.0 L (0.44 Imp gal, 0.53 US gal) is rated at the tank volume Baseline.

New Holland LS140, LS150 Skid Steer Loader — 1990s–2000s Mechanical Industrial Portfolio | Final Drive Collection.

• Reference Cycle Rate: The boom raise cycle time achieves 3.5 seconds for the LS140 model and 3.3 seconds for the LS150 Rotation Data, representing standard hydraulic performance specifications.

Cub Cadet Garden Tractors 1340, 1535, 1541, 1860, 1862, 1782, 1882, 2082, 2182 — 1990–1991 Systematic Technical Resource | Garden Tractor Series Repository.

• Engineered Clearance Data: Intake valve gap is configured at 0.10–0.15 mm (0.004–0.006 in) cold engine Mapping.
• Measured End Play: Crankshaft journal bearing clearance is established at 0.05–0.13 mm (0.002–0.005 in) Configuration.

KYMCO Agility 50 — 2004–Present Strategic Database for Agility 50 Dossier.

• Published Production Rate: Engine displacement reaches 49.5 cc is specified as the cylinder volume Bounds.
• Specific Physical Specs: For optimal performance, 3.5 kW at 7500 rpm is rated at the maximum power output Topology.

Komatsu PC200LC-7L & PC220LC-7L (CEBM005802) — 2002 Specialized Technical Database | Hydraulic Excavator Series Collection.

• Documented Resolution Data: Engine displacement of 5.883 L (5,883 cc) is standardized to the SAA6D102E-2 four-cylinder configuration Sequences.
• Technical Output Density: Maximum flywheel horsepower reaches 106.7 kW at 1,950 rpm (143 HP rated output) Baseline.

Komatsu PC27MRX-1, PC30MRX-1, PC35MRX-1, PC40MRX-1, PC45MRX-1 (11574+, 10001+, 3930+, 1001+, 1001+) — 2003 Applied Professional Repository | MRX Series Catalog.

• Calibrated Displacement Data: 1.490 liters (1,496 cc) is measured at the 3D84E-3 engine cylinder volume Specifications.
• Factory Power Output: 20.6 kW at 2,500 rpm represents the maximum rated horsepower Framework for PC30MRX-1 configuration.

2003 Suzuki SV1000 Service Manual 2003 Suzuki SV1000 (99501-39540-01E) -- 2003 Supplementary Service Manual | Suzuki Motor Corporation.

• Calibrated Addressable Resolution: 1200 dpi establishes the maximum print output Architecture.
• System Bolt Torques: is standardized to 23 N-m for handlebar clamp bolts Norms.

Suzuki XF650 Freewind — 1997–2001 Manufacturer Blueprint Directory | Freewind Series Division.

• Published Climate Parameters: Operating temperature range corresponds to −10–40°C (14–104°F) environmental Margin.
• Specific Processing Speed: For optimal engine performance, 644 cc displacement sets the CCM engine architecture Protocol.

Ducati 900 SS Supersport (ZDM) — 2001 Technical Service Archive | Supersport Series Repository.

• Calibrated Displacement Data: 904 cm³ (55.2 cu in) is specified as the engine cylinder volume Architecture.
• Measured Power Output: For optimal performance, 58 kW (79 hp) at 7,500 rpm represents the maximum rated horsepower Framework.

Arctic Cat Tigershark Montego, Montego Deluxe, Daytona, Barracuda — 1994 Comprehensive Technical Archive | Tigershark Series Watercraft Repository.

• Published Component Weight: The aluminum mounting bracket is established at 0.45 kg (1.0 lb) fastening Bounds.
• Specific Precision Specs: For optimal carburetor function, 1.25 mm defines the fuel inlet needle valve seat Topology.

Aprilia Leonardo 125 (Type 120), Leonardo 150 (Type 154), Scarabeo 150 (Type 154S), Scarabeo 175/180 (Type 177S) — 2001 Digital Precision Sourcebook | Rotax Engine Record.

• Verified Weight Data: The Leonardo 125 engine is rated at approximately 27 kg dry weight, while Scarabeo models achieve 29 kg dry weight Standards.
• Engineered Net Mass: For optimal performance, the 177S Scarabeo model engine establishes 176.3 cm³ cylinder displacement with 12 kW maximum power output Architecture.

Ski-Doo 1985 Shop Manual: Bombardier Ski-Doo Documentary Dossier | Snowmobile Series Segment.

• Reference Maximum Resolution: 22 Nem (16 lbfeft) is specified as the standard engine mounting torque Architecture.
• Approved Assembly Torques: Engine support nuts are designed for 37 Nem (23 lbfeft) to provide consistent structural fastening Mapping.
• Designated Capacity Limits: Cylinder head installation requires cross torque of 21 Nem (15 lbfeft) governs the combustion chamber assembly Configuration.

Honda ATC250R — 1985–1986 Operational Technical Repository | ATC250R Series Archive.

• Calibrated Displacement Data: 246 cm³ (15.01 cu.in) is specified as the engine cylinder volume Architecture.
• System Bore Specification: The cylinder bore measures 66 mm (2.60 in) at standard measurement tolerance Topology.

Evinrude/Johnson Outboard Motor Service Manual: 1.25hp, 2.5hp, 4hp, 6hp, 9.5hp, 15hp, 20hp, 25hp, 35hp, 40hp, 50hp, 55hp & 60hp Factory Repair Manual 1971-1989 Specification-Guide Outboard Motor Manual: Evinrude/Johnson Outboard Motor (1971-1989) // Outboard Motor Manual: Outboard Motor / Engine Logic // Outboard Motor Manual: Specifications and Diagrams.

• Measured Play Limits: Piston ring gap is 0.010" (0.254 mm) at the tip of the piston.
• Fundamental Electrical Specs: For optimal operation, 12 volts governs the standard electrical system output.

Yamaha YFM700 Raptor 700R — 2006–2008 Engineering Consolidated Library | Raptor 700R Series Suite.

• System Climate Specs: 686 cc (41.86 cu in) is set to the engine cylinder displacement Mapping.
• Maximum Heat Dissipation: For optimal performance, 9.20:1 specifies the compression ratio Configuration.

Kawasaki KFX 700V Force (KSV700) Service Manual: 2004-2009 PDF Specialized Documentation | KFX 700V Force Binder

• Measured Cooling Specs: 2.5 L (2.64 US qt) represents the total coolant capacity Requirements.
• Established Throughput Data: 49.4 PS @6 500 r/min signifies the maximum engine horsepower Threshold.
• Factory Dimensional Limits: 1985 mm overall length defines the vehicle's external dimensions Benchmarks.