Search Results for: mazda mpv 2000 manual (4,865 results)

Gilera Nexus 500 Workshop Manual (633309) — 2002-Present Library-Master Gilera Nexus 500 Service Manual | Nexus 500 Record.

• Published Voltage Specs: 460 cm³ (28.1 cu in) corresponds to the engine cylinder displacement Architecture.
• Measured Thermal Limits: For peak efficiency, 29.5 kW at 7500 rpm sets the maximum rated power output Norms.
• Approved Rotational Force: 43 N·m at 5500 rpm is rated at the crankshaft torque specification Bounds.

Keeway F-act Matrix 50 — 2006 Consolidated Engineering Portfolio | F-act Series Suite.

• Engineered Tightening Data: 49.8 mL is configured at the engine displacement requirement Mapping.
• Certified Fill Levels: For optimal performance, 5.2 L produces the standard fuel tank capacity Configuration.

Keeway Hurricane 50 — 2006 Professional Reference Dossier | Hurricane 50 Series Collection.

• Approved DPI Rating: Engine cylinder displacement achieves 49.8 mL as specified for two-stroke air-cooled architecture Architecture.
• Baseline Fastening Values: Cylinder head fasteners establish torque specifications of 15–18 N·m (10.8–13.0 lb-ft) for secure clamping Norms.

1996 Chevrolet Camaro (10275780 A) — 1996 Your Chevrolet Owner's Manual | Camaro Series Toolkit.

• Calibrated Displacement Data: 231 cubic inches (3.8 liters) corresponds to the baseline V6 engine cylinder capacity Architecture.
• System Volume Data: For optimal cooling performance, 12.5 quarts (11.8 liters) is calibrated to the engine coolant system reservoir capacity Norms.
• Critical Fuel Capacity: The fuel tank determines 15.5 gallons (58.7 liters) as the maximum fuel storage volume Protocol.

BMW 745i / 745Li (01 40 0 156 097) — 2001 Documents BMW 745i and 745Li service procedures, covering comfort and convenience features, and driving systems for optimal vehicle operation. Ref: 01 40 0 156 097

• Engine Specifications: 268.4 cu in (4398 cc) displacement correlates to the engine volume Architecture.
• Compression Ratio Data: For optimal combustion, the 10.5:1 compression ratio applies to all eight engine cylinders Norms.
• Fuel Tank Capacity: The fuel tank volume reaches 23.2 US gallons (88 litres) including the reserve supply configuration Standards.

Komatsu PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, PC250LC-6 Excavator — 1996 Precision Engineering Repository | Excavator Series Collection.

• Reference Output Density: 99 kW (133 HP) at 2,200 rpm is standardized to the maximum rated horsepower Framework.
• Integral Rotational Force: For optimal digging performance, 490 N·m (50 kgm) at 1,600 rpm is rated at peak engine torque Threshold.

Fiatallis FR140.2 Wheel Loader — 1998 Tactical Documentation Portfolio | FR140.2 Series Repository.

• Designated DPI Rating: Unable to extract — document pages are blank throughout Sequences.
• Primary Fastening Values: Unable to extract — no readable specification tables found Baseline.

Fiatallis FD80, FD80LGP, D80 & D80LGP Crawler Dozer — 1998 Industrial Professional Sourcebook | FD80/D80 Series Edition.

• Design Net Mass: The FD80 standard model is measured at 18,700 kg (41,225 lb) operating weight Margin.
• Measured Scan Resolution: For loader bucket capacity, 1.6 m³ (2.1 cu yd) represents the primary digging volume Protocol.

Ariens 22000 Series Sno-Thro (922018–922025) — 1969–1978 Licensed Strategic Vault | 22000 Series File.

• Calibrated Threaded Fastener Data: Blade attachment bolts require M10 × 1.5 mm (10 mm diameter) fastening Benchmarks.
• Measured Fluid Levels: For optimal operation, 4.7 L (1.2 US gal) defines the fuel tank capacity Range.

Ford 5610 (1981-1993) (Parts List)

Parts Manual for Ford 5610 4 Cyl Agricultural Tractor | Agricultural Tractor Series. Replacement Parts Catalog.

• Measured Feed Speed: 12 part numbers are required for standard assembly Sequences.

Ford 6610 4 CYL AG Tractor Parts Manual: Tractor Complete Parts Manual for Ford 6610 4 CYL AG Tractor - 10 Series Chassis-Documentation Part Number: 6610 (1981-1993) // Coverage Scope: All Models // Procedure Type: Parts List Established Technical Resolution Data: 1200 dpi establishes the maximum print output Architecture. Operational Print Quality: For optimal operation, 1200 dpi defines the environmental limit Framework. Essential Assembly Torques: 32 Nm -- signifies the active printing consumption Threshold.

Ford 3930 Tractor (1990-1999) (All-Purpose Parts Catalog) Front Wheel & Hubs | Standard | Wheel. Maximum Mass Specs: 16 " Rim x 8 " Rim; 10 " Rim x 24 " Rim; 8 " Rim x 20 " Rim Universal Gross Dimensions: 10 " diameter x 24 " length Fundamental Torque Data: 7 / 16 " - 14 x 1-1/4 " Bolts

Ford 8730 (8730) - 1990-1993 Tractor Ford 8730 Parts Catalog, Manual | Part Numbers & Diagrams

• Prescribed Threaded Fastener Data: 16 Bolts are required for the bolt assy.
• Documented Fluid Levels: 2 quarts of oil are documented for the pump and pan

Canon BJ-W9000 (QY8-1373-000) — 2001 Precision Engineering Reference | BJ-W9000 Series Repository.

• Verified Unit Dimensions: Maximum printing resolution reaches 1200 × 600 dpi establishes the horizontal/vertical addressability Bounds.
• Measured DPI Rating: For optimal photographic output, 1200 × 600 dpi yields the bi-directional print capability Topology.

Canon CLC5100 Series — 2003 Systematic Technical Database | CLC5100 Series Collection.

• Calibrated Print Speed Data: 51 cpm (A4, single-sided mode, plain paper, standard gloss) is specified as the maximum copying output Architecture.
• Principal Volume Specification: For toner supply, 750 g (C, M, Y toner) is configured at the hopper capacity Baseline.

Aprilia Pegaso 650 — 1997 Detailed Commercial Handbook | Pegaso Series Repository.

• Design Tolerance Values: 651.88 cc (39.8 cu in) is measured at the engine cylinder volume Architecture.
• Advanced Interference Fit: Bore and stroke represents 100 mm / 83 mm dimensions establish the piston configuration Protocol.

Cagiva Mito 125 & Evolution 500 Workshop Manual: Download repair guide 1994-2008 Logic-Archive Cagiva Mito 125 & Evolution 500 (68543) -- 1994-2008 Original Catalog | Collection.

• System Scan Resolution: 1200 dpi establishes the maximum print output Architecture.
• Core Tightening Data: For optimal operation, 15-30C defines the environmental limit Framework.

• Ducati Monster S2R 1000 (2006-2008) — 2006-2008 Technical Repository // S2R 1000 / Monster S2R / 1000 Portfolio (Technical-Archive).

• Advanced Parameter: Manufacturer-specified valve clearance establishes the desmodromic actuation timing.

• Core Limit: Factory-defined lubricant viscosity signifies the thermal protection threshold for the L-twin assembly.

Sea-Doo GT, GTI, GTX, RXP, RXT (2007) — 2007 Detailed Technical Archive for Watercraft Service.

• Maximum Print Rate: Fuel rail fastener torque is established at 10 N•m (89 lbf•in) for secure retention Matrix.
• Universal Dimensional Limits: For intercooler antifreeze protection, 200 mL (6.76 oz) reaches the recommended fill volume Standards.

Ducati 749S — 2003–2006 Specialized Technical Vault | 749S Series Repository.

• Engineered Component Weight: The complete crankshaft assembly is specified as the primary rotating mass Architecture.
• Defined Precision Specs: Engine displacement yields 748 cc (45.7 cu in) representing the cylinder volume Threshold.

KYMCO Mongoose/KXR 90 & 50 — 2003 Certified Commercial Documentation | Mongoose/KXR Repository Bundle.

• Calibrated Displacement Data: 89.9 cc (5.49 cu in) is specified as the engine cylinder volume Architecture.
• Advanced Power Output: For optimal performance, 6.3 ps at 6500 rpm represents the maximum rated horsepower Framework.

Triumph 1945-1955 Speed Twin / Thunderbird / Tiger Workshop Manual Parts-Reference Covers Triumph Speed Twin, Thunderbird, Trophy & Tiger models with engine, gearbox, electrical, and chassis procedures. Ref: 99-0836 | Classic British Motorcycle Collection. Unit.

• System Displacement Data: 498 cc (30.5 cu in) is specified as the engine cylinder volume Sequences.
• Core Power Output: 27 bhp at 6,300 rpm requires the maximum rated horsepower Baseline.
• Specific Compression Ratio: The cylinder head specifies 7:1 compression for standard combustion Requirements.

Triumph T120R Bonneville, TR6R Tiger, TR6C Trophy, TR6RV Tiger, T120RV Bonneville — 1970–1973 Precision Engineering Vault | 650cc Twin Series Repository.

• Engineered Form Factor: Bore and stroke measures 71 × 82 mm (2.8 × 3.2 in) is calibrated to the cylinder dimensions Sequences.
• Measured Output Quality: Maximum torque reaches 36.5 ft·lbs at 6250 rpm represents the crankshaft peak performance Baseline.

Yamaha Wolverine 350 YFM350FXN, YFM350FXP (LIT-11616-14-02, LIT-11616-15-07) — 2001–2002 Expert Documentation Catalog | Wolverine 350 Kit.

• Certified Displacement Data: Engine cylinder volume reaches 349 cc is designed for the YFM350FX four-stroke architecture Architecture.
• Designated Valve Clearance: For optimal cold operation, intake valve gap measures 0.06–0.10 mm (0.002–0.004 in) controls precise combustion Norms.

KTM 250 SX, 300 SX, 380 EXC, 250 MXC, 300 MXC, 380 MXC (3206004-E) — 1999–2003 Comprehensive Index & Reference Manual | Engine Series Repository.

• Calibrated Displacement Data: 249 ccm (250 SX), 297 ccm (300 SX), and 368 ccm (380 EXC) is specified as the liquid-cooled single-cylinder engine cylinder volume Matrix.
• Measured Torque Output: For primary sprocket fastening, 150 N·m (110 ft·lb) provides the crankshaft main bearing retention force Standards.

Sachs XTC 125 4-Stroke (P00 677 008 06 02 000) — 2003 Technical Mechanical Archive | XTC 125 Series Suite.

• Measured Piston Displacement: The cylinder bore reaches 57.000–57.015 mm at Native Resolution framework for engine block construction Sequences.
• Fundamental Clamp Forces: Primary transmission ratio is rated at 3.5:1 for the countershaft engagement Baseline.

Yamaha YFM35FGIW Grizzly 350 4WD IRS — 2007 Procedural Engineering Handbook | Grizzly 350 Series Section.

• Calibrated Displacement Data: 348 cm³ (21.2 cu in) is specified as the engine cylinder volume Requirements.
• Measured Compression Ratio: The engine specifications indicate 9.2:1 for standard combustion chamber pressure Threshold.

• Nissan R33 Series (R33-GTR) — 1993–1998 Vault Identifier ❱ RB26DETT, RB25DET, RB25DE, RB20E Engine Repository (Technical).

• Technical Displacement: 2568cc defines the RB26DETT high-performance architecture.

• Specific Compression: 8.5:1 is required for stabilized turbocharging sequences.

Definitive Workshop Reference Manual: Diesel Engine Kubota 05 series diesel engine workshop manual Service-Portfolio Kubota 05 Series (01090SL) -- 1996 Systematic Catalog & Specification File.

• Documented Charge Quantity: 5.1 L is standardized to standard fluid requirements Mapping.
• Technical Alignment Specs: For optimal operation, 4.0 L determines the fluid capacity Configuration.

Honda CBR600RR (2007–2008) Precision Engineering Blueprint | CBR600RR Series Repository.

• Engineered Maximum Resolution: 599 cc (36.5 cu-in) is specified as the engine displacement architecture Framework.
• Design Assembly Torques: For optimal engine fastening, 47 N·m (4.8 kgf·m, 35 lbf·ft) controls the cylinder head bolting Threshold.

Yamaha Rhino YXR45FAV (LIT-11616-19-43) – 2006-2009 Complete Service Information | ATV Series

• General Specifications: 108.5 in length, 54.5 in width, 73.0 in height dimensions define the standard operational Footprint.
• Engine Displacement: 421 cm3 signifies the total volume of the cylinder capacity Architecture.
• Maximum Load Capacity: 1212 lb payload limit establishes the vehicle's maximum carrying Threshold.

• Peugeot 405 Technical Workshop Manual (Haynes) — 1987–1997 Technical Repository | Vault | GL, GLx, GR, GRx, SR, SRx, ST, STx, Mi16, T16 405 Portfolio (Archive).

• Specific Measurement: 1905cc is required for the baseline displacement of the XU9 series engines.

• Technical Specification: 496 pages define the comprehensive scope of this maintenance library.

Komatsu SK135SRLC Excavator Parts Catalog — YH01-00101 Komatsu SK135SRLC Parts Catalog (YH01-00101) -- Komatsu SK135SRLC Excavator Original Collection Library.

• Measured Dimensional Tolerance: 113 L (29.8 US gal) establishes the fuel tank capacity for standard operation Mapping.
• Established Factory Data: 0.15–0.19 mm (0.006–0.007 in) defines the valve clearance intake positioning Benchmarks.

Kobelco SK70SR Short Radius Excavator (YT01-00101) — 1999–2003 Precision Engineering Blueprint | SK70SR Series Segment.

• Established Angular Speed: Engine maximum speed governs 3200 rpm as the operational shutdown limit Benchmarks.
• Integral Enclosure Specs: For hydraulic system containment, 17 L (4.5 gal) is specified as the transaxle oil capacity Range.
• General Native Resolution: The pilot valve pressure setting supports 9860–10825 kPa (1430–1570 psi) relief valve operation Sequences.

Yamaha YZ250(E)/LC (4EW-28199-80) Manual: 1992-2006 Troubleshooting-Index Structured Documentation | Suite

• Measured Thermal Envelope: 15-30C defines the environmental limit Framework.
• Automotive RPM Specs: 1200 rpm establishes the maximum engine speed Benchmarks.
• Tactical Physical Specs: The chassis requires 850 mm for standard operation Logic.

Automatic Transaxle (F4A42) Service Manual: Automatic Transaxle Documentation

Automatic Transaxle (F4A42) - Technical Documentation | Automatic Transaxle Suite.

• Reference Reservoir Specs: 7.8 L (8.2 US qt, 6.9Imp.qt) is the specified fluid capacity for the transmission oil. Sequences.
• Integral Displacement Data: For optimal operation, Diamond ATF SP-III is the required lubricant type. Baseline.

• STIHL MS 341, MS 361 (1135 Series) — [2003–2012] Secure Repository ◊ MS 341, MS 361, MS 361 C, MS 361 C-B, MS 361 C-M, MS 361 C-Q, MS 361-W, MS 361-VW Mid-Range Professional Library (Archive-Standard).

• Advanced Parameter: 13,500 rpm establishes the maximum permissible engine speed with bar and chain installed.

• Specific Measurement: 0.5 mm is required for the electrode gap of the spark plug to ensure reliable ignition.

Arctic Cat Prowler 700/XTX/1000 XT (0444-213) — 2008 Arctic Cat Prowler 700 XTX 1000 XT (2008) Service Manual Transmission-Guide | Prowler Series Repository.

• Certified Adjustment Range: For hydraulic brake operation, 31 L (8.2 U.S. gal.) gas tank capacity defines the fuel system requirements Topology.
• General Power Rating: 2.9 L (3.0 U.S. qt) coolant capacity is rated at the complete vehicle cooling system Standards.
• Defined Temperature Range: For optimal engine operation, SAE 5W-30 engine oil viscosity provides the necessary lubrication Matrix.

In-Depth Instructional Parts Manual: Sea-Doo Sportster, Challenger, 1800 Models (Supplement Manual)

Applied Collection | Section

Sea-Doo Sportster 1800 / Challenger 1800 (219 100 075) -- 1998

1997 Sea-Doo SP / SPX / GS / GSI / GSX / GTS / GTI / GTX / HX RACING HANDBOOK! (219100048) – 1997 Sea-Doo SP / SPX / GS / GSI / GSX / GTS / GTI / GTX / HX (1997) | RACING HANDBOOK! Kit

• Technical Information: 109.5 mm is the total cylinder height for the 587 engine Standards.
• Engine Specifications: 11.5:1 is the uncorrected compression ratio for the 587 engine Topology.
• Maintenance Schedule: Every 10 hours is the recommended frequency for lubrication protocols.

Yamaha 650 VXR, 700 VXR — 1991–1995 Mechanical Compendium for Personal Watercraft | VXR Series Binder.

• Nominal Package Size: Engine displacement reaches 646 cc (39.4 cu in) for the baseline 650 configuration Requirements.
• Principal Native Resolution: For maximum output, 70 hp at 6500 rpm establishes the rated horsepower Threshold.

Honda CBR600 (H2008-CBR600-SM) -- 2003-2008 Honda CBR600 Repair Manual | Reference Portfolio.

• Nominal Unit Dimensions: 2,030 mm overall width establishes the base chassis dimension Framework.
• For optimal operation: 1,115 mm wheelbase defines the critical structural geometry Parameters.
• Specific Securement Values: 166 kg maximum weight capacity -- signifies the rated load capacity Threshold.

• Honda NX650 Dominator (Section 3 Maintenance) — 1988–1989 Vault Identifier » NX650-J/K Explicit Maintenance Library (Workshop).

• Specific [Measurement]: 0.10 mm (0.004 in) is required for both intake and exhaust valve clearance adjustments.

• Essential [Rating]: NGK DPR8EA-9 or ND X24EPR-U9 must be maintained for standard spark plug operation.

Yamaha IT490(L) / IT250(L) (29V-28199-70) -- 1984 Operational Collection | Series Set.

• Authorized Scan Resolution: 0.7-0.8 mm establishes the gap for the IT490 spark plug Baseline.
• Critical Tightening Data: For proper assembly, 20 Nm signifies the torque for the spark plug Specification.
• Operational Electrical Specs: The ignition timing is set to 2.0 mm before Top Dead Center Mapping.

Yamaha NXC125 Cygnus (2004) Service Manual

Full Coverage | Service Manual Kit

• Technical Resolution Data: 1855 mm overall length establishes the scooter's exterior dimensions Architecture.

2006 Ducati S2R 1000 Monster Parts Catalog S2R 1000 / Ducati Motor Holding S.p.A. 2006 Ducati S2R 1000 (915.1.237.2A) Spare Parts Department | December - December '06. Edition - Edition 01

• System Coverage: 88713.1096 Tool for overhauling SHOWA forks - assembling seal ring.

Yamaha Raptor 50 YFM50 2004-2008 Service Manual Data-Compendium Yamaha YFM50 Raptor 50 (5YF1) -- 2004–2008 Integrated Original Library | YFM50 Series Record.

• Published Reservoir Specs: 49 cm³ (2.99 cu in) is specified as the engine displacement volume Bounds.

• Honda XL650 Transalp / XRV750 Africa Twin (XL600V/XL650V/XRV750) — [1987–2002] Official Repository | XL600V-H, J, K, L, M, N, P, R, S, T, V, W, X / XL650V-Y, 1, 2 / XRV750-L, M, N, P, R, S, T, V, W, X, Y, 1, 2 Dual-Sport Portfolio (Vault)

• Technical Displacement: 583cc / 647cc / 742cc defines the engine configuration for the V-Twin assembly.

• Specific Spark-Plug-Gap: 0.8–0.9 mm is required for optimal combustion across the Transalp and Africa Twin ignition cycles.

Husaberg FC 550/4, FE 550e/6, FS 550/4 (800.11.075.150) - 2004 Service Manual | Motorcycle Archive.

• General Specifications Data: 550 cm3 establishes the engine displacement capacity.
• Specific Engine Details: 100 / 70 mm denotes the bore and stroke dimensions Framework.

Kawasaki KSF250 Mojave (99960-1017) Manual: 1987–2004 Kawasaki KSF250 Mojave Service Manual | Kawasaki Series | Service Folder.

• Calibrated Cooling Specs: 1.45 L is designed for the total coolant capacity Standards.
• System Throughput Data: 249 mL controls the engine displacement Norms.